journal article·2009-09

The fabrication and characterization of biodegradable HA/PHBV nanoparticle–polymer composite scaffolds

Kevin S. Jack, Shiny Velayudhan, Paul Luckman, Matt Trau, Lisbeth Grøndahl, Justin Cooper-White

Acta Biomaterialia· Volume 5· Issue 7
Publisher page

Abstract

This study reports the fabrication and characterization of nano-sized hydroxyapatite (HA)/poly(hydroxyabutyrate-co-hydroxyvalerate) (PHBV) polymer composite scaffolds with high porosity and controlled pore architectures. These scaffolds were prepared using a modified thermally induced phase-separation technique. This investigation focuses on the effect of fabrication conditions on the overall pore architecture of the scaffolds and the dispersion of HA nanocrystals within the composite scaffolds. The morphologies, mechanical properties and in vitro bioactivity of the composite scaffolds were investigated. It was noted that the pore architectures could be manipulated by varying phase-separation parameters. The HA particles were dispersed in the pore walls of the scaffolds and were well bonded to the polymer. The introduction of HA greatly increased the stiffness and strength, and improved the in vitro bioactivity of the scaffolds. The results suggest these newly developed nano-HA/PHBV composite scaffolds may serve as an effective three-dimensional substrate in bone tissue engineering.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Preparation and characterization of porous HA/PU scaffold material for soft bone repair
2. Preparation of 3-D regenerated fibroin scaffolds with freeze drying method and freeze drying/foaming technique10.1007/s10856-006-0610-z ↗
3. Scaffolds for tissue fabrication10.1016/S1369-7021(04)00233-0 ↗
4. Ratner · 2004
5. Electrospun fibrous mats with high porosity as potential scaffolds for skin tissue engineering10.1021/bm800476u ↗
6. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
7. Tissue engineering10.1126/science.8493529 ↗
8. Biomaterial challenges and approaches to stem cell use in bone reconstructive surgery10.1016/S1359-6446(04)03222-2 ↗
9. Biomaterials: where we have been and where we are going10.1146/annurev.bioeng.6.040803.140027 ↗
10. Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone10.1016/0142-9612(96)85762-0 ↗
11. Fabrication and structural characterization of porous biodegradable poly(dl-lactic-co-glycolic acid) scaffolds with controlled range of pore sizes10.1016/j.polymdegradstab.2004.10.005 ↗
12. Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique10.1016/S0142-9612(02)00562-8 ↗
13. Hydroxyapatite fiber reinforced poly(alpha-hydroxy ester) foams for bone regeneration10.1016/S0142-9612(98)00097-0 ↗
14. Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for bone tissue engineering10.1016/S0142-9612(02)00613-0 ↗
15. Evaluation of three-dimensional scaffolds made of blends of hydroxyapatite and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for bone reconstruction10.1016/j.biomaterials.2004.03.035 ↗
16. Biodegradable composite scaffolds with an interconnected spherical network for bone tissue engineering10.1016/j.biomaterials.2004.01.046 ↗
17. In vitro evaluation of hydroxyapatite reinforced polyhydroxybutyrate composite10.1016/S0928-4931(02)00019-X ↗
18. Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition10.1016/S0167-577X(02)01339-3 ↗
19. Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting10.1002/jbm.a.31237 ↗
20. Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro10.1016/j.biomaterials.2007.08.018 ↗
21. Production and surface modification of polylactide-based polymeric scaffolds for soft tissue engineering
22. Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2003.12.005 ↗
23. Systematic selection of solvents for the fabrication of 3D combined macro- and microporous polymeric scaffolds for soft tissue engineering10.1163/156856206776374142 ↗
24. Porous ceramic bone scaffolds for vascularized bone tissue regeneration10.1007/s10856-007-3346-5 ↗
25. Functionalization of poly(l-lactide) nanofibrous scaffolds with bioactive collagen molecules10.1002/jbm.a.31279 ↗
26. Surface modification of PLGA/beta-TCP scaffold for bone tissue engineering: hybridization with collagen and apatite10.1016/j.surfcoat.2007.04.035 ↗
27. Hydrogel-filled polylactide porous scaffolds for cartilage tissue engineering10.1002/jbm.b.30721 ↗
28. Effects of composition, solvent, and salt particles on the physicochemical properties of polyglycolide/poly(lactide-co-glycolide) scaffolds
29. Bone scaffolds from electrospun fiber mats of poly (3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and their blend10.1016/j.polymer.2007.01.014 ↗
30. Electrospun PHBV/collagen composite nanofibrous scaffolds for tissue engineering10.1163/156856207779146114 ↗
31. Fabrication of HA/PHBV composite scaffolds through the emulsion freezing/freeze-drying process and characterisation of the scaffolds10.1007/s10856-007-3214-3 ↗
32. A review of biodegradable polymers: uses, current developments in the synthesis and characterization of biodegradable polyesters, blends of biodegradable polymers and recent advances in biodegradation studies10.1002/(SICI)1097-0126(1998100)47:2<89::AID-PI86>3.0.CO;2-F ↗
33. Production of targeted poly(3-hydroxyalkanoates) copolymers by glycogen accumulating organisms using acetate as sole carbon source10.1016/j.jbiotec.2007.01.036 ↗
34. Engineering new bone tissue in vitro on highly porous poly(alpha-hydroxyl acids)/hydroxyapatite composite scaffolds10.1002/1097-4636(200102)54:2<284::AID-JBM16>3.0.CO;2-W ↗
35. Attachment, proliferation and differentiation of osteoblasts on random biopolyester poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds10.1016/S0142-9612(03)00561-1 ↗
36. Tissue response to nano-hydroxyapatite/collagen composite implants in marrow cavity10.1002/(SICI)1097-4636(19981215)42:4<540::AID-JBM9>3.0.CO;2-2 ↗
37. Tissue engineering scaffold material of nano-apatite crystals and polyamide composite10.1016/j.eurpolymj.2003.10.028 ↗
38. Osteoblast behaviour on HA/PE composite surfaces with different HA volumes10.1016/S0142-9612(01)00084-9 ↗
39. Effect of composition of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) on growth of fibroblast and osteoblast10.1016/j.biomaterials.2004.03.023 ↗
40. Porous poly(l-lactic acid)/apatite composites created by biomimetic process10.1002/(SICI)1097-4636(19990615)45:4<285::AID-JBM2>3.0.CO;2-2 ↗
41. Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds10.1016/j.biomaterials.2003.12.052 ↗
42. In vitro degradation of porous degradable and bioactive PHBV/wollastonite composite scaffolds10.1016/j.polymdegradstab.2004.09.001 ↗
43. Characterization and surface properties of amino-acid-modified, carbonate-containing hydroxyapatite particles10.1021/la701848c ↗
44. In vitro bioactivity of MOEP grafted ePTFE membranes for craniofacial applications10.1016/j.biomaterials.2005.01.061 ↗
45. Preparation and assessment of revised simulated body fluids10.1002/jbm.a.10482 ↗
46. Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2003.12.005 ↗
47. The FTIR studies of the poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
48. Review: mineralization of synthetic polymer scaffolds for bone tissue engineering10.1089/ten.2006.0394 ↗
49. Apatite-forming ability of carboxyl group-containing polymer gels in a simulated body fluid10.1016/S0142-9612(03)00050-4 ↗
50. Biomimetic polymer/apatite composite scaffolds for mineralized tissue engineering10.1002/mabi.200300017 ↗
51. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) composite biomaterials for bone tissue regeneration: in vitro performance assessed by osteoblast proliferation, osteoclast adhesion and resorption, and macrophage proinflammatory response10.1002/jbm.a.31174 ↗
52. Accelerated bonelike apatite growth on porous polymer/ceramic composite scaffolds in vitro10.1089/ten.2006.12.2997 ↗
53. Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.08.016 ↗
54. Tissue engineering scaffold material of nano-apatite crystals and polyamide composite10.1016/j.eurpolymj.2003.10.028 ↗
55. Study of the crystal phase and crystallization rate of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate)10.1021/ma00031a008 ↗
56. Crystallization and morphology of a bacterial thermoplastic – poly-3-hydroxybutyrate10.1007/BF01026954 ↗
57. Hydroxyapatite reinforced poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) based degradable composite bone plate10.1163/156856205774576727 ↗
58. Evaluation of three-dimensional scaffolds made of blends of hydroxyapatite and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for bone reconstruction10.1016/j.biomaterials.2004.03.035 ↗
59. Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds10.1016/j.biomaterials.2003.12.052 ↗