Role of sliding-induced tribofilms on fracture of particles in aluminium–silicon alloys
Source abstract
Abstract
Abstract Mechanical properties of tribofilms formed on the surfaces of silicon particles in Al–Si alloys when placed in sliding contact against a steel counterface at 100 °C under boundary lubrication condition were studied using instrumented nano-indentation techniques and cross-sectional TEM. With an average thickness of ∼82 nm, the tribofilms had a hardness of 3.45±0.17 GPa and an elastic modulus of 116.30±6.64 GPa. Deformation and fracture characteristics of tribofilm-covered silicon particles were investigated using micro-indentation techniques and compared with those without tribofilms. The increase in Weibull modulus, m , from 1.2 (for silicon particles without tribofilm) to 4.3 (for silicon covered with tribofilm) showed that the tribofilm decreased the probability of lateral crack propagation that caused chipping fracture in silicon. The extent of pressure-induced phase transformation of silicon particles with a diamond cubic crystal structure to Si-III (bcc) and Si-XII (rhombohedral) was reduced due to a decrease in the ‘effective’ elastic modulus of tribofilm-covered silicon. It was also shown that silicon’s R -curve behaviour (lateral crack stability) was improved due to reduction in the driving force that was available for crack growth in tribofilm-covered silicon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Evaluation of the reciprocating-wear behavior of unlubricated hypereutectic Al–Si alloys10.1080/10402000308982618 ↗
2. A parametric study of the relationship between microstructure and wear resistance of Al–Si alloys10.1016/j.wear.2006.03.043 ↗
3. Origins of the wear resistance of Al–Si cylinder bore surfaces studies by surface analytical tools10.1016/j.triboint.2007.01.015 ↗
4. Investigation of wear induced surface and subsurface deformation in a linerless Al–Si engine10.1016/j.wear.2010.04.012 ↗
5. Microstructural evolution of a eutectic Al–Si engine subjected to severe running conditions10.1016/j.msea.2009.01.025 ↗
6. Subsurface sliding wear damage characterization in Al–Si alloys using focused ion beam and cross-sectional TEM techniques10.1016/j.wear.2010.09.007 ↗
7. Ultra-mild wear of a hypereutectic Al-18.5wt.% Si alloy10.1016/j.wear.2007.10.002 ↗
8. Micromechanisms of low load wear in an Al-18.5 % Si alloy10.1016/j.wear.2008.11.011 ↗
9. Micromechanisms and mechanics of ultra-mild wear in Al–Si alloys10.1016/j.actamat.2008.07.043 ↗
10. Dynamics of dual film formation in boundary lubrication of steels. Part I. Functional nature and mechanical properties10.1016/0043-1648(91)90292-3 ↗
11. Dynamics of dual film formation in boundary lubrication of steels. Part II. Chemical analyses10.1016/0043-1648(91)90293-4 ↗
12. Dynamics of dual film formation in boundary lubrication of steels. Part III. Real time monitoring with ellipsometry10.1016/0043-1648(91)90294-5 ↗
13. Relationship between mechanical properties and structures of zinc dithiophosphate anti-wear films10.1098/rspa.1999.0497 ↗
14. The history and mechanisms of ZDDP10.1023/B:TRIL.0000044495.26882.b5 ↗
15. Ultra-mild wear mechanisms of Al-12.6wt.% Si alloys at elevated temperature10.1016/j.wear.2011.01.091 ↗
16. Indentation-induced subsurface damage in silicon particles of Al–Si alloys10.1016/j.msea.2009.08.052 ↗
17. Indentation fractography: a measure of brittleness10.6028/jres.089.024 ↗
18. On the mode of chipping fracture in brittle solids10.1007/BF00541407 ↗
19. Equilibrium penny-like cracks in indentation fracture10.1007/BF00557479 ↗
20. First-principles pseudopotential study of the structural phases of silicon10.1103/PhysRevB.51.9652 ↗
21. Reversible pressure-induced structural transitions between metastable phases of silicon10.1103/PhysRevB.50.13043 ↗
22. Structure and properties of silicon XII: a complex tetrahedrally bonded phase10.1103/PhysRevB.52.4072 ↗
23. Crystal data for high-pressure phases of silicon10.1103/PhysRevB.34.4679 ↗
24. Transmission electron microscopy observation of deformation microstructure under spherical indentation in silicon10.1063/1.1332110 ↗
25. Lubricating oil influence on exhaust hydrocarbon emissions from a gasoline fueled engine10.1016/j.triboint.2011.07.003 ↗
26. Novel scheme for the preparation of transmission electron microscopy specimens with a focused ion beam10.1116/1.586537 ↗
27. On the hardness of coated systems10.1016/S0257-8972(97)00522-7 ↗
28. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
29. Micro-Raman analysis of residual stresses and phase transformations in crystalline silicon under microindentation10.1557/JMR.1997.0302 ↗
30. Size dependent hardness of silver single crystals10.1557/JMR.1995.0853 ↗
31. A simple predictive model for spherical indentation10.1557/JMR.1993.0297 ↗
32. Use of indentation fracture to determine fracture toughness
33. Raman microscopy investigations of structural phase transformations in crystalline and amorphous silicon due to indentation with a Vickers diamond at room temperature and at 77K10.1088/0022-3727/36/11/310 ↗
34. Minor · Philosophical Magazine · 2005 · 85 · 32310.1080/14786430412331315680 ↗
35. McClintock · 1965
36. Tada · 1973
37. Artificial slow crack growth under constant stress. The r-curve concept in plane stress10.1016/0013-7944(73)90006-4 ↗
38. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
39. Kovacs · 1998
40. Elastic/plastic indentation hardness and indentation fracture toughness: the inclusion core model10.1007/BF01233154 ↗
41. Elastic contact versus indentation modeling of multi-layered materials10.1016/0020-7683(92)90004-D ↗
42. A comparison of elastic and plastic contact models for the prediction of thermal contact conductance
43. Crystal data for high-pressure phases of silicon10.1103/PhysRevB.34.4679 ↗
44. The two-layer structure of Zndtp tribofilms, Part I: AES, XPS and XANES analyses10.1016/S0301-679X(01)00029-9 ↗
45. Chemical characterization and nanomechanical properties of antiwear films fabricated from ZDDP on a near hypereutectic Al–Si alloy10.1007/s11249-004-3592-3 ↗
46. A multi-technique characterization of ZDDP antiwear films formed on Al (Si) alloy (A383) under various conditions10.1007/s11249-006-9125-5 ↗