journal article·2003-08

Machining stability in turning operation when cutting with a progressively worn tool insert

M.S. Fofana, K.C. Ee, I.S. Jawahir

Wear· Volume 255· Issue 7-12
Publisher page

Abstract

Our investigation is aimed at understanding the influence of the interactions between chatter instability and tool-wear/tool-life in turning operations. An integrated experimental and analytical study has been conducted to examine changes in tool-wear with chatter instability for different cutting conditions and progressively worn cutting tools. The major tool-wear/tool-life parameters for typical grooved tools and the corresponding cutting forces in three directions are measured at varying time intervals. The variations in the wear parameters and the cutting forces are compared with the changes in stability charts of the turning operation. Explicit analytical expressions are derived for predicting the onset of chatter instability and tool-wear.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Force decomposition model for tool-wear in turning with grooved cutting tools
2. An investigation of effects of chip flow on tool-wear in machining with complex grooved tools10.1016/0043-1648(94)06572-1 ↗
3. A new parametric approach for the assessment of comprehensive tool wear in coated grooved tools10.1016/S0007-8506(07)62273-2 ↗
4. S.A. Tobias, Machine–Tool Vibration, Blackie, London, 1965.
5. Determination of dynamic cutting coefficients from steady state cutting data10.1016/0020-7357(77)90024-5 ↗
6. A theory of nonlinear regenerative chatter10.1115/1.3438305 ↗
7. Theory of finite amplitude machine instability
8. F.C. Moon (Ed.), Dynamics and Chaos in Manufacturing Processes, Wiley, New York, 1998.
9. C.A. van Luttervelt, T.H.C. Childs, I.S. Jawahir, F. Klocke, P.K. Venuvinod, Present situation and future trends in modelling of machining operations, Progress Report of the CIRP Working Group on Modelling of Machining Operations, Ann. CIRP 47 (2) (1998) 587–626.10.1016/S0007-8506(07)63244-2 ↗
10. J.S. Jawahir, A.K. Balaji, R. Stevenson (Eds.), in: Proceedings of the CIRP, International Workshop on Modelling of Machining Operation, Georgia Institute of Technology, Atlanta, Georgia, USA, University of Kentucky Publishing Services, Lexington, 1998.
11. Sources of nonlinearities, chatter generation and suppression in metal cutting10.1098/rsta.2000.0750 ↗
12. Variation in friction coefficient with tool wear10.1016/0043-1648(83)90119-9 ↗
13. Tool condition monitoring system
14. Flank wear estimation under varying cutting conditions
15. A study on the relationships between static/dynamic cutting force components and tool-wear10.1115/1.1362321 ↗
16. Friction-induced vibration, chatter, squeal, and chaos. Part 1. Mechanics of contact and friction10.1115/1.3111079 ↗
17. Self-induced oscillations of friction process parameters10.1016/S0043-1648(99)00343-9 ↗
18. D. Maus, M. Wiese, G. Warnecke, Experimental investigation of friction-induced vibrations in turning, Trans. NAMRI XXX (2002) 477–484.
19. J.K. Hale, S.M.V. Lunel, Introduction to Functional Differential Equations, Springer, New York, 1993.10.1007/978-1-4612-4342-7 ↗
20. M.S. Fofana, An illustrative reduction approach in machining dynamics, Trans. NAMRI XXX (2002) 469–476.
21. The effect of nonlinearity in turning operation10.1023/A:1015203721926 ↗