journal article·2001-08

Slurry erosion resistance of fusion-bonded epoxy powder coating

Suzhen Luo, Yugui Zheng, Jin Li, Wei Ke

Wear· Volume 249· Issue 8
Publisher page

Abstract

Erosion resistance of fusion-bonded epoxy powder coating in emery sand slurry containing 1 wt.% NaCl has been investigated by using modified rotating disk rig. The effects of emery sand content, flow velocity and diameter of emery particle on the erosion resistance of the coating have been studied through mass loss test and SEM observation. The results showed that the mass loss rate of the coating increased according to a power law with the flow velocity (V), emery particle content (C) and diameter of emery particle (D). The mass loss rate (E) of the coating could be described by an empirical equation, namely E alpha V-n1 C-n2 D-n3. The relative large values of n(1) and n(3) compared with n(2) indicated that the flow velocity and diameter of emery particle were the dominant factors. The critical flow velocity of the coating in slurry containing 10, 15, 20 wt.% emery particle (112 mum) was about 7, 6, 5.8 m/s, respectively. Under the test conditions, the first critical diameter (FCD) and the second critical diameter (SCD) of emery particle were about 80 and 410 mum, respectively. Within 80-410 mum, the influence of mean diameter of emery particle on erosion was significant. Therefore, the coating is suitable for the relative mild conditions of liquid-particle two-phase flow such as low flow velocity and small particles. (C) 2001 Published by Elsevier Science B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · Coal Combustion and Slurry Processing · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Laser adding coating against wear and its application to mining machine parts10.1016/S0043-1648(97)00018-5 ↗
2. The synergistic effects between erosion and corrosion in acidic slurry medium10.1016/0043-1648(95)07132-6 ↗
3. X. Ma, F. Lin, H. Shao, Study on the wear-resistant adhesive coating in scouring, Lubr. Eng. (4) (1991) 11 (in Chinese).
4. Slurry wear properties of pump lining materials10.1016/S0043-1648(97)00055-0 ↗
5. J.X. Zhang, M.O.W. Richardson, G.D. Wilcox, et al., Assessment of resistance of nonmetallic coatings to silt abrasion and cavitation erosion in a rotating disk test rig, Wear 194 (1996) 149.10.1016/0043-1648(95)06823-6 ↗
6. G.I. Parslow, D.J. Stephenson, J.E. Strutt, et al., Paint layer erosion resistance behavior for use in a multilayer paint erosion indication technique, Wear 212 (1997) 103.10.1016/S0043-1648(97)00118-X ↗
7. Y. Zheng, Z. Yao, K. Long, S. Li, W. Ke, Corrosion Sci. Protect. Tech. 5(4) (1993) 286 (in Chinese).
8. S. Luo, Y. Zheng, J. Li, L. Zhang, Z. Yao, W. Ke, Characteristic of electrochemical impedance spectroscopy of medium transport in fusion-bonded epoxy powder coatings, Corrosion Sci. Protect. Tech. (2001) (in Chinese), in press.10.1016/S0043-1648(01)00808-0 ↗
9. J.S. Smart, The meaning of the API-RP-14-E formula for erosion–corrosion in oil and gas production, Corrosion ’91 Paper no. 468 Houston, NACE, TX, 1991.10.5006/C1991-91468 ↗
10. Y. Lin, J. Liu, X. Yong, H. Li, C. Cao, Application of numerical method to study of flow-induced corrosion, J. Chin. Soc. Corrosion Protect. 19 (1) (1999) 1 (in Chinese).
11. On the particle size in slurry erosion
12. Blatt · Corrosion · 1989 · 45 · 79310.5006/1.3584985 ↗
13. Slurry abrasion of polymer under simulated submarine conditions10.1016/0043-1648(88)90074-9 ↗
14. Erosion in multiphase systems10.1016/0043-1648(86)90093-1 ↗
15. S. Turenne, Y. Chatigny, D. Simard, et al., The effect of abrasive particle size on the slurry erosion resistance of particulate-reinforced aluminum alloy, Wear 141 (1990) 147.10.1016/0043-1648(90)90199-K ↗
16. The effect of impingement angle on slurry erosion10.1016/0043-1648(91)90274-X ↗
17. Effect of sand concentration on the erosion of materials by a slurry jet10.1016/0043-1648(89)90116-6 ↗
18. An investigation on the relationship between erosion resistance and curing degree of epoxy powder coating