Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair
Source abstract
Abstract
Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis. Statement of significance This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Bone substitutes: an update10.1016/j.injury.2005.07.029 ↗
2. Bone tissue engineering using 3D printing10.1016/j.mattod.2013.11.017 ↗
3. C.W. Hull. Apparatus for production of three-dimensional objects by stereolithography. 1986.
4. Preparation of a designed poly(trimethylene carbonate) microvascular network by stereolithography10.1002/adhm.201400363 ↗
5. Preparation and mechanical properties of photo-crosslinked poly(trimethylene carbonate) and nano-hydroxyapatite composites10.3233/CH-151936 ↗
6. Fabrication of patient specific composite orbital floor implants by stereolithography10.1002/pat.3589 ↗
7. Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials10.1039/C5BM00123D ↗
8. An overview of poly(lactic-co-glycolic) acid (PLGA)-based biomaterials for bone tissue engineering10.3390/ijms15033640 ↗
9. Six bioabsorbable polymers: in vitro acute toxicity of accumulated degradation products10.1002/jab.770050208 ↗
10. In vivo investigations on composites made of resorbable ceramics and poly(lactide) used as bone graft substitutes10.1002/jbm.10024 ↗
11. The in vivo and in vitro degradation behavior of poly(trimethylene carbonate)10.1016/j.biomaterials.2005.09.017 ↗
12. In vitro degradation of trimethylene carbonate based (Co)polymers10.1002/mabi.200290000 ↗
13. Biodegradable elastomers for biomedical applications and regenerative medicine10.2217/rme.14.4 ↗
14. Effect of calcium phosphate coating and rhBMP-2 on bone regeneration in rabbit calvaria using poly(propylene fumarate) scaffolds10.1016/j.actbio.2014.12.024 ↗
15. Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres10.1016/j.biomaterials.2010.09.035 ↗
16. In vitro and in vivo bioactivity assessment of a polylactic acid/hydroxyapatite composite for bone regeneration10.4161/biom.27664 ↗
17. Nanoparticle polymer composites: where two small worlds meet10.1126/science.1130557 ↗
18. Polymer nanoparticle assemblies: a versatile route to functional mesostructures10.1021/acs.macromol.5b00375 ↗
19. General strategies for nanoparticle dispersion10.1126/science.1122225 ↗
20. Role of casting solvent on nanoparticle dispersion in polymer nanocomposites10.1021/ma500619g ↗
21. Heterotopic bone formation by nano-apatite containing poly(D, L-lactide) composites10.22203/eCM.v019a24 ↗
22. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
23. Pericyte plasticity – comparative investigation of the angiogenic and multilineage potential of pericytes from different human tissues10.22203/eCM.v031a16 ↗
24. The basic science of peri-implant bone healing10.4103/0019-5413.77129 ↗
25. Understanding peri-implant endosseous healing10.1002/j.0022-0337.2003.67.8.tb03681.x ↗
26. In vitro modeling of the bone/implant interface10.1002/(SICI)1097-0185(199606)245:2<426::AID-AR21>3.0.CO;2-Q ↗
27. Ultrastructural characterization of the implant/bone interface of immediately loaded dental implants10.1016/j.biomaterials.2003.08.070 ↗
28. Osseointegration and bioscience of implant surfaces – current concepts at bone-implant interface
29. Osteoinductive ceramics as a synthetic alternative to autologous bone grafting10.1073/pnas.1003600107 ↗
30. Mechanisms of endosseous integration
31. Bone bonding at natural and biomaterial surfaces10.1016/j.biomaterials.2007.07.049 ↗
32. Understanding and controlling the bone-implant interface10.1016/S0142-9612(99)00160-X ↗
33. Using nanoparticles to create self-healing composites10.1063/1.1784432 ↗
34. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
35. Self-directed self-assembly of nanoparticle/copolymer mixtures10.1038/nature03310 ↗
36. Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification10.1007/s10856-008-3567-2 ↗
37. Evaluation of osteoconductive scaffolds in the canine femoral multi-defect model10.1089/ten.tea.2012.0289 ↗
38. Calcium phosphate-based osteoinductive materials10.1021/cr800427g ↗
39. An autoradiographic study of calcium phosphate ceramic bone implants in turkeys
40. Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function10.1016/S0142-9612(99)00181-7 ↗
41. Calcium phosphate bone graft substitutes: failures and hopes10.1016/j.jeurceramsoc.2012.02.028 ↗
42. Three dimensionally printed mesoporous bioactive glass and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) composite scaffolds for bone regeneration10.1039/C4TB00838C ↗
43. Poly(trimethylene carbonate)-based composite materials for reconstruction of critical-sized cranial bone defects in sheep
44. Phase behavior of polymer/nanoparticle blends near a substrate10.1063/1.2899329 ↗
45. Biomedical applications of biodegradable polymers10.1002/polb.22259 ↗
46. Resorbable elastomeric networks prepared by photocrosslinking of high-molecular-weight poly(trimethylene carbonate) with photoinitiators and poly(trimethylene carbonate) macromers as crosslinking aids10.1016/j.actbio.2011.01.010 ↗
47. Preparation of biodegradable networks by photo-crosslinking lactide, epsilon-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester10.1016/j.biomaterials.2004.08.002 ↗
48. Resilient amorphous networks prepared by photo-crosslinking high-molecular-weight D, L-lactide and trimethylene carbonate macromers: mechanical properties and shape-memory behavior10.1002/mabi.201200155 ↗