journal article·2013-04

Dry sliding tribological properties and subsurface structure of nanostructured copper at liquid nitrogen temperature

B. Yao, Z. Han, K. Lu

Wear· Volume 301· Issue 1-2
Publisher page

Abstract

Bulk nanostructured Cu sample with nano-scale twin bundles embedded in nano-sized grains was synthesized by using dynamic plastic deformation (DPD) technique. Dry sliding tribological properties of the DPD Cu and the coarse grained (CG) Cu samples were investigated under liquid nitrogen temperature (LNT) in comparison with room temperature (RT) conditions. Experimental results show that the wear volume under LNT was much larger than that under RT for both sets of Cu samples. The DPD Cu sample exhibits almost same wear volume compared with the CG Cu when sliding at LNT, which is quite different from the enhanced wear resistance for the DPD Cu sample sliding at RT. A similar steady worn subsurface structure was formed for two Cu samples, which was constituted by heavily deformed nanostructured mixing layer (NML) and ultra-fine grained dynamic recrystallization (DRX) layer. Comparing with the worn subsurface structure at RT, lower sliding temperature could effectively suppress grain growth within the DRX layer, resulting in a cracked NML and extremely fine grains in the DRX layer. When sliding at LNT, quick propagation of cracks from NML into DRX layer and flaking rate of NML are determining the wear process which results in a high wear rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Ductility of nanostructured materials10.1557/S0883769400051551 ↗
2. Structure and mechanical behavior of bulk nanocrystalline materials10.1557/S088376940005154X ↗
3. Mechanical properties of fully dense nanocrystalline metals10.1016/S1359-6462(03)00399-3 ↗
4. Friction and wear behaviors of nanostructured metals
5. The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings10.1016/S1359-6462(00)00625-4 ↗
6. Hall–Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel10.1016/S1359-6462(02)00062-3 ↗
7. A comparative study on the tribological behavior of nanocrystalline nickel and cobalt coatings correlated with grain size and phase structure10.1016/j.matchemphys.2005.10.014 ↗
8. Effect of grain size on friction and wear of nanocrystalline aluminum10.1016/0921-5093(95)10016-4 ↗
9. Fretting wear behavior of nanocrystalline surface layer of copper under dry condition10.1016/j.wear.2007.11.004 ↗
10. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
11. The role of substrate plasticity on the tribological behavior of diamond-like nanocomposite coatings10.1016/j.actamat.2007.12.048 ↗
12. Scale-dependent subsurface deformation of metallic materials in sliding10.1016/j.triboint.2009.10.009 ↗
13. Deformation substructures associated with very large plastic strains10.1016/0956-716X(92)90459-R ↗
14. Near surface microstrucutres developing under large sliding loads10.1007/BF02645312 ↗
15. A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding10.1016/j.wear.2009.01.030 ↗
16. The evolution of tribomaterial during sliding: a brief introduction10.1007/s11249-009-9498-3 ↗
17. Nanostructures generated by explosively driven friction: experiments and molecular dynamics simulations10.1016/j.actamat.2009.07.034 ↗
18. Friction-induced ultra-fine and nanocrystalline structures on metal surfaces in dry sliding10.1016/j.triboint.2009.12.040 ↗
19. EBSD, SEM and FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid10.1016/j.wear.2010.04.023 ↗
20. The effects of sliding velocity and sliding time on nanocrystalline tribolayer development and properties in copper10.1016/j.wear.2008.12.102 ↗
21. Thermal stability of nanocrystalline Ni10.1016/0921-5093(95)09864-X ↗
22. Thermal stability of electrodeposited nanocrystalline cobalt10.1016/S1359-6462(00)00628-X ↗
23. An investigation of thermal stability and microhardness of electrodeposited nanocrystalline nickel-21% iron alloys10.1016/S1359-6454(03)00215-5 ↗
24. Microstructural evolution, microhardness and thermal stability of HPT-processed Cu10.1016/S0921-5093(00)00919-9 ↗
25. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
26. Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling10.1016/j.actamat.2010.04.005 ↗
27. Dynamic plastic deformation (DPD): a novel technique for synthesizing bulk nanostructured metals
28. Microstructure evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperature10.1016/j.actamat.2007.09.020 ↗
29. Correlation between wear resistance and subsurface recrystallization structure in copper10.1016/j.wear.2012.07.008 ↗
30. Dry sliding tribological properties of nanostructured copper subjected to dynamic plastic deformation10.1016/j.wear.2010.12.020 ↗
31. Nanoscale structural refinement via deformation twinning in face-centered cubic metals10.1016/j.scriptamat.2009.02.008 ↗