Effect of contact load upon attrition-corrosion of human dental enamel
Source abstract
Abstract
Abstract Attrition-corrosion is a dental wear process containing both mechanical (attrition) and chemical (corrosion) effects. As contact load is a critical parameter for wear, its effects on enamel wear were investigated in vitro in the present study. Enamel cusp-on-flat configuration reciprocating wear tests were performed with acetic acid (at pH 3.2 and 5.5) and distilled water, at 37 °C for 2250 cycles. Contact loads considered were from 5 N to 13 N. Following testing, the enamel loss was measured and the wear scar and its subsurface were analysed using focused ion beam (FIB) sectioning, SEM and TEM to elucidate the dominant wear mechanisms. For the acidic lubricants, the increase in enamel loss with increasing load was insignificant. However, for the distilled water lubricant, there was a significant increase in the wear loss with load. The associated wear mechanisms were shaving of the softened layer with acidic lubricants and delamination with distilled water. The greater friction and wear associated with the delamination mechanism resulted in a significantly higher wear loss with distilled water than with acidic lubricants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental Erosion and Treatment · Dental materials and restorations · Temporomandibular Joint Disorders
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Dental erosion. Definition, classification and links10.1111/j.1600-0722.1996.tb00063.x ↗
2. Tooth brushing, tooth wear and dentine hypersensitivity — are they associated?10.1111/j.1875-595X.2005.tb00063.x ↗
3. Etiology of dental erosion–extrinsic factors10.1111/j.1600-0722.1996.tb00065.x ↗
4. Effect of acidity upon attrition–corrosion of human dental enamel10.1016/j.jmbbm.2014.12.016 ↗
5. A new tribometer for friction and wear studies of dental materials and hard tooth tissues10.1016/j.triboint.2006.09.006 ↗
6. Masticatory function-a review of the literature: (ii) Speed of movement of the mandible, rate of chewing and forces developed in chewing10.1111/j.1365-2842.1975.tb01535.x ↗
7. Maximal bite force and its association with signs and symptoms of craniomandibular disorders in young Finnish non-patients10.3109/00016359509005982 ↗
8. M.A. Masen, A. van't Spijker, C.M. Kreulen, An experimental investigation into dental wear: Tooth-tooth contact. in: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 224(6), 2010, p. 589–594.
9. Erosion and attrition of human enamel in vitro part II: Influence of time and loading10.1016/S0300-5712(02)00049-0 ↗
10. Wear of human enamel: a quantitative in vitro assessment10.1177/00220345980770120601 ↗
11. In vitro wear rates of materials under different loads and varying pH10.1067/mpr.2002.125609 ↗
12. Disinfection/sterilization of extracted teeth for dental student use10.1002/j.0022-0337.2001.65.11.tb03488.x ↗
13. Nanoindentation and storage of teeth10.1016/S0021-9290(02)00039-8 ↗
14. The development of an abrasion testing machine for dental materials10.1002/jbm.820090309 ↗
15. Some mechanical and physical properties of teeth
16. Erosion and attrition of human enamel in vitro part I: interaction effects10.1016/S0300-5712(02)00048-9 ↗
17. Focused ion beam milling and micromanipulation lift-out for site specific cross-section TEM specimen preparation
18. On the wear mechanism of human dental enamel10.1016/j.jmbbm.2010.01.006 ↗
19. In vitro study on the wear behaviour of human tooth enamel in citric acid solution10.1016/j.wear.2010.11.027 ↗
20. Biological organization of hydroxyapatite crystallites into a fibrous continuum toughens and controls anisotropy in human enamel10.1177/00220345010800010501 ↗
21. Ceramic-like wear behaviour of human dental enamel10.1016/j.jmbbm.2011.12.002 ↗
22. Abrasion of 6 dentifrices measured by vertical scanning interference microscopy10.1590/1679-775720130204 ↗
23. Ultrastructural studies of enamel crystallites10.1177/00220345790580023701 ↗
24. Erosive effects of different acids on bovine enamel: release of calcium and phosphate in vitro10.1016/j.archoralbio.2004.11.002 ↗
25. Effects of pH and concentration of citric, malic and lactic acids on enamel, in vitro10.1016/S0300-5712(99)00060-3 ↗
26. An investigation using atomic force microscopy nanoindentation of dental enamel demineralization as a function of undissociated acid concentration and differential buffer capacity10.1088/0031-9155/52/4/003 ↗
27. A new optical detection method to assess the erosion inhibition by in vitro salivary pellicle layer10.1016/j.jdent.2013.02.011 ↗
28. Occlusal force pattern during chewing and biting in dentitions restored with fixed bridges of cross-arch extension10.1111/j.1365-2842.1986.tb01556.x ↗
29. Tribology of dental materials: a review10.1088/0022-3727/41/11/113001 ↗
30. The development of quantitative methods using virtual models for the measurement of tooth wear10.1002/ca.21238 ↗
31. Mechanics of microwear traces in tooth enamel10.1016/j.actbio.2014.11.047 ↗
32. Wear mechanisms
33. Correlation of wear in vivo and six laboratory wear methods10.1016/j.dental.2012.04.006 ↗
34. Screening and prediction of erosive potential10.1159/000325917 ↗