journal article·2012-06

Tribofilm formation of lightly loaded self mated alumina contacts

J. Olofsson, U. Bexell, S. Jacobson

Wear· Volume 289
Publisher page

Abstract

Abstract A tribofilm is formed on alumina surfaces that have been slid against alumina surfaces. The tribofilm is formed by alumina wear particles that have been ground, agglomerated and tribosintered to a film. The tribofilm smoothens out the surface topography and fills up cavities. Tribofilms on alumina surfaces have been investigated with respect to surface appearance, hardness and chemical composition. Surface preparation and surrounding humidity have shown to affect the character and lateral distribution of the tribofilm. The tribofilm that was formed in humid air was softer than the tribofilm formed in dry air. XPS analysis revealed the chemical shift of the Al 2p peak did not differ between the tribofilms that was formed in different humidity, nor the unworn reference surface, finding that no hydroxide was found on the alumina surfaces. Also, no tribochemical changes could be detected by ToF-SIMS analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lubricants and Their Additives · Metal and Thin Film Mechanics · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. On the role of tribofilm formation on the alumina drive components of an ultrasonic motor10.1016/j.wear.2009.01.020 ↗
2. Influence from humidity on the alumina friction drive system of an ultrasonic motor10.1016/j.triboint.2009.05.010 ↗
3. Wear mechanisms and tribo mapping of Al2O3 and SiC in dry sliding10.1016/0043-1648(94)90350-6 ↗
4. Distinct wear characteristics of submicrometer-grained alumina in air and distilled water: a brief analysis on experimental observation10.1111/j.1551-2916.2007.01782.x ↗
5. Surface modification of ceramics for improved tribological properties10.1016/S0272-8842(99)00065-6 ↗
6. The effect of tribofilm formation and humidity on the friction and wear properties of ceramic materials10.1115/1.2920851 ↗
7. Investigation of sliding wear surfaces in alumina using transmission electron microscopy10.1016/j.stam.2006.11.007 ↗
8. The formation of aluminium hydroxide in the sliding wear of alumina10.1016/0043-1648(92)90270-I ↗
9. Genesis and role of wear debris in sliding wear of ceramics10.1016/S0043-1648(00)00465-8 ↗
10. Jahanmir · 1994
11. Modeling and microstructural modification of alumina ceramic for improved tribological properties10.1016/S0043-1648(96)07293-6 ↗
12. K. Adachi, E. Kato, R. Inoue, R. Takizawa, Mechanism of smooth tribo-film formation of ceramics in sliding contact. International Tribology Conference, Yokohama, 1995.
13. Effect of contact pressure and load on wear of alumina10.1016/S0043-1648(01)00739-6 ↗
14. J. Olofsson, S. Jacobson, The influence of grain size and surface treatment of the tribofilm formation on alumina components. Wear Submitted for publication.
15. Formation of smooth wear surfaces on alumina ceramics by embedding and tribo-sintering of fine wear particles10.1016/S0043-1648(00)00468-3 ↗
16. Tribological characterization of alumina and silicon carbide under lubricated sliding10.1016/0301-679X(93)90016-T ↗
17. An electron microscopy study of worn ceramic surfaces10.1016/0301-679X(93)90075-C ↗
18. Mechanism of transfer film formation during repeat pass sliding of ceramic materials10.1016/0043-1648(90)90083-M ↗
19. Alumina in unlubricated sliding point, line and plane contacts10.1016/0043-1648(93)90240-M ↗
20. Environmental effects on wear behaviour of alumina10.1016/0043-1648(93)90459-Y ↗
21. The effect of water vapor on the agglomeration of wear particles of ceramics10.1016/S0043-1648(96)07274-2 ↗
22. An improved technique for determing hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. Angular distribution and sputtering yield of Al and Al2O3 during 40 key argon ion bombardment10.1016/0042-207X(82)93847-7 ↗
24. Etch-stop technique for patterning of tunnel junctions for a magnetic field sensor10.1088/0960-1317/21/4/045014 ↗
25. NPL, Ar Sputter Yields, Group 1, Li to Si, 45, NPL, 2005.
26. Moulder · 1995
27. Valence band spectra of aluminum oxides, hydroxides, and oxyhydroxides interpreted by Xα Calculations10.1021/ac00045a006 ↗
28. Wear mechanisms of glass-infiltrated alumina sliding against alumina in water10.1111/j.1551-2916.2005.00051.x ↗
29. Briggs · 1983 · vol. 1
30. Surface analysis of oxidized aluminum10.1002/sia.740210504 ↗