A preliminary study on smoothing efficiency of surface irregularities by hydrodynamic polishing process
Source abstract
Abstract
Abstract This study is to investigate the efficiency of surface irregularity reduction by the hydrodynamic polishing process under the semi-contact lubricating condition. Several sets of experiments were conducted to examine the magnitude variation of work’s surface irregularities in the smoothing process. The experiments indicated that the efficiency of surface irregularity reduction was related to the magnitude and wavelength of work’s surface irregularities. The efficiency is high when the magnitude is high. On the other hand, it is low if the wavelength is large. The tool speed showed little effect on the efficiency. The experimental study indicated that there was an ultimate value of surface irregularities attainable in a given polishing condition. This ultimate value was shown to be related to the wavelength of surface irregularities. An analytical model was also proposed to examine the properties of smoothing efficiency. The smoothing efficiency was shown to be linearly proportional to the magnitude of surface irregularities. It will be close to zero if the magnitude is reduced to a certain value.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. On machining rate of hydrodynamic polishing process10.1016/0043-1648(95)06614-4 ↗
2. Investigation on the surface topography in polishing using atomic force microscopy10.1016/S0007-8506(07)63116-3 ↗
3. Studies on polishing of glass moulds after lapping with hard and soft pellets10.1016/S0924-0136(96)02445-4 ↗
4. Semi-ductile grinding and polishing of pyrex glass10.1016/S0924-0136(98)00070-3 ↗
5. Polishing rate fro (1 0 0) and (1 1 0) surfaces10.1016/S0378-4371(96)00161-6 ↗
6. Elastic emission machining10.1016/0141-6359(87)90029-8 ↗
7. Effects of surface irregularities on machining rate of hydrodynamic polishing process10.1016/0043-1648(96)07220-1 ↗
8. On machining rate of hydrodynamic polishing process under semi-contact lubricating condition10.1016/S0043-1648(98)00236-1 ↗
9. An experimental study on machining rate distribution of hydrodynamic polishing10.1016/S0043-1648(98)00335-4 ↗
10. A. Papoulis, Probability, Random Variables, and Stochastic Processes, McGraw-Hill, Singapore, 1991.
11. Micro-elastohydrodynamic lubrication of an elliptical contact with transverse and three dimensional sinusoidal roughness10.1115/1.3261980 ↗
12. The effects of surface texture on EHL point contacts10.1115/1.2837093 ↗