journal article·2008-09

UV-enhanced bioactivity and cell response of micro-arc oxidized titania coatings

Yong Han, Donghui Chen, Jifeng Sun, Yumei Zhang, Kewei Xu

Acta Biomaterialia· Volume 4· Issue 5
Publisher page

Abstract

Using ultraviolet (UV) irradiation of micro-arc oxidized (MAO) titania coating in distilled water for 0.5 and 2h, we have achieved an enhanced bioactivity and cell response to titania surface. The MAO coating appears porous and predominantly consists of nanocrystallized anatase TiO(2). Compared with the MAO coating, the UV-irradiated coatings do not exhibit any obvious change in surface roughness, morphology, grain size and phase component; however, they have more abundant basic Ti-OH groups and become more hydrophilic because the water contact angle decreases significantly from 17.9+/-0.8 degrees to 0 degrees . In simulated body fluid (SBF), bonelike apatite-forming ability is significantly stronger on the UV-irradiated coatings than the MAO coating. SaOS-2 human osteoblast-like cell attachment, proliferation and alkaline phosphatase of the cell are greater on the UV-irradiated coatings relative to the MAO coating. UV irradiation of titania results in the conversion of Ti(4+) to Ti(3+) and the generation of oxygen vacancies, which could react with the absorbed water to form basic Ti-OH groups. The enhanced bioactivity and cell response of the UV-irradiated coatings are proven to result from abundant Ti-OH groups on the coating surfaces. After storing the UV-irradiated coatings in the dark for two weeks, the basic Ti-OH groups on the coatings slightly decrease in amount and can induce apatite formation after a short period of SBF immersion, and show relative long-term stability.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Marine Biology and Environmental Chemistry · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. The influences of plasma spraying parameters on the characteristics of hydroxyapatite coatings: a quantitative study10.1007/BF00120267 ↗
2. Structural characterization of pulsed laser-deposited hydroxyapatite coating on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
3. Ion-beam-assisted deposition (IBAD) of hydroxyapatite coating layer on Ti-based metal substrate10.1016/S0142-9612(99)00186-6 ↗
4. Characterization and stability of hydroxyapatite coatings prepared by electrodeposition and alkaline-treatment process10.1002/1097-4636(200101)54:1<96::AID-JBM11>3.0.CO;2-U ↗
5. Evaluation of nano-structured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis10.1002/jbm.10097 ↗
6. Amount of hydroxyl radical on calcium-ion-implanted titanium and point of zero charge of constituent oxide of the surface-modified layer10.1023/A:1008847014938 ↗
7. Modification of titanium by ion implantation of calcium and/or phosphorus10.1016/S0257-8972(98)00717-8 ↗
8. Ion beam sensitizing of titanium surfaces to hydroxyapatite formation10.1016/S0257-8972(00)00593-4 ↗
9. Preparation and analysis of macroporous TiO2 coatings on Ti surface for bone-tissue implants10.1002/1097-4636(20011215)57:4<588::AID-JBM1206>3.0.CO;2-Y ↗
10. Enhanced functions of osteoblasts on nanophase ceramics10.1016/S0142-9612(00)00075-2 ↗
11. Alkali- and heat-treated porous titanium for orthopedic implants10.1002/1097-4636(200102)54:2<198::AID-JBM6>3.0.CO;2-7 ↗
12. Optimizing the biomechanical compatibility of orthopedic screws for bone fracture fixation10.1016/S1350-4533(02)00027-9 ↗
13. Formation and characterization of anodic titanium oxide coatings containing Ca and P10.1002/jbm.820290110 ↗
14. Characterization of thin hydroxyapatite layers formed on anodic titanium oxide coatings containing Ca and P by hydrothermal treatment10.1002/jbm.820290907 ↗
15. Hydrothermal deposition of hydroxyapatite on anodic titanium oxide coatings containing Ca and P10.1023/A:1004739108534 ↗
16. Structure and in vitro bioactivity of titania-based coatings by micro-arc oxidation10.1016/S0257-8972(03)00016-1 ↗
17. Biomimetic apatite coatings on micro-arc oxidized titania10.1016/j.biomaterials.2003.09.103 ↗
18. Preparation and apatite layer formation by plasma electrolytic oxidation on titanium for biomedical application10.1016/j.matlet.2004.09.045 ↗
19. Hydroxyapatite coatings prepared by micro-arc oxidation in Ca- and P-containing electrolyte10.1016/j.surfcoat.2006.07.052 ↗
20. One-step approach for nano-crystalline hydroxyapatite coating on titanium via micro-arc oxidation10.1016/j.elecom.2007.04.023 ↗
21. Effects of solution pH and electrical parameters on hydroxyapatite coatings deposited by a plasma-assisted electrophoresis technique10.1002/1097-4636(20011215)57:4<612::AID-JBM1208>3.0.CO;2-H ↗
22. Anodic oxide coatings containing Ca and P of titanium biomaterial10.1016/S0142-9612(00)00394-X ↗
23. Characteristic and in vitro bioactivity of a microarc-oxidized TiO2-based coating after chemical treatment10.1016/j.actbio.2007.03.001 ↗
24. Preparation of bioactive titanium metal via anodic oxidation treatment10.1016/S0142-9612(03)00626-4 ↗
25. Surface modifications and cell–materials interactions with anodized Ti10.1016/j.actbio.2006.12.003 ↗
26. Synthesis of nanocrystalline titania coatings by micro-arc oxidation10.1016/S0167-577X(02)00606-7 ↗
27. Photo-excited formation of bone apatite-like coating on micro-arc oxidized titanium10.1002/jbm.a.30177 ↗
28. Porous nanocrystalline titania coatings by plasma electrolytic oxidation10.1016/S0257-8972(02)00036-1 ↗
29. Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages10.1016/j.surfcoat.2006.07.137 ↗
30. Surface modification of titanium implant by microarc oxidation and hydrothermal synthesis10.1002/jbm.b.30009 ↗
31. Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior10.1002/jbm.a.20063 ↗
32. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation10.1016/j.biomaterials.2003.09.048 ↗
33. In vitro and in vivo behaviour of Ca- and P-enriched anodized titanium10.1016/S0142-9612(99)00060-5 ↗
34. Anodic oxidation and hydrothermal treatment of titanium results in a surface that caused increased attachment and altered cytoskeletal morphology of rat bone marrow stromal cells in vitro10.1002/1097-4636(20000905)51:3<398::AID-JBM14>3.0.CO;2-# ↗
35. Effects of topography and composition of titanium surface oxides on osteoblast responses10.1016/j.biomaterials.2003.11.011 ↗
36. Light-induced amphiphilic surfaces10.1038/41233 ↗
37. Photogeneration of highly amphiphilic TiO2 surfaces10.1002/(SICI)1521-4095(199801)10:2<135::AID-ADMA135>3.0.CO;2-M ↗
38. Photocatalytic activity and photoinduced hydrophilicity of titanium dioxide coated glass10.1016/S0040-6090(99)00205-9 ↗
39. Studies of surface wettability conversion on TiO2 single-crystal surfaces10.1021/jp983386x ↗
40. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
41. Surface modification of titanium with phosphonic acid to improve bone bonding: characterization by XPS and ToF-SIMS10.1021/la010908i ↗
42. Influence of a cellulosic ether carrier on the structure of biphasic calcium phosphate ceramic particles in an injectable composite material10.1016/S0142-9612(98)00222-1 ↗
43. X-ray photoelectron spectroscopy (XPS) studies of clean and hydrated TiO2 (rutile) surfaces10.1016/0009-2614(79)87231-0 ↗
44. Oxygen 1s X-ray absorption edges of transition-metal oxides10.1103/PhysRevB.40.5715 ↗
45. Apatite formation on TiO2 in simulated body fluid10.1016/S0022-0248(01)01782-1 ↗
46. Surface spectroscopic characterization of titanium implant materials10.1016/0169-4332(90)90100-E ↗
47. Immunolocalization of fibronectin and vitronectin receptors in human gingival fibroblasts spreading on titanium surfaces10.1111/j.1600-0765.1994.tb01103.x ↗
48. Effects of roughness, fibronectin and vitronectin on attachment, spreading and proliferation of human osteoblast-like cells (Saos-2) on titanium surface10.1007/s002239900640 ↗
49. Effect of surface roughness on proliferation and alkaline phosphatase expression of rat calvarial cells cultured on polystyrene10.1016/S8756-3282(99)00192-1 ↗
50. Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition10.1016/S0142-9612(98)00144-6 ↗
51. Relative importance of surface wettability and charged functional groups on NIH3T3 fibroblast attachment, spreading and cytoskeletal organization10.1002/(SICI)1097-4636(19980905)41:3<422::AID-JBM12>3.0.CO;2-K ↗
52. Behavior of human osteoblastic cells on stoichiometric hydroxyapatite and type A carbonate apatite: role of surface energy10.1002/(SICI)1097-4636(20000605)50:3<353::AID-JBM9>3.0.CO;2-C ↗
53. Role of material surfaces in regulating bone and cartilage cell response10.1016/0142-9612(96)85758-9 ↗
54. Increased cell response to zirconia ceramics by surface modification10.1063/1.2385208 ↗