journal article·2017-09

Wear evaluation of three-dimensionally woven materials for use in a novel cartilage replacement

Michael Giordano, Steven Schmid, Mohammadreza Arjmandi, Maziar Ramezani

Wear· Volume 386-387
Publisher page

Abstract

Abstract The wear behavior of three-dimensional woven materials is poorly understood and is of great concern for three-dimensional weaves intended for orthopedic use. This study focuses on the fiber material and weave pattern used at the bearing surface during accelerated life testing. Samples of polyester and ultra-high molecular weight polyethylene in orthogonal and satin weave patterns were subjected to pin-on-disk testing in a Deionized water bath while the mating surface was made from cobalt-chromium alloy. All samples showed steady wear except ones with a satin weave of ultra-high molecular weight polyethylene at the bearing surface. These fabrics exhibited wear rates at three million cycles comparable to bulk non-crosslinked polyethylene found in the literature. These results indicate that with a proper pairing of weave pattern and fiber material, three-dimensional woven materials have the potential to be used in orthopedic articulating surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Orthopaedic implants and arthroplasty · Total Knee Arthroplasty Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A biomimetic three-dimensional woven composite scaffold for functional tissue engineering of cartilage10.1038/nmat1822 ↗
2. Multifunctional hybrid three‐dimensionally woven scaffolds for cartilage tissue engineering10.1002/mabi.201000124 ↗
3. Composite three‐dimensional woven scaffolds with interpenetrating network hydrogels to create functional synthetic articular cartilage10.1002/adfm.201300483 ↗
4. Textile cell-free scaffolds for in situ tissue engineering applications
5. Cherif · 2011
6. Some recent advances in the fabrication and design of three-dimensional textile preforms: a review10.1016/S0266-3538(99)00093-7 ↗
7. A three-dimensional micromechanical analysis of woven-fabric composites: I. Geometric analysis10.1016/S0266-3538(96)00092-9 ↗
8. Goswami · 1977
9. Jones · 2010
10. Comparison of cobalt chromium, ceramic and pyrocarbon hemiprostheses in a rabbit model: ceramic leads to more cartilage damage than cobalt chromium10.1002/jbm.b.30961 ↗
11. The effect of contact stress on cartilage friction, deformation and wear10.1177/2041303310392626 ↗
12. Normal human locomotion, Part 1: basic concepts and terminology10.1097/00008526-199701000-00004 ↗
13. Friction characteristics of a potential articular cartilage biomaterial10.1016/S0043-1648(03)00113-3 ↗
14. The contact area and pressure distribution pattern of the knee: a study of normal and osteoarthrotic knee joints10.3109/17453678008990887 ↗
15. Normal hip joint contact pressure distribution in single-leg standing—effect of gender and anatomic parameters10.1016/S0021-9290(01)00041-0 ↗
16. Assessment of the radii of the medial and lateral femoral condyles in varus and valgus knees with osteoarthritis10.2106/JBJS.H.01566 ↗
17. Analysis of fluid film lubrication in artificial hip joint replacements with surfaces of high elastic modulus10.1243/0954411971534359 ↗
18. The correlation between femoral condyle radii and subject height10.1002/ca.20787 ↗
19. A. International, ASTM F 2025-06. Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment, West Conshohocken, PA, USA, 2009.
20. The effect of transfer film and surface roughness on the wear of lubricated ultra-high molecular weight polyethylene10.1016/0267-6605(93)90016-Z ↗
21. The wear behavior of ultrahigh molecular weight polyethylene10.1016/0043-1648(76)90034-X ↗
22. The effect of grinding direction on the nature of the transfer film formed during the sliding wear of ultrahigh molecular weight polyethylene against stainless steel10.1016/0043-1648(91)90259-W ↗
23. The development of transfer layers and their role in polymer tribology10.1016/S0043-1648(00)00469-5 ↗
24. Material transfer in polymer-polymer sliding10.1016/0043-1648(78)90119-9 ↗
25. Large-scale tests on friction and wear of engineering polymers for material selection in highly loaded sliding systems10.1016/j.matdes.2004.12.021 ↗
26. Tribological investigation of the effects of particle size, loading and crystallinity on poly (ethylene) terephthalate nanocomposites10.1016/j.wear.2007.05.009 ↗
27. Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly (ethylene) terephthalate composites10.1016/j.wear.2004.09.077 ↗
28. Effect of the degree of crystallinity on the friction and wear of poly (ethylene terephthalate) under water lubrication10.1016/0043-1648(86)90075-X ↗
29. Low wear rate of UHMWPE against zirconia ceramic (Y‐PSZ) in comparison to alumina ceramic and SUS 316L alloy10.1002/jbm.820250703 ↗
30. Effect of fabric geometry on friction and wear of glass-fibre-reinforced composites10.1016/0043-1648(91)90139-L ↗
31. Influence of weave of carbon fabric on low amplitude oscillating wear performance of polyetherimide composites10.1016/j.wear.2006.08.005 ↗
32. In vivo wear properties of ultra-high molecular weight polyethylene used in a total knee prosthesis10.1016/0043-1648(79)90175-3 ↗
33. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints: II: a microscopical study of the surfaces of Charnley polyethylene acetabular sockets10.1016/0043-1648(85)90049-3 ↗
34. Atkinson · Wear · 1985 · 104 · 22510.1016/0043-1648(85)90050-X ↗
35. Surface damage to cobalt-chrome femoral head prostheses10.1302/0301-620X.76B1.8300686 ↗
36. The influence of bone and bone cement debris on counterface roughness in sliding wear tests of ultra-high molecular weight polyethylene on stainless steel10.1243/PIME_PROC_1990_204_230_02 ↗
37. The surface topography of retrieved femoral heads
38. McKellop · 1984 · 51
39. Wear of ion-implanted pure titanium against UHMWPE10.1016/0142-9612(89)90020-3 ↗
40. Wear and conformity in total knee replacement10.1016/0043-1648(76)90003-X ↗
41. The causes of femoral head roughening in explanted Charnley hip prostheses10.1243/EMED_JOUR_1987_016_035_02 ↗
42. Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates10.1002/jbm.820120611 ↗
43. Effect of water and serum absorption on wear of unirradiated and crosslinked UHMWPE orthopedic bearing materials10.1080/05698190600678663 ↗
44. Factors affecting the wear of irradiated UHMWPE10.1080/10402000108982451 ↗
45. Uni-and multidirectional wear resistance of different crosslinking degrees in UHMWPE for artificial joints10.4236/jbise.2011.44035 ↗
46. A new pin-on-disk wear testing method for simulating wear of polyethylene on cobalt-chrome alloy in total hip arthroplasty10.1054/arth.2001.23718 ↗
47. α-Tocopherol-doped irradiated UHMWPE for high fatigue resistance and low wear10.1016/j.biomaterials.2003.12.048 ↗
48. Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE)10.1016/S0142-9612(99)00039-3 ↗
49. Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene10.1097/01.blo.0000093004.90435.d1 ↗
50. Discrete woven structure model: yarn-on-yarn friction10.1016/j.crme.2007.02.006 ↗
51. Consistent 3D geometrical model of fabric elementary cell. application to a meshing preprocessor for 3D finite element analysis10.1016/j.finel.2005.05.001 ↗
52. Use of 3D angle-interlock woven fabric for seamless female body armor: Part 1: ballistic evaluation10.1177/0040517510363187 ↗