journal article·2021-03

Biodegradable Zn−3Mg−0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications

Xian Tong, Wenhao Cai, Jixing Lin, Kun Wang, Lufan Jin, Zimu Shi, Dechuang Zhang, Jianguo Lin, Yuncang Li, Matthew Dargusch, Cuie Wen

Acta Biomaterialia· Volume 123
Publisher page

Abstract

Zinc (Zn)-based alloys have been considered potential biodegradable materials for medical applications due to their good biodegradability and biocompatibility. However, the insufficient mechanical properties of pure Zn do not meet the requirements of biodegradable implants. In this study, we have developed a biodegradable Zn-3Mg-0.7Mg2Si composite fabricated by high-pressure solidification. Microstructural characterization revealed that the high-pressure solidified (HPS) composite exhibited uniformly distributed fine MgZn2 granules in an α-Zn matrix. Comprehensive tests indicated that the HPS composite exhibited exceptionally high compression properties including a compressive yield strength of 406.2 MPa, an ultimate compressive strength of 1181.2 MPa, and plastic deformation up to 60% strain without cracking or fracturing. Potentiodynamic polarization tests revealed that the HPS composite showed a corrosion potential of -0.930 V, a corrosion current density of 3.5 μA/cm2, and a corrosion rate of 46.2 μm/y. Immersion tests revealed that the degradation rate of the HPS composite after immersion in Hanks' solution for 1 month and 3 months was 42.8 μm/y and 37.8 μm/y, respectively. Furthermore, an extract of the HPS composite exhibited good cytocompatibility compared with as-cast (AC) pure Zn and an AC composite at a concentration of ≤25%. These results suggest that the HPS Zn-3Mg-0.7Mg2Si composite can be anticipated as a promising biodegradable material for orthopedic applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Femoral shaft reconstruction using tissue-engineered growth of bone10.1016/S0901-5027(96)80035-X ↗
2. Refracture risk after plate removal in the forearm10.1097/00005131-199602000-00003 ↗
3. Magnesium-based compression screws: a novelty in the clinical use of implants10.1007/s11837-015-1773-1 ↗
4. In vitro studies of biomedical magnesium alloys in a simulated physiological environment: a review10.1016/j.actbio.2010.12.004 ↗
5. Degradable biomaterials based on magnesium corrosion10.1016/j.cossms.2009.04.001 ↗
6. Absorbable metal in bone surgery: a further report on the use of magnesium alloys10.1001/jama.1938.02790530018007 ↗
7. Research on an Mg–Zn alloy as a degradable biomaterial10.1016/j.actbio.2009.06.028 ↗
8. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
9. Physiological functions of mineral micronutrients (Cu, Zn, Mn, Fe, Ni, Mo, B, Cl)10.1016/j.pbi.2009.05.006 ↗
10. The neurobiology of zinc in health and disease10.1038/nrn1671 ↗
11. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
12. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn–Mg alloy10.1002/jbm.b.33341 ↗
13. Processing of a novel Zn alloy micro-tube for biodegradable vascular stent application10.1016/j.jmst.2016.08.008 ↗
14. Effects of high pressure on the microstructure and hardness of a Cu–Zn alloy10.1016/S1001-0521(08)60178-3 ↗
15. High-pressure powder X-ray diffraction at the turn of the century10.1016/S0168-583X(02)01129-1 ↗
16. Enhancement of mechanical properties of Al–Mg alloy with a high Mg content solidified under high pressures10.1016/j.scriptamat.2010.11.049 ↗
17. Microstructure and mechanical properties of high-pressure-assisted solidification of in situ Al–Mg2Si composites10.1016/j.msea.2018.07.032 ↗
18. 2018
19. Influences of albumin on in vitro corrosion of pure Zn in artificial plasma10.1016/j.corsci.2019.04.003 ↗
20. A biodegradable Zn–1Cu–0.1Ti alloy with antibacterial properties for orthopedic applications10.1016/j.actbio.2020.02.017 ↗
21. 2004
22. 2009
23. Corrosion mechanism of model zinc-magnesium alloys in atmospheric conditions10.1016/j.corsci.2008.06.008 ↗
24. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications
25. Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature10.1016/j.msea.2011.04.045 ↗
26. A statistical prediction of density and hardness of biodegradable mechanically alloyed Mg–Zn alloy using fractional factorial design10.1016/j.jallcom.2015.04.090 ↗
27. Welsch · 1993
28. Synthesis and characterisation of a new superelastic Ti–25Ta–25Nb biomedical alloy10.1016/j.jmbbm.2010.06.007 ↗
29. Novel Ti–Ta–Hf–Zr alloys with promising mechanical properties for prospective stent applications10.1038/srep37901 ↗
30. Ductile compressive behavior of biomedical alloys10.3390/met10010060 ↗
31. A critical thermodynamic evaluation of the systems Si Zn and Al Si Zn10.1016/S0364-5916(96)00033-8 ↗
32. Abundant long period stacking ordered structure induced by Ni addition into Mg–Gd–Zn alloy10.1016/j.msea.2014.09.015 ↗
33. Effect of co-modification by Ba and Sb on the microstructure of Mg2Si/Mg–Zn–Si composite and mechanism10.1016/j.jallcom.2013.12.041 ↗
34. Squeeze forming of aluminium-alloy components10.1179/030716981803275550 ↗
35. Bulk α-Fe/Nd2Fe14B nanocomposite magnets prepared by the phase transition of amorphous Nd9Fe81Co3Nb1B6 under high pressure10.1016/j.matlet.2008.05.016 ↗
36. Atomic radii in crystals10.1063/1.1725697 ↗
37. Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy10.1016/j.jallcom.2014.03.025 ↗
38. Microstructure, mechanical properties, biocompatibility, and in vitro corrosion and degradation behavior of a new Zn–5Ge alloy for biodegradable implant materials10.1016/j.actbio.2018.10.015 ↗
39. Corrosion behavior of Mg2Zn11 and MgZn2 single phases10.3365/KJMM.2013.51.6.413 ↗
40. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
41. A biodegradable Zn–1Cu–0.1Ti alloy with antibacterial properties for orthopedic applications10.1016/j.actbio.2020.02.017 ↗
42. Effect of heat treatment on microstructure and wear behavior of Al–Si alloys with various iron contents10.1016/j.matdes.2010.10.014 ↗
43. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
44. Magnesium: an update on physiological, clinical and analytical aspects10.1016/S0009-8981(99)00258-2 ↗
45. Zheng · 2015
46. Development of magnesium-based biodegradable metals with dietary trace element germanium as orthopaedic implant applications10.1016/j.actbio.2017.10.004 ↗
47. Magnesium (Mg) based interference screws developed for promoting tendon graft incorporation in bone tunnel in rabbits10.1016/j.actbio.2017.09.018 ↗
48. Degradable biomaterials based on magnesium corrosion10.1016/j.cossms.2009.04.001 ↗
49. Development of biodegradable Zn–1X binary alloys with nutrient alloying elements Mg, Ca and Sr10.1038/srep10719 ↗
50. Silicon as a trace nutrient10.1016/0048-9697(88)90190-8 ↗
51. Silicon and bone health
52. In vivo requirement for silicon in articular cartilage and connective tissue formation in the chick10.1093/jn/106.4.478 ↗
53. Reference values for serum silicon in adults10.1016/j.ab.2004.10.034 ↗
54. Effect of dietary silicon on growth and skeletal development in chickens10.1093/jn/121.2.201 ↗
55. Dietary silicon intake is positively associated with bone mineral density in men and premenopausal women of the Framingham Offspring cohort10.1359/JBMR.0301225 ↗