journal article·2008-11

Mechanisms of dissipation in frictional joints—Influence of sharp contact edges and plastic deformation

Henrik Wentzel, Mårten Olsson

Wear· Volume 265· Issue 11-12
Publisher page

Abstract

In the present study frictional and plastic dissipation in joints are investigated by means of the finite element method. The Coulomb friction model is used in simulations and the results are compared to experimental measurements. Some of the contacts considered contain numerous internal sharp edges that are localized inside the overall contact region. For joints with sharp contact edges an elastic material model with Coulomb friction is inappropriate because of the sliding-over-edge that occurs in such joints. Here, the sliding-over-edge phenomenon is studied with an elastic-plastic material model in some detail. The phenomenon involves very high plastic strains locally, material build-up in front of the edge and large plastic dissipation. A summation technique for the total dissipation in joints is presented, where each local sliding-over-edge contribution is taken into account. The results are compared to experiments. It is shown that plastic deformation is an important contributing factor to the total dissipation in joints with highly non-conformal surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Mechanical stress and fatigue analysis · Brake Systems and Friction Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. E.E. Ungar, Energy Dissipation at Structural Joints; Mechanisms and Magnitudes, Bolt Technical Documentary Report no. FDL-TDR-64-98, Air Force Flight Dynamics Lab, 1964.10.21236/AD0607257 ↗
2. Study of dry friction under small displacements and near-zero sliding velocity10.1016/S0043-1648(97)00027-6 ↗
3. Goodman · 1959 · 35
4. Effect of pressure distribution on energy dissipation in a mechanical lap joint10.2514/1.10139 ↗
5. H. Wentzel, M. Olsson, Influence from contact pressure distribution on energy dissipation in bolted joints, Welding & Joining & Fastening & Friction Stir Welding, ISBN 978-0-7680-1769-4 (2006) SAE paper no. 2006-010778.
6. Damping in structural joints subjected to tangential loads10.1243/PIME_PROC_1991_205_099_02 ↗
7. Bowden · 1950
8. Cyclic micro-slip under unlubricated conditions10.1016/0301-679X(94)00001-7 ↗
9. H. Wentzel, M. Olsson, M. Öberg, Metallic Inserts as a Tool to Alter the Structural Damping of Joined Structures, Report no. 430, KTH-Department of Solid Mechanics, 2007.
10. Abaqus, Inc., Abaqus Theory Manual, V6.6., Abaqus Inc., 2006.
11. Eigenspannungen und Verfestingung beim Messing
12. On the numerics and correlation of scratch testing10.2140/jomms.2007.2.573 ↗