journal article·2005-07

Evaluation of coating-based lubricants for cold forging using the localised rod-drawing test

Liqun Ruan, Hiroyuki Saiki, Yasuo Marumo, Yasuhiro Imamura

Wear· Volume 259· Issue 7-12
Publisher page

Abstract

A tribo-test method that incorporates major interacting variables such as surface expansion, interface temperature, sliding velocity, pressure, etc. is introduced to evaluate the performance of lubricants in cold forging. To induce different deformation patterns, dies of different surface profiles are employed under localised rod-drawing setup. The tools are designed based on the maximum level of surface expansion they can induce. The tester includes facilities for heating dies and the workpiece to vary interface temperatures. The tribo-test results indicated that the lubricity of the coating-based lubricants is influenced by the interface temperature, the surface expansion and the multistage operations. The coefficient of friction decreased and then increased with the increasing interface temperature. In the case of large surface expansion, the lubricity deteriorates at a shorter sliding distance. The results of the two-stage tribo-tests revealed the effect of the deterioration and the thinning of the coatings on subsequent forging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Adhesion strength of phosphate coatings in cold forming
2. Coefficient of friction in cold extrusion
3. On the determination of friction in the cold forging of coated steel workpieces
4. General characterization of phosphate/stearate coatings: seizure resistance and conductivity measurement
5. A new friction and lubrication test for cold forging10.1016/S0007-8506(07)62311-7 ↗
6. A friction and lubrication test for cold forging
7. Two new methods for testing lubricants for cold forging10.1016/0378-3804(86)90065-3 ↗
8. L. Ruan, Y. Imamura, Y. Marumo, H. Saiki, Research Report of Faculty of Engineering, vol. 50(1), Kumamoto University, 2001, p. 1.
9. Influence of die geometry on the workability of conversion coatings combined with soap lubricant in cold forging of steels10.1016/S0924-0136(96)02629-5 ↗
10. Characterization of adhesive strength of phosphate coatings in cold metal forming10.1115/1.2833867 ↗