journal article·2024-06Open access

Influence of cashew nut shell liquid on corrosion and tribocorrosion behavior of metallic alloys

C.A. Pino, J. Esguerra-Arce, V. Amigó, E. Klyatskina, C. Ayala-Garcia, O. Alvarez, A. Maranon, A. Porras, A. Bermudez-Castañeda, C. Hernandez

Wear· Volume 548-549

Abstract

[EN] Cashew Nut Shell Liquid (CNSL) has been explored in several applications within the sustainability principles and circular economy of agro-industrial product waste. To understand the anticorrosive and lubricant properties of CNSL solutions, a multi-faceted approach, incorporating electrochemical analyses, immersion test, tribological measurements, and tribochemical characterization was carried out for mild steel AISI 1012, stainless steel AISI 420 and Aluminium Alloy 6061. Electrochemical analyses reveal a positive impact of CNSL, inducing a shift in corrosion potential to more positive values and a decrease in corrosion current, indicating effective corrosion inhibition for stainless steel and aluminium alloy. In mild steel, CNSL exhibits a mixed-type inhibition with efficiency increasing in correlation with oil concentration. The lubricating properties of CNSL are evident according to the coefficients of friction (COF) obtained and the elastohydrodynamic lubrication regime observed during tribological tests. Tribochemical tests demonstrate a reduction in wear and an improvement in tribocorrosion behavior under sliding conditions. CNSL emerges as a promising tribocorrosion mitigator, demonstrating multifaceted benefits. The concentration-dependent effects highlight the need for optimization in specific applications, particularly for passive materials. CNSL not only inhibits corrosion through film formation but also provides effective lubrication, reducing friction, wear, and chemical-mechanical degradation. This research contributes valuable insights to corrosion science. It proposes practical applications for CNSL in diverse industrial contexts, showcasing its potential as an environmentally friendly and sustainable solution for tribocorrosion challenges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lubricants and Their Additives · Corrosion Behavior and Inhibition · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Sunflower seed hull extract as a novel green corrosion inhibitor for mild steel in HCl solution10.1016/j.molliq.2018.01.142 ↗
2. A novel green inhibitor for C-steel corrosion in 2.0mol·L−1 hydrochloric acid solution10.1016/j.cjche.2016.08.017 ↗
3. Influence of biomacromolecule DNA corrosion inhibitor on carbon steel10.1016/j.corsci.2017.06.004 ↗
4. A new corrosion inhibitor for protection of low carbon steel in HCl solution10.1016/j.corsci.2015.05.036 ↗
5. Investigation of ammonium (2,4-dimethylphenyl)-dithiocarbamate as a new, effective corrosion inhibitor for mild steel10.1016/j.corsci.2016.01.006 ↗
6. Evaluation of corrosion inhibition of mild steel in 0.1M HCl by 4-amino-3-hydroxynaphthalene-1-sulphonic acid10.1016/j.corsci.2014.04.017 ↗
7. Corrosion protection for mild steel by extract from the waste of lychee fruit in HCl solution: experimental and theoretical studies10.1016/j.jcis.2018.02.071 ↗
8. Neem extract as a green inhibitor for microbiologically influenced corrosion of carbon steel API 5LX in a hypersaline environments10.1016/j.molliq.2017.05.059 ↗
9. Natural honey and black radish juice as tin corrosion inhibitors10.1016/j.corsci.2008.01.013 ↗
10. Musa paradisica peel extract as green corrosion inhibitor for mild steel in HCl solution10.1016/j.corsci.2014.10.002 ↗
11. Influence of additives on the friction and wear reduction of oil-based drilling fluid10.1016/j.wear.2019.01.028 ↗
12. Siddaiah · 2021 · 1
13. Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in seawater10.1016/j.jestch.2020.07.004 ↗
14. Tribocorrosion
15. Tribocorrosion behaviour of AISI 304 stainless steel in 0.5M NaCl solution10.1016/j.matchemphys.2011.03.063 ↗
16. Cashew tree gum: a scientific and technological review10.22161/ijeab/2.2.14 ↗
17. Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil10.1016/j.jclepro.2014.10.027 ↗
18. Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions10.1016/j.triboint.2013.03.027 ↗
19. Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy10.1016/j.jclepro.2016.10.073 ↗
20. Cashew nutshell liquid (CNSL): from an agro-industrial waste to a sustainable alternative to petrochemical resources
21. Sustainable development of palm oil: synthesis and electrochemical performance of corrosion inhibitors10.33961/JECST.2017.8.2.133 ↗
22. CNSL: an environment friendly alternative for the modern coating industry10.1007/s11998-013-9521-3 ↗
23. New biobased epoxy materials from cardanol10.1002/ejlt.201300193 ↗
24. Synthesis and characterization of cashew nut shell liquid matrix compositions for composites applications
25. Cashew nut oil: opportunities and challenges in the context of sustainable industrial development10.1590/S0100-40422009000300017 ↗
26. Eco-friendly corrosion inhibitors based on Cashew nut shell liquid (CNSL) for acidizing fluids10.1016/j.molliq.2019.02.083 ↗
27. Materials of construction for food processing equipment and services: requirements, strengths and weaknesses
28. Seguridad en los objetos metálicos en contacto con alimentos. Guía de buenas prácticas de fabricación y compra.,” Actualidad Aidimme. Accessed: January. 9, 2024. [Online]. Available: https://actualidad.aidimme.es/2017/11/20/aidimme-estudia-la-seguridad-los-metales-presentes-utensilios-contacto-alimentos/, https://actualidad.aidimme.es/2017/11/20/aidimme-estudia-la-seguridad-los-metales-presentes-utensilios-contacto-alimentos/.
29. Popov · 2015
30. Kaesche · 2003
31. Investigation of the adsorption characteristics of some selected sulphonamide derivatives as corrosion inhibitors at mild steel/hydrochloric acid interface: experimental, quantum chemical and QSAR studies10.1016/j.molliq.2015.12.095 ↗
32. Extraction, characterization and application of cashew nut shell liquid from cashew nut shells10.9734/CSJI/2019/v28i330143 ↗
33. Bio oil from pyrolysis of cashew nut shell-characterisation and related properties10.1016/j.biombioe.2003.12.001 ↗
34. Comparison between physico-chemical properties of the technical Cashew Nut Shell Liquid (CNSL) and those natural extracted from solvent and pressing10.1590/S0104-14282011005000028 ↗
35. The effect of organic compounds on the electrochemical behaviour of steel in acidic media. A review10.1016/S1452-3981(23)15542-8 ↗
36. Effect of extraction methods on characteristic and composition of Indonesian cashew nut shell liquid10.1016/j.indcrop.2011.07.007 ↗
37. Synthesis and corrosion inhibition behavior of imidazoline derivatives based on vegetable oil10.1016/j.corsci.2012.02.011 ↗
38. Green and sustainable local biomaterials for oilfield chemicals: griffonia simplicifolia extract as steel corrosion inhibitor in hydrochloric acid10.1016/j.susmat.2016.12.001 ↗
39. Investigation of adsorption characteristics of N,N′-[(methylimino)dimethylidyne]di-2,4-xylidine as corrosion inhibitor at mild steel/sulphuric acid interface10.1016/j.jtice.2011.10.012 ↗
40. “Fundamentals of corrosion kinetics,” in active protective coatings: new-generation coatings for metals10.1007/978-94-017-7540-3_2 ↗
41. Effect of surface passivation on corrosion resistance and antibacterial properties of Cu-bearing 316L stainless steel10.1016/j.apsusc.2016.06.036 ↗
42. Interpretation of cyclic potentiodynamic polarization test results for study of corrosion behavior of metals: a review10.1134/S207020511805026X ↗
43. Study of stainless steels corrosion in a strong acid mixture. Part 1: cyclic potentiodynamic polarization curves examined by means of an analytical method10.1016/j.corsci.2017.10.012 ↗
44. Corrosion inhibitors – principles, mechanisms and applications
45. A theoretical approach to understand the inhibition mechanism of steel corrosion with two aminobenzonitrile inhibitors10.1039/C5RA15173B ↗
46. Thermodynamics of corrosion: pourbaix diagrams
47. Revised pourbaix diagrams for chromium at 25–300 °C10.1016/S0010-938X(97)89244-X ↗
48. Cyclic polarization analysis of corrosion behavior of ceramic coating on 6061 Al/SiCp composite for marine applications10.1134/S2070205116050117 ↗
49. Comparison of corrosion behavior of Al-Mn and Al-Mg alloys in chloride aqueous solution10.1002/maco.201408211 ↗
50. Understanding pitting corrosion behavior of AZ91 alloy and its MAO coating in 3.5% NaCl solution by cyclic potentiodynamic polarization10.1016/j.jma.2020.12.005 ↗
51. New findings on intergranular corrosion mechanism of stabilized stainless steels10.1016/j.electacta.2010.08.042 ↗
52. Determination of susceptibility to intergranular corrosion and electrochemical reactivation behaviour of AISI 316L type stainless steel10.1016/j.corsci.2006.01.003 ↗
53. Effects of the corrosion pitting parameters on the mechanical properties of corroded steel10.1016/j.conbuildmat.2020.121941 ↗
54. A multi-degradation test rig for studying the synergy effects of tribocorrosion interacting with 4-point static and cyclic bending10.1016/j.wear.2011.07.002 ↗
55. Munoz · 2020
56. Influence of asperity contact conditions on the failure of sliding elastohydrodynamic contacts10.1016/0043-1648(77)90187-9 ↗
57. Friction and wear phenomena of vegetable oil–based lubricants with additives at severe sliding wear conditions10.1080/10402004.2017.1290858 ↗
58. Assessing the corrosion–wear behaviours of Hastelloy C276 alloy in seawater10.1002/ls.1301 ↗
59. Modelling the tribo-corrosion interaction in aqueous sliding conditions10.1016/S0301-679X(02)00058-0 ↗
60. Effect of graphite on tribological and mechanical properties of AA7075 composites10.1080/10402004.2014.947663 ↗
61. Improve the tribo-corrosion behavior of oil-in-water emulsion-based drilling fluids by new derivatives of fatty acid-based green inhibitors10.1016/j.triboint.2022.107723 ↗
62. The importance of surface oxide films in the friction and lubrication of metals. Part I.—the dry friction of surfaces freshly exposed to air10.1039/TF9504600093 ↗
63. Frictional response of fatty acids on steel10.1016/j.jcis.2009.01.046 ↗
64. Contact temperatures and their influence on wear during pin-on-disk tribotesting10.1016/j.triboint.2013.10.022 ↗
65. Adsorption mechanisms for fatty acids on DLC and steel studied by AFM and tribological experiments10.1016/j.apsusc.2013.06.131 ↗
66. Adsorption, chemisorption, and catalysis10.2478/s11696-014-0624-9 ↗
67. The lubrication effect of different vegetable oil-based greases on steel-steel tribo-pair
68. Experimental investigation of tribo-corrosive nature of biodiesel and its effect on lubricating system10.1007/s40735-020-00416-0 ↗