The processing of ultrafine-grained Mg tubes for biodegradable stents
Source abstract
Abstract
An investigation was carried out on equal-channel angular pressing (ECAP) and extrusion processing of a ZM21 Mg alloy to obtain an improved candidate material for the manufacturing of biodegradable Mg stents. Ultrafine-grain size billets of the ZM21 alloy were obtained by two-stage ECAP aimed at achieving an initial refining of the structure at 200°C and then reaching the submicrometer grain size range by lowering the processing temperature down to 150°C. The investigation revealed a significant improvement in the properties of the ECAP-treated samples compared with the starting coarse-grained ZM21 alloy. The 0.2% yield strength rose from 180 to 340 MPa after 150°C ECAP processing, while maintaining a fairly high tensile ductility. The ultrafine ZM21 alloy billets were then used for the extrusion of stent precursors having the form of small-size tubes. The grain size after extrusion remained in the submicrometer range while the hardness was revealed to be significantly higher than that of the coarse-grained ZM21 Mg alloy. It was demonstrated that processing of biodegradable Mg stent having an ultrafine-grained microstructure by ECAP and low-temperature extrusion is feasible and that the obtained products feature promising properties.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. The history of biodegradable magnesium implants: a review10.1016/j.actbio.2010.02.028 ↗
2. Degradable biomaterials based on magnesium corrosion10.1016/j.cossms.2009.04.001 ↗
3. A review on magnesium alloys as biodegradable materials10.1007/s11706-010-0024-1 ↗
4. Progress and challenge for magnesium alloys as biomaterials
5. Long-term biodegradation and associated hydrogen evolution of duplex-structured Mg–Li–Al–(RE) alloys and their mechanical properties10.1016/j.mseb.2011.08.002 ↗
6. Effects of RE on the microstructure and mechanical properties of Mg–8Zn–4Al magnesium alloy10.1016/j.msea.2005.09.104 ↗
7. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines10.1016/j.actbio.2009.09.024 ↗
8. Development in metallic biodegradable stents10.1016/j.actbio.2009.10.006 ↗
9. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation10.1016/S0921-5093(00)01660-9 ↗
10. Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids10.1016/j.actbio.2009.04.041 ↗
11. Equal channel angular pressing of magnesium alloy AZ3110.1016/j.msea.2005.08.123 ↗
12. Microstructure evolution of AZ31 Mg alloy during equal channel angular extrusion10.1016/j.msea.2006.02.045 ↗
13. Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP10.1016/S1359-6454(03)00118-6 ↗
14. Influence of preliminary extrusion conditions on the superplastic properties of a magnesium alloy processed by ECAP10.1016/j.actamat.2006.09.027 ↗
15. Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium10.1016/j.corsci.2012.01.021 ↗
16. In vivo corrosion behaviour of Mg–Mn–Zn alloy for bone implant application10.1002/jbm.a.31273 ↗
17. Theoretical assassment of magnesium alloys as degradable biomedical implants10.1016/j.actbio.2009.11.036 ↗
18. Principle of equal channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
19. Equal channel angular extrusion: from macro-mechanics to structure10.1016/S0921-5093(99)00248-8 ↗
20. Extrusion of magnesium tubes for biodegradable stent precursors10.1080/10426914.2011.560231 ↗
21. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
22. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
23. The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys10.1016/j.actamat.2007.04.043 ↗
24. The contributions of gr, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP10.1016/j.msea.2010.09.048 ↗
25. Dependence of tensile properties of AM60 magnesium alloy on microporosity and grain size10.1016/j.msea.2006.11.064 ↗
26. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing10.1016/S1359-6454(03)00161-7 ↗
27. Dynamic recrystallization and the development of microstructure during the high temperature deformation of magnesium10.1016/0001-6160(82)90031-1 ↗