journal article·2017-10

Carbon nanotube, graphene and boron nitride nanotube reinforced bioactive ceramics for bone repair

Chengde Gao, Pei Feng, Shuping Peng, Cijun Shuai

Acta Biomaterialia· Volume 61
Publisher page

Abstract

The high brittleness and low strength of bioactive ceramics have severely restricted their application in bone repair despite the fact that they have been regarded as one of the most promising biomaterials. In the last few years, low-dimensional nanomaterials (LDNs), including carbon nanotubes, graphene and boron nitride nanotubes, have gained increasing attention owing to their favorable biocompatibility, large surface specific area and super mechanical properties. These qualities make LDNs potential nanofillers in reinforcing bioactive ceramics. In this review, the types, characteristics and applications of the commonly used LDNs in ceramic composites are summarized. In addition, the fabrication methods for LDNs/ceramic composites, such as hot pressing, spark plasma sintering and selective laser sintering, are systematically reviewed and compared. Emphases are placed on how to obtain the uniform dispersion of LDNs in a ceramic matrix and maintain the structural stability of LDNs during the high-temperature fabrication process of ceramics. The reinforcing mechanisms of LDNs in ceramic composites are then discussed in-depth. The in vitro and in vivo studies of LDNs/ceramic in bone repair are also summarized and discussed. Finally, new developments and potential applications of LDNs/ceramic composites are further discussed with reference to experimental and theoretical studies. Statement of significance Despite bioactive ceramics having been regarded as promising biomaterials, their high brittleness and low strength severely restrict their application in bone scaffolds. In recent years, low-dimensional nanomaterials (LDNs), including carbon nanotubes, graphene and boron nitride nanotubes, have shown great potential in reinforcing bioactive ceramics owing to their unique structures and properties. However, so far it has been difficult to maintain the structural stability of LDNs during fabrication of LDNs/ceramic composites, due to the lengthy, high-temperature process involved. This review presents a comprehensive overview of the developments and applications of LDNs in bioactive ceramics. The newly-developed fabrication methods for LDNs/ceramic composites, the reinforcing mechanisms and the in vitro and in vivo performance of LDNs are also summarized and discussed in detail.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Graphene and Nanomaterials Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Economic crisis and counter-reform of universal health care systems: Spanish case10.1590/S0034-8910.2015049005469 ↗
2. Cobb · 2014
3. marketsandmarkets.com, Biomaterials Market by Type of Materials (Metallic, Ceramic, Polymers, Natural) & Application (Cardiovascular, Orthopedic, Dental, Plastic Surgery, Wound Healing, Neurology, Tissue Engineering, Ophthalmology) - Global Forecast to 2021, 2016.
4. GS/DBM/PLA porous composite biomaterial for the treatment of infective femoral condyle defect in rats10.3892/etm.2016.3219 ↗
5. Bone graft harvest site options in orthopaedic trauma: a prospective in vivo quantification study10.1016/j.injury.2011.08.029 ↗
6. The free vascularized fibular graft for bridging large skeletal defects of the upper extremity10.1002/micr.20862 ↗
7. Three dimensional bioprinting speeds up smart regenerative medicine10.1093/nsr/nww037 ↗
8. A review on biomaterials: scope, applications & human anatomy significance
9. Ramakrishna · 2016
10. Biodegradable materials for bone repairs: a review10.1016/j.jmst.2013.03.002 ↗
11. Biodegradable Mg and Mg based alloys for biomedical implants10.1179/1743284713Y.0000000500 ↗
12. Biodegradable orthopedic magnesium-calcium (MgCa) alloys
13. Medical applications of organic–inorganic hybrid materials within the field of silica-based bioceramics10.1039/C0CS00025F ↗
14. Nanophase hydroxyapatite as a biomaterial in advanced hard tissue engineering: a review10.1089/ten.teb.2012.0624 ↗
15. Revolutionizing orthopaedic biomaterials: the potential of biodegradable and bioresorbable magnesium-based materials for functional tissue engineering10.1016/j.jbiomech.2013.12.003 ↗
16. A metallic biomaterials: introduction
17. History of regenerative medicine
18. In vitro evaluation of biomimetic nanocomposite scaffold using endometrial stem cell derived osteoblast-like cells10.1016/j.tice.2013.05.002 ↗
19. Engineering bone tissue substitutes from human induced pluripotent stem cells10.1073/pnas.1301190110 ↗
20. Bone regeneration based on tissue engineering conceptions—a 21st century perspective10.4248/BR201303002 ↗
21. Immobilization and application of electrospun nanofiber scaffold-based growth factor in bone tissue engineering10.2174/1381612821666150302152704 ↗
22. Phage nanofibers induce vascularized osteogenesis in 3D printed bone scaffolds10.1002/adma.201400154 ↗
23. Acceleration of bone-defect repair by using A-W MGC loaded with BMP2 and triple point-mutant HIF1α-expressing BMSCs10.1186/s13018-015-0219-3 ↗
24. Current progress in bioactive ceramic scaffolds for bone repair and regeneration10.3390/ijms15034714 ↗
25. Biomimetic porous scaffolds for bone tissue engineering10.1016/j.mser.2014.04.001 ↗
26. Responsive and in situ-forming chitosan scaffolds for bone tissue engineering applications: an overview of the last decade10.1039/B916259N ↗
27. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
28. Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration10.1016/j.biomaterials.2006.02.039 ↗
29. Synthesis, properties and hydration characteristics of novel nano-size mineral trioxide and tetracalcium phosphate for dental applications10.13005/ojc/320516 ↗
30. Hybrid macroporous gelatin/bioactive-glass/nanosilver scaffolds with controlled degradation behavior and antimicrobial activity for bone tissue engineering10.1166/jbn.2014.1783 ↗
31. Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior10.1088/1758-5090/7/3/035010 ↗
32. Periodontal ligament cells cultured on the tricalcium phosphate/chitosan scaffolds in vivo and in vitro10.1007/s11595-014-0888-5 ↗
33. Bioactive glass: chronology, characterization, and genetic control of tissue regeneration
34. Ceramic and non-ceramic hydroxyapatite as a bone graft material: a brief review10.1007/s11845-014-1199-8 ↗
35. Fabrication and characterization of bioactive calcium silicate microspheres for drug delivery10.1016/j.ceramint.2013.09.106 ↗
36. Calcium silicate/calcium phosphate biphasic cements for vital pulp therapy: chemical-physical properties and human pulp cells response10.1007/s00784-015-1443-2 ↗
37. The effective role of akermanite on the apatite-forming ability of gelatin scaffold as a bone graft substitute10.1016/j.ceramint.2016.08.106 ↗
38. Microstructure, mechanical properties and in vitro bioactivity of akermanite scaffolds fabricated by laser sintering10.3233/BME-141017 ↗
39. Bioactivity investigations with calcia magnesia based composites
40. Nano forsterite biocomposites for medical applications: mechanical properties and bioactivity10.1002/jbm.b.33396 ↗
41. Incorporation of B2O3 in CaO-SiO2-P2O5 bioactive glass system for improving strength of low-temperature co-fired porous glass ceramics10.1016/j.jnoncrysol.2012.02.005 ↗
42. Biocompatible alginate/nano bioactive glass ceramic composite scaffolds for periodontal tissue regeneration10.1016/j.carbpol.2011.07.058 ↗
43. Nanostructure effects on the bioactivity of forsterite bioceramic10.1016/j.matlet.2010.11.014 ↗
44. Enstatite based ceramics for machinable prosthesis applications10.1016/S0955-2219(98)00117-4 ↗
45. Clinoenstatite coatings have high bonding strength, bioactive ion release, and osteoimmunomodulatory effects that enhance in vivo osseointegration10.1016/j.biomaterials.2015.08.027 ↗
46. Degradation, bioactivity, and cytocompatibility of diopside, akermanite, and bredigite ceramics10.1002/jbm.b.30779 ↗
47. Degradability, cytocompatibility, and osteogenesis of porous scaffolds of nanobredigite and PCL–PEG–PCL composite10.2147/IJN.S97063 ↗
48. Reinforcement of calcium phosphate cement by incorporating with high-strength β-tricalcium phosphate aggregates10.1002/jbm.b.31956 ↗
49. Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering10.1016/j.biomaterials.2003.12.023 ↗
50. Repair of canine mandibular bone defects with bone marrow stromal cells and porous beta-tricalcium phosphate10.1016/j.biomaterials.2006.10.015 ↗
51. Mechanical properties of calcium phosphate scaffolds fabricated by robocasting10.1002/jbm.a.31587 ↗
52. Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration10.1016/j.actbio.2010.05.024 ↗
53. A novel bioactive porous bredigite (Ca7MgSi4O16) scaffold with biomimetic apatite layer for bone tissue engineering10.1007/s10856-006-0083-0 ↗
54. Three-dimensional printing of cerium-incorporated mesoporous calcium-silicate scaffolds for bone repair10.1007/s10853-015-9406-1 ↗
55. 45S5 Bioglass-derived glass-ceramic scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.11.025 ↗
56. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.01.039 ↗
57. Mechanical properties of bioactive glass (13–93) scaffolds fabricated by robotic deposition for structural bone repair10.1016/j.actbio.2013.02.026 ↗
58. The role of bioinorganics in improving the mechanical properties of silicate ceramics as bone regenerative materials
59. Synthesis of bioactive and machinable miserite glass-ceramics for dental implant applications10.1016/j.dental.2013.03.013 ↗
60. Borophosphate glass-ceramic scaffolds by a sodium silicate bonding process10.1016/j.jnoncrysol.2010.07.068 ↗
61. Effect of ZrO2 additions on the crystallization, mechanical and biological properties of MgO–CaO–SiO2–P2O5–CaF2 bioactive glass-ceramics10.1016/j.colsurfb.2014.03.055 ↗
62. Gelatin cryogels crosslinked with oxidized dextran and containing freshly formed hydroxyapatite as potential bone tissue-engineering scaffolds10.1002/term.1464 ↗
63. Preparation and in vitro bioactivity of novel merwinite ceramic10.1088/1748-6041/3/1/015015 ↗
64. A review of bioactive silicate ceramics10.1088/1748-6041/8/3/032001 ↗
65. Biological response of human bone cells to zinc-modified Ca–Si-based ceramics10.1016/j.actbio.2008.04.014 ↗
66. Methods of improving mechanical and biomedical properties of Ca-Si-based ceramics and scaffolds10.1586/erd.09.3 ↗
67. Porous scaffolds with tailored reactivity modulate in-vitro osteoblast responses10.1016/j.msec.2012.04.068 ↗
68. Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications10.1016/j.jmbbm.2013.10.024 ↗
69. Synthesis, mechanical properties, and in vitro biocompatibility with osteoblasts of calcium silicate-reduced graphene oxide composites10.1021/am500845x ↗
70. Surface microstructure and in vitro analysis of nanostructured akermanite (Ca2MgSi2O7) coating on biodegradable magnesium alloy for biomedical applications
71. A novel akermanite bioceramic: preparation and characteristics10.1177/0885328206057953 ↗
72. Effect of MgO contents on the mechanical properties and biological performances of bioceramics in the MgO–CaO–SiO2 system10.1007/s10856-010-4025-5 ↗
73. Porous akermanite scaffolds for bone tissue engineering: preparation, characterization, and in vitro studies10.1002/jbm.b.30456 ↗
74. Targeting calcium magnesium silicates for polycaprolactone/ceramic composite scaffolds10.1021/ab500011x ↗
75. Magnesium-containing bioactive polycrystalline silicate-based ceramics and glass-ceramics for biomedical applications10.1016/j.cossms.2014.02.004 ↗
76. Porous diopside (CaMgSi2O6) scaffold: a promising bioactive material for bone tissue engineering10.1016/j.actbio.2009.12.022 ↗
77. Improvement of mechanical properties and biocompatibility of forsterite bioceramic addressed to bone tissue engineering materials10.1016/j.jmbbm.2010.06.003 ↗
78. Novel fabrication of forsterite scaffold with improved mechanical properties10.1016/j.jallcom.2010.10.106 ↗
79. Preparation and characterization of forsterite (Mg2SiO4) bioceramics10.1016/j.ceramint.2005.07.021 ↗
80. In vitro studies of novel CaO-SiO2-MgO system composite bioceramics10.1007/s10856-007-3186-3 ↗
81. A comparative study of proliferation and osteogenic differentiation of rat adipose-derived stem cells in β-tricalcium phosphate (β-TCP), forsterite (Mg2SiO4) and clinoenstatite (MgSiO3)10.1007/s11434-013-5874-3 ↗
82. Preparation and characterization of clinoenstatite bioceramics10.1111/j.1551-2916.2010.04032.x ↗
83. Correlation between MgSiO3 phases and mechanical durability of steatite ceramics10.1016/j.jeurceramsoc.2003.12.030 ↗
84. Preparation and characteristics of a calcium magnesium silicate (bredigite) bioactive ceramic10.1016/j.biomaterials.2004.09.019 ↗
85. Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives10.1016/j.msec.2011.04.022 ↗
86. A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair10.1016/j.actbio.2010.07.012 ↗
87. Planell · 2009
88. The incorporation of strontium and zinc into a calcium-silicon ceramic for bone tissue engineering10.1016/j.biomaterials.2010.01.024 ↗
89. Finite element analysis of type B condylar head fractures and osteosynthesis using two positional screws10.1016/j.jcms.2013.06.006 ↗
90. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)10.1016/j.jmbbm.2009.10.006 ↗
91. Autologous bone marrow stromal cells loaded onto porous gelatin scaffolds containing Drynaria fortunei extract for bone repair10.1002/jbm.a.34397 ↗
92. Effects of bioactive glass nanoparticles on the mechanical and biological behavior of composite coated scaffolds10.1016/j.actbio.2010.10.015 ↗
93. Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants10.1016/j.biomaterials.2016.01.016 ↗
94. Aseptic loosening, not only a question of wear: a review of different theories10.1080/17453670610045902 ↗
95. Bioactive ceramics: processing, structures and properties10.1007/s10853-011-6063-x ↗
96. Biomorphous porous hydroxyapatite-ceramics from rattan (Calamus Rotang)10.1007/s10856-009-3857-3 ↗
97. In vitro and in vivo studies of three dimensional porous composites of biphasic calcium phosphate/poly ɛ-caprolactone: effect of bio-functionalization for bone tissue engineering10.1016/j.apsusc.2014.02.070 ↗
98. Griffith criterion for brittle fracture in graphene10.1021/nl5047686 ↗
99. Fabrication and deformation of three-dimensional hollow ceramic nanostructures10.1038/nmat3738 ↗
100. A study on in-situ synthesis of TiB2–SiC ceramic composites by reactive hot pressing10.1016/j.ceramint.2013.07.152 ↗