3D bioprinting of complex channels within cell-laden hydrogels
Source abstract
Abstract
3D bioprinting is an emerging manufacturing approach to fabricate (cell-laden) hydrogel constructs with embedded microchannels, which are potentially useful for fundamental studies to understand vascularization and angiogenesis, and for developing organ-on-a-chip devices for disease modeling. Although numerous printing approaches have been developed, novel approaches are still needed that enable printing of channels with user-defined and tunable size, morphology, and complexity. Here, we report a novel bioprinting approach enabling printing of a sacrificial ink within commonly used photocurable hydrogels using a sequential printing approach. To achieve this, photocurable hydrogel is printed layer-by-layer as usual, but each layer is exposed to light briefly (seconds) to create partially crosslinked, self-supporting layers. At a desired thickness, immediately after the layer is printed (prior to partial crosslinking step), sacrificial hydrogel is directly printed within this viscous uncrosslinked layer. The layer was then exposed to light to confine and support the sacrificial hydrogel. After fully crosslinking the system, the sacrificial hydrogel is washed away, forming a channel. This approach allows bioprinting of cells with the matrix material and seeding of cells into channels after the sacrificial ink is removed. This approach can potentially provide a robust platform for fabricating vascularized tissues and studying cell behaviors on diverse channel surfaces. STATEMENT OF SIGNIFICANCE: 3D bioprinting is an emerging platform for the fabrication of hydrogel-based constructs for in vitro tissue/disease modelling or tissue and organ printing. Although several approaches have been developed to print channels within these constructs, it is still challenging to incorporate microchannels (for vascularization) within 3D bioprinted constructs. This study presents a novel bioprinting approach to create user-defined and tunable channels embedded within cell-laden hydrogel constructs. We report an important advance as our approach does not require complex device modifications for bioprinters or complex synthesis and processing hurdles for the inks. Since our approach does not require special chemistries, there are potentially a greater number of commercially available options for ink materials.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity10.1038/nbt.3413 ↗
2. Current and emerging applications of 3D printing in medicine10.1088/1758-5090/aa7279 ↗
3. 3D bioprinting for organ regeneration
4. Bioprinting technology: a current state-of-the-art review10.1115/1.4028512 ↗
5. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
6. Organ printing: from bioprinter to organ biofabrication line10.1016/j.copbio.2011.02.006 ↗
7. Angiogenesis in tissue engineering: breathing life into constructed tissue substitutes10.1089/ten.2006.12.2093 ↗
8. Review: advances in vascular tissue engineering using protein-based biomaterials10.1089/ten.2007.0196 ↗
9. Engineering vascularized tissue10.1038/nbt0705-821 ↗
10. Engineering thick tissues - the vascularisation problem10.22203/eCM.v014a01 ↗
11. Engineering 3D hydrogels for personalized in vitro human tissue models10.1002/adhm.201701165 ↗
12. Fabrication of vascular tissue engineering scaffolds with enhanced oxygen diffusivity and cell infiltration10.1166/jbt.2012.1061 ↗
13. Development and assessment of a biodegradable solvent cast polyester fabric small-diameter vascular graft10.1002/jbm.a.34872 ↗
14. Cellular integration and vascularisation promoted by a resorbable, particulate-leached, cross-linked poly(ε-caprolactone) scaffold10.1002/mabi.201000415 ↗
15. Prevascularization of a gas-foaming macroporous calcium phosphate cement scaffold via coculture of human umbilical vein endothelial cells and osteoblasts10.1089/ten.tea.2012.0631 ↗
16. The enhancement of VEGF-mediated angiogenesis by polycaprolactone scaffolds with surface cross-linked heparin10.1016/j.biomaterials.2010.11.038 ↗
17. Approaches to fabricating multiple-layered vascular scaffolds using hybrid electrospinning and thermally induced phase separation methods10.1021/acs.iecr.5b03462 ↗
18. A collagen/smooth muscle cell-incorporated elastic scaffold for tissue-engineered vascular grafts10.1163/156856208X386237 ↗
19. Electrospun scaffolds for tissue engineering of vascular grafts10.1016/j.actbio.2013.08.022 ↗
20. A novel single-step self-assembly approach for the fabrication of tissue-engineered vascular constructs10.1089/ten.tea.2009.0313 ↗
21. Self-healing materials with microvascular networks10.1038/nmat1934 ↗
22. Bioprinting for vascular and vascularized tissue biofabrication10.1016/j.actbio.2017.01.035 ↗
23. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues10.1038/nmat3357 ↗
24. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs10.1002/adma.201305506 ↗
25. Three-dimensional bioprinting of thick vascularized tissues10.1073/pnas.1521342113 ↗
26. Bioprinting of 3D convoluted renal proximal tubules on perfusable chips10.1038/srep34845 ↗
27. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs10.1039/C4LC00030G ↗
28. Creating perfused functional vascular channels using 3D bio-printing technology10.1016/j.biomaterials.2014.05.083 ↗
29. Generation of multi-scale vascular network system within 3D hydrogel using 3D Bio-printing technology10.1007/s12195-014-0340-0 ↗
30. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels10.1126/sciadv.1500758 ↗
31. Direct 3D printing of shear-thinning hydrogels into self-healing hydrogels10.1002/adma.201501234 ↗
32. 3D printing of shear-thinning hyaluronic acid hydrogels with secondary cross-linking10.1021/acsbiomaterials.6b00158 ↗
33. Complex 3D-printed microchannels within cell-degradable hydrogels10.1002/adfm.201801331 ↗
34. T.E. Angelini, B.S. Sumerlin, C.S. O'Bryan, W. Gregory Sawyer, T. Bhattacharjee, Organic microgel system for 3d printing of silicone structures, 2016.10.1126/sciadv.1602800 ↗
35. Self-assembled micro-organogels for 3D printing silicone structures10.1126/sciadv.1602800 ↗
36. Omnidirectional printing of 3D microvascular networks
37. Recent advances in bioink design for 3D bioprinting of tissues and organs
38. Bioprinting perfusion-enabled liver equivalents for advanced organ-on-a-chip applications10.3390/genes9040176 ↗
39. Solid freeform fabrication of designer scaffolds of hyaluronic acid for nerve tissue engineering10.1007/s10544-011-9568-9 ↗
40. High-resolution projection microstereolithography for patterning of neovasculature10.1002/adhm.201500721 ↗
41. Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells10.1007/s10439-006-9156-y ↗
42. Scaffold-free vascular tissue engineering using bioprinting10.1016/j.biomaterials.2009.06.034 ↗
43. Bioprinted osteogenic and vasculogenic patterns for engineering 3D bone tissue10.1002/adhm.201700015 ↗
44. Direct bioprinting of vessel-like tubular microfluidic channels10.1115/1.4024398 ↗
45. Characterization of printable cellular micro-fluidic channels for tissue engineering10.1088/1758-5082/5/2/025004 ↗
46. In vitro study of directly bioprinted perfusable vasculature conduits10.1039/C4BM00234B ↗
47. Degradation-mediated cellular traction directs stem cell fate in covalently crosslinked three-dimensional hydrogels10.1038/nmat3586 ↗
48. Stiffening hydrogels to probe short- and long-term cellular responses to dynamic mechanics10.1038/ncomms1792 ↗
49. Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility10.1016/j.biomaterials.2009.08.055 ↗
50. Swelling-induced surface patterns in hydrogels with gradient crosslinking density10.1002/adfm.200900622 ↗
51. Cell-laden 3D bioprinting hydrogel matrix depending on different compositions for soft tissue engineering: characterization and evaluation