journal article·2005-02

Effect of bridged cyclotriphosphazenes as lubricants on the tribological properties of a steel-on-steel system

Weimin Liu, Jiamei Zhu, Yongmin Liang

Wear· Volume 258· Issue 5-6
Publisher page

Abstract

Abstract The friction and wear behavior of a steel-on-steel contact lubricated by phosphazene-type additive tetrakis(3-trifluoromethylphenoxy)-bis(4-fluorophenoxy)-cyclotriphosphazene (X-1P) and novel synthetic bridged cyclotriphosphazenes was investigated on a oscillating friction and wear tester. The thermal stability of the lubricants was investigated by means of thermogravimetric analysis. It was found that bridged cyclotriphosphazenes give lower wear volume loss and higher thermal stability than X-1P. In particular, the bridged cyclotriphosphazene with aromatic-ring side branch structures has the best antiwear ability and thermal stability among the investigated lubricants. The worn surfaces were analyzed by means of scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS). It was found that tribochemical reaction was involved in the sliding of steel against steel under the lubrication of the synthetic lubricants, with the generation of a protective layer composed of inorganic fluoride FeF 2 and organic compounds consisting of C, F, O, N and P, which contributed to improve the friction and wear behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Flame retardant materials and properties · Tribology and Wear Analysis · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Cyclotriphosphazenes as potential lubricants for thin film hard discs10.1080/10402009508983453 ↗
2. Oxidative stability and degradation mechanism of a cyclotriphosphazene lubricant10.1021/ac960632x ↗
3. Synthesis and characterization of per/polyfluorophenoxy derivations of octachlorocyclotetraphosphazenes10.1016/S0022-1139(01)00516-4 ↗
4. Development and tribological properties of new cyclophosphazene high temperature lubricants for aircraft gas turbine engines10.1080/10402009208982086 ↗
5. Tribo-evaluation of high temperature candidate fluids in a sliding “TBOD” Bench tester10.1080/10402009508983381 ↗
6. Environmental effects on phosphazene lubricated computer hard disk10.1109/20.334016 ↗
7. Phosphorus-nitrogen compounds. Part 58. The reactions of hexachlorocyclotriphosphazatriene with ethane-, 1, 3-propane- and 1,4-butane-diols, spiro, ansa, bridged and dangling derivatives and their 31P and 1H nuclear magnetic resonance spectra10.3987/COM-88-S17 ↗
8. Reaction of chlorocyclopho-sphazenes with difunctional regents10.3987/REV-90-418 ↗
9. Synthesis and structure of small-molecule phosphazene rings bearing fused-ring aryloxy side groups: Models for optically useful high polymers10.1039/dt9950003521 ↗
10. Adsorption of model compounds of lubrication on nascent surfaces of mild and stainless steels under dynamic conditions10.1080/10402008808981847 ↗
11. Friction studies in ultrahigh vacuum of Fe surface with thin films from exposure to perfluorodiethylether10.1116/1.577275 ↗
12. A model for the boundary film formation and tribological behavior of a phosphazene lubricant on steel10.1080/10402009508983469 ↗
13. Relationship between molecular structures and tribological properties of phosphazenes lubricants10.1016/S0043-1648(01)00877-8 ↗