journal article·2009-09

Investigation of tool wear in High Speed Machining by using a ballistic set-up

G. List, G. Sutter, X.F. Bi

Wear· Volume 267· Issue 9-10
Publisher page

Abstract

Investigation of tool wear in High Speed Machining (HSM) by using a ballistic set-up is proposed. An originality of this work consists in analyzing the previous models in sight of the real temperatures fields measured during the cutting process. Results show the high potentiality of the presented device associated with wear modeling. The chip formation and the temperature distribution are observed in real time under perfect orthogonal cutting conditions at very high cutting speeds with an intensified CCD camera. Observations highlight the importance of the evolution of the tool-chip contact during the crater wear process, especially when low feeds are selected. For low feeds, the crater profile seems control the rolling-up of the chip which also participates to accentuate the wear. Experimental results such as temperature distribution and contact length are input into diffusion wear models under different assumptions for predicting the evolution of crater profiles. Taking into account the mechanical action of the chip on the tool rake face, the prediction of tool wear is reached with a great accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. State of the Art of High-Speed Machining
2. Wear mechanisms of cutting tools in high-speed cutting processes10.1016/S0043-1648(01)00620-2 ↗
3. Childs · 2000
4. Trent · 2000
5. Basic investigation of tool wear
6. A Transport-diffusion Equation in Metal Cutting and Its Application to Analysis of the Rate of Flank Wear
7. Modeling of CBN Tool Flank Wear Progression in Finish Hard Turning
8. Contact Rubbing of Flat Surfaces10.1063/1.1721448 ↗
9. The wear of metals under unlubricated conditions
10. The Mechanism of Crater Wear of Cemented Carbide Tools10.1115/1.4013947 ↗
11. Analytical prediction of three dimensional cutting process Pt. 3
12. Modeling tool wear in cemented-carbide machining alloy 71810.1016/j.ijmachtools.2008.03.001 ↗
13. Tool wear and tool life
14. Tribology of tool-chip interface and tool wear mechanisms10.1016/S0257-8972(01)01488-8 ↗
15. Machinability and damage mechanisms of cutting tools, Bulletin du cercle d’étude des métaux
16. Diffusion wear of cutting tools
17. Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools10.1016/j.wear.2006.06.022 ↗
18. A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology10.1016/S0301-679X(01)00068-8 ↗
19. The effect of tool-chip contact area in metal machining10.1115/1.4012614 ↗
20. The role of tool-chip contact length in metal cutting10.1016/0924-0136(93)90122-M ↗
21. A machining theory for predicting chip geometry, cutting forces etc. from work material properties and cutting conditions10.1098/rspa.1980.0097 ↗
22. Prediction of tool-chip contact length using a new slip-line solution for orthogonal cutting10.1016/S0890-6955(03)00155-X ↗
23. An integrated approach to evaluating the tribo-contact for coated cutting inserts10.1016/S0043-1648(00)00324-0 ↗
24. An investigation of the tool-chip contact length and wear in high-speed turning of EN19 steel10.1243/0954405041486064 ↗
25. Experimental investigation of overall machining performance with overall progressive tool wear at different tool faces10.1016/0043-1648(94)90270-4 ↗
26. Chip geometries during high speed machining for orthogonal cutting conditions10.1016/j.ijmachtools.2004.09.018 ↗
27. Temperature measurement by visible pyrometry: orthogonal cutting application10.1115/1.1833361 ↗
28. Temperature fields in a chip during high-speed orthogonal cutting—an experimental investigation10.1016/j.ijmachtools.2006.11.012 ↗
29. Wear behaviour of cemented carbide tools in dry machining of aluminium alloy10.1016/j.wear.2005.02.056 ↗
30. Stress distribution at the interface between tool chip in machining
31. Experiment measurement of temperature distribution in the chip generated during high speed orthogonal cutting process
32. The influence of wear on the temperature distribution at the rake face