Tribological performance of thin organic permanent coatings deposited on 55%Al–Zn coated steel — influence of coating composition and thickness on friction and wear
Source abstract
Abstract
Dry lubricants are today increasingly being used in various types of sheet metal forming operations. Among these, permanent coatings, based on organic resins are the only lubricants which have the potential to increase the formability without additional lubrication, serve as temporary corrosion protection during transportation and, finally, serve as a pre-treatment before subsequent painting. In the present study, the influence of coating composition and thickness on the friction and wear behaviour of different thin organic permanent coatings deposited on 55%Al–Zn coated steel sheet have been evaluated by various types of laboratory tests. Surface profilometry, scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and time-of-flight secondary ion mass spectrometry (ToF–SIMS) were used in order to characterise and model the tribological behaviour of the coatings. The results obtained show that the tribological properties of thin organic permanent coatings are strongly influenced by the coating thickness. In order to reduce problems associated with high friction and galling, the coating must be deposited with a uniform thickness, i.e. uncoated regions must be avoided. Furthermore, the addition of various types of additives can be used in order to further improve the tribological performance of these types of coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Schedin · Wear · 1994 · 179 · 12310.1016/0043-1648(94)90229-1 ↗
2. J.A. Schey, Tribology in Metal Working, Friction, Lubrication and Wear, ASM International, New York, 1983.
3. D.J. Robbins, C.A. Gosselin, F.A. Myers, Thermoplastic Acrylic Coated Steel Sheet, US Patent No. 5,151,297, 29 September 1992.
4. S. Suzuki, N. Totsuka, Kurisu, T. Ichida, T. Mouri, Kawasaki Steel Technical Report 27 (1992) 46–52.
5. Y. Hosoda, T. Shiota, N. Suzuki, S. Ikeda, Y. Suzukawa, M. Nakatsukasa, S. Osako, Soc. Automot. Eng. (USA) (1993) 397–402.
6. Y. Hirose, T. Sakane, S. Wakano, C. Sudo, Soc. Automot. Eng. (USA) (1993) 255–260.
7. Wakano · Steel Iron Eng. · 1993 · 70 · 9
8. Okuma · NKK Tech. Rev. (Jpn.) · 1993 · 68 · 43
9. F.M. Androsch, K. Kosters, J. Meinhardt, U. Nagel, North Am. Deep Drawing Res. Group (USA) (1994) 91–107.
10. Kim · Surf. Coat. Technol. · 1994 · 70 · 3710.1016/0257-8972(94)90072-8 ↗
11. T. Katsumi, Y. Miyauchi, K. Saito, H. Kanai, Iron Steel Soc. AIME (USA) (1995) 449–453.
12. Miyoshi · NKK Tech. Rev. (Jpn.) · 1998 · 79 · 15
13. N. Maurus, Minerals, Met. Mater. Soc. AIME (USA) (1998) 349–356.
14. T. Katsumi, Y. Miyauchi, K. Saito, H. Kanai, Iron Steel Soc. AIME (USA) (1995) 449–453.
15. Carlsson · Wear · 2001 · 247 · 8810.1016/S0043-1648(00)00521-4 ↗
16. S. Jacobsson, M. Olsson, P. Hedenqvist, O. Vingsbo, Scratch testing, ASM Handbook, Vol. 18, Friction, Lubrication and Wear Technology, ASM International, New York, 1992.
17. K.C. Ludema, R.G. Bayer (Eds.), ASTM Special Technical Publication 1105, 1994.
18. D. Briggs, Surface Analysis of Polymers by XPS and Static SIMS, Cambridge University Press, Cambridge, 1998, pp. 108–112.10.1017/CBO9780511525261 ↗
19. J.C. Vickerman, D. Briggs, A. Henderson, The Static SIMS Library, Surface Spectra Ltd., Manchester, UK, 1998.
20. Briggs · Surf. Interface Anal. · 1982 · 4 · 10910.1002/sia.740040306 ↗
21. Benjamin · AIChE J. · 1995 · 41 · 104510.1002/aic.690410502 ↗