Microstructure and fretting wear behaviour of gradient-structured Cu sheets prepared by plastic flow machining
Source abstract
Abstract
Plastic flow machining (PFM) is a novel severe plastic deformation (SPD) approach that produces gradient-structured surface sheets by a one-step forming method. This paper investigates the influence of constraint tool angles on the microstructure and mechanical properties of gradient-microstructured Cu sheets. The tribological behaviour and wear mechanisms of the sheets were studied in the fretting tests and compared with those of coarse-grained microstructural copper. The results indicated that significant grain sizes and hardness gradients were still formed along the sheet thickness direction by changing the constraint tool angle. As the constraint tool angle was increased, the thickness of the ultrafine grain layer (UGL), maximum microhardness, and residual compressive stress decreased. The fretting wear resistance of the sheet was enhanced, and the volume loss was significantly lower than that of the coarse-grained (CG) copper. The gradient-microstructured surface sheets prepared at the constraint tool angle of 90° exhibited lower coefficients of friction (CoF) and superior anti-wear performance, which were attributed to the gradient-structured surface that reduced adhesion, abrasion, and delamination wear, as well as to the prevention of crack initiation and development.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Mechanical stress and fatigue analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
2. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
3. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
4. Wu · 2021 · 53
5. Additional hardening in harmonic structured materials by strain partitioning and back stress10.1080/21663831.2018.1439115 ↗
6. Heterogeneous lamella structure unites ultrafine-grain strength and coarse-grain ductility10.1073/pnas.1517193112 ↗
7. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure10.1007/s10853-018-2322-4 ↗
8. Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling10.1016/j.actamat.2019.01.021 ↗
9. Mechanical and microstructural behavior of a heterogeneous austenitic stainless steel processed by Equal Channel Angular Sheet Extrusion (ECASE)10.1016/j.msea.2020.139779 ↗
10. Improving the strength and retaining the ductility of microstructural graded coarse-grained materials with low stacking fault energy10.1016/j.matdes.2018.08.057 ↗
11. Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient10.1016/j.scriptamat.2019.08.022 ↗
12. Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
13. Designing architectured materials10.1016/j.scriptamat.2012.04.033 ↗
14. Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification10.1016/j.surfcoat.2012.06.046 ↗
15. Influence of gradient structure volume fraction on the mechanical properties of pure copper10.1016/j.msea.2015.08.037 ↗
16. Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment10.1016/j.matdes.2016.05.015 ↗
17. Strength and ductility enhancement in the gradient structured twinning-induced plasticity steel by ultrasonic nanocrystalline surface modification10.1016/j.msea.2018.10.045 ↗
18. Mechanical properties and optimal grain size distribution profile of gradient grained nickel10.1016/j.actamat.2018.04.065 ↗
19. Improved back stress and synergetic strain hardening in coarse-grain/nanostructure laminates10.1016/j.msea.2018.04.107 ↗
20. Interface affected zone for optimal strength and ductility in heterogeneous laminate10.1016/j.mattod.2018.03.006 ↗
21. Mechanical properties of copper/bronze laminates: role of interfaces10.1016/j.actamat.2016.06.023 ↗
22. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure10.1007/s10853-018-2322-4 ↗
23. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
24. The plastic flow machining: a new SPD process for producing metal sheets with gradient structures10.1016/j.matchar.2018.02.013 ↗
25. Incremental equal channel angular pressing for grain refinement10.4028/www.scientific.net/MSF.674.19 ↗
26. Continuous high-pressure torsion10.1007/s10853-010-4381-z ↗
27. Heterogeneity of strain path, texture and microstructure evolution of AA6063-T6 processed by Equal Channel Angular Sheet Extrusion (ECASE)10.1016/j.jallcom.2018.07.216 ↗
28. Single-roll angular-rolling: a new continuous severe plasti deformation process formetal sheets10.1016/j.scriptamat.2017.11.043 ↗
29. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys10.1038/s41578-020-0212-2 ↗
30. Fretting wear10.1016/0043-1648(84)90008-5 ↗
31. Measurement and calculation of wear volume of ball-disk fretting wear parts
32. Microstructural evolution in copper subjected to severe plastic deformation: experiments and analysis10.1016/j.actamat.2006.07.008 ↗
33. Study of dynamic recrystallization behavior of T2 copper in hot working conditions by experiments and cellular automaton method10.1016/j.jallcom.2019.01.132 ↗
34. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
35. Correlation between residual stresses and the tribological behaviour of Inconel 625 coatings10.1016/j.surfcoat.2021.127288 ↗
36. Strength and ductility enhancement in the gradient structured twinning-induced plasticity steel by ultrasonic nanocrystalline surface modification10.1016/j.msea.2018.10.045 ↗
37. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
38. Residual stresses and fracture mechanics analysis of a crack in welds of high strength steels10.1016/j.engfracmech.2006.08.012 ↗
39. Friction and wear behaviours of self-lubricating peek composites for articulating pin joints10.1016/j.triboint.2019.04.025 ↗
40. Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2020.125497 ↗
41. The role of adhesion and delamination in the fretting wear of metallic materials10.1016/0043-1648(77)90026-6 ↗
42. An experimental investigation on fretting wear behavior of copper-magnesium alloy
43. Continuous processing of ultrafine grained Al by ECAP-Conform10.1016/j.msea.2004.04.021 ↗
44. On the correct selection of the channel die in ECAP processes10.1016/j.scriptamat.2003.10.007 ↗
45. A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper10.1016/j.actamat.2009.07.052 ↗
46. Accumulative roll bonding-A review10.3390/app9173627 ↗
47. Constrained groove pressing for sheet metal processing10.1016/j.pmatsci.2016.09.008 ↗
48. Mechanical modelling of the plastic flow machining process10.3390/ma11071218 ↗
49. Modeling of crystallographic texture in plastic flow machining10.1002/adem.201900661 ↗
50. Friction and wear of nanostructured metals created by large strain extrusion machining10.1016/j.wear.2006.11.040 ↗
51. Wear resistance and electroconductivity in copper processed by severe plastic deformation10.1016/j.wear.2013.06.001 ↗
52. Influence of processing parameters on wear resistance of nanostructured OFHC copper manufactured by large strain extrusion machining10.1016/j.wear.2009.07.009 ↗
53. Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification10.1016/j.surfcoat.2012.06.046 ↗
54. Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti-6Al-4V alloy10.1016/j.apsusc.2016.07.120 ↗
55. The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel10.1016/j.ijfatigue.2019.04.010 ↗
56. Evolution of wear damage in gross sliding fretting of a nitrided high-carbon high-chromium steel
57. Ultrafine grained Al 7075 alloy fabricated by cryogenic temperature large strain extrusion machining combined with aging treatment10.1016/j.msea.2019.138106 ↗
58. Fretting wear behaviour of ultrafine-grained copper produced by cryogenic temperature extrusion machining10.1080/02670836.2022.2152927 ↗
59. Ultra-high fatigue property and fracture mechanism of modified 20CrMoH steel by gas carburizing technology combined with shot peening treatment10.1016/j.ijfatigue.2022.107221 ↗
60. An experimental and analytical study of fatigue crack shape control by cold working10.1016/j.engfracmech.2007.03.033 ↗
61. Rolling contact fatigue properties of ultrasonic surface rolling treated 25CrNi2MoV steel under different lubricant viscosities10.1016/j.ijfatigue.2020.105970 ↗
62. Effect of ultrasonic surface rolling on microstructural evolution and fretting wear resistance of 20CrMoH steel under different quenching temperatures10.1016/j.matchemphys.2022.126362 ↗