journal article·2024-07

Mimicking the mechanical properties of cortical bone with an additively manufactured biodegradable Zn-3Mg alloy

Yuzhe Zheng, Chengcong Huang, Yageng Li, Jiaqi Gao, Youwen Yang, Shangyan Zhao, Haodong Che, Yabin Yang, Shenglian Yao, Weishi Li, Jie Zhou, Amir A. Zadpoor, Luning Wang

Acta Biomaterialia· Volume 182
Publisher page

Abstract

Additively manufactured (AM) biodegradable zinc (Zn) alloys have recently emerged as promising porous bone-substituting materials, due to their moderate degradation rates, good biocompatibility, geometrically ordered microarchitectures, and bone-mimicking mechanical properties. While AM Zn alloy porous scaffolds mimicking the mechanical properties of trabecular bone have been previously reported, mimicking the mechanical properties of cortical bone remains a formidable challenge. To overcome this challenge, we developed the AM Zn-3Mg alloy. We used laser powder bed fusion to process Zn-3Mg and compared it with pure Zn. The AM Zn-3Mg alloy exhibited significantly refined grains and a unique microstructure with interlaced α-Zn/Mg2Zn11 phases. The compressive properties of the solid Zn-3Mg specimens greatly exceeded their tensile properties, with a compressive yield strength of up to 601 MPa and an ultimate strain of >60 %. We then designed and fabricated functionally graded porous structures with a solid core and achieved cortical bone-mimicking mechanical properties, including a compressive yield strength of >120 MPa and an elastic modulus of ≈20 GPa. The biodegradation rates of the Zn-3Mg specimens were lower than those of pure Zn and could be adjusted by tuning the AM process parameters. The Zn-3Mg specimens also exhibited improved biocompatibility as compared to pure Zn, including higher metabolic activity and enhanced osteogenic behavior of MC3T3 cells cultured with the extracts from the Zn-3Mg alloy specimens. Altogether, these results marked major progress in developing AM porous biodegradable metallic bone substitutes, which paved the way toward clinical adoption of Zn-based scaffolds for the treatment of load-bearing bony defects. STATEMENT OF SIGNIFICANCE: Our study presents a significant advancement in the realm of biodegradable metallic bone substitutes through the development of an additively manufactured Zn-3Mg alloy. This novel alloy showcases refined grains and a distinctive microstructure, enabling the fabrication of functionally graded porous structures with mechanical properties resembling cortical bone. The achieved compressive yield strength and elastic modulus signify a critical leap toward mimicking the mechanical behavior of load-bearing bone. Moreover, our findings reveal tunable biodegradation rates and enhanced biocompatibility compared to pure Zn, emphasizing the potential clinical utility of Zn-based scaffolds for treating load-bearing bony defects. This breakthrough opens doors for the wider adoption of zinc-based materials in regenerative orthopedics.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Additively manufactured biodegradable porous metals10.1016/j.actbio.2020.08.018 ↗
2. Additive manufacturing of biomaterials for bone tissue engineering – A critical review of the state of the art and new concepts10.1016/j.pmatsci.2022.100963 ↗
3. Fatigue performance of additively manufactured meta-biomaterials: the effects of topology and material type10.1016/j.actbio.2017.11.014 ↗
4. Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials10.1016/j.jmbbm.2017.12.029 ↗
5. Dual modulation of bone formation and resorption with zoledronic acid-loaded biodegradable magnesium alloy implants improves osteoporotic fracture healing: an in vitro and in vivo study10.1016/j.actbio.2017.10.033 ↗
6. Additive manufacturing of material scaffolds for bone regeneration: toward application in the clinics10.1002/adfm.202006967 ↗
7. Biodegradable magnesium-based implants in orthopedics—a general review and perspectives10.1002/advs.201902443 ↗
8. Surface modification on biodegradable zinc alloys10.1016/j.jmrt.2023.06.149 ↗
9. Zinc as a therapeutic agent in bone regeneration10.3390/ma13102211 ↗
10. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
11. Additively manufactured biodegradable porous iron10.1016/j.actbio.2018.07.011 ↗
12. Corrosion fatigue behavior of additively manufactured biodegradable porous iron10.1016/j.corsci.2019.05.003 ↗
13. Additively manufactured biodegradable porous zinc10.1016/j.actbio.2019.10.034 ↗
14. Physiomimetic biocompatibility evaluation of directly printed degradable porous iron implants using various cell types10.1016/j.actbio.2023.07.056 ↗
15. Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing10.1108/RPJ-08-2015-0100 ↗
16. Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
17. Direct metal printing of zinc: from single laser tracks to high density parts, European Congress and Exhibition on Powder Metallurgy
18. Additively manufactured biodegradable porous magnesium10.1016/j.actbio.2017.12.008 ↗
19. Development of degradable magnesium-based metal implants and their function in promoting bone metabolism (A review)10.1016/j.jot.2022.09.013 ↗
20. A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying10.1016/j.jmbbm.2018.03.018 ↗
21. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies10.1016/j.actbio.2022.03.055 ↗
22. Additive manufacturing of biodegradable Zn-xMg alloys: effect of Mg content on manufacturability, microstructure and mechanical properties
23. Improving the mechanical properties of additively manufactured micro-architected biodegradable metals10.1007/s11837-021-04949-8 ↗
24. Effects of magnesium on microstructure, properties and degradation behaviors of zinc-based alloys prepared by selective laser melting10.1088/2053-1591/ac88b7 ↗
25. Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material10.1016/j.matdes.2015.06.181 ↗
26. Influences of the Ag content on microstructures and properties of Zn–3Mg–xAg alloy by spark plasma sintering10.1016/j.jmrt.2023.03.051 ↗
27. 2004
28. Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation10.1016/j.msec.2017.11.021 ↗
29. Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components10.1016/j.pmatsci.2023.101153 ↗
30. Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy10.1016/j.jallcom.2014.03.025 ↗
31. Microstructural evolution and mechanical properties of pure Zn fabricated by selective laser melting10.1016/j.msea.2022.143276 ↗
32. Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification10.1016/j.jmst.2018.09.065 ↗
33. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
34. Defect, microstructure and mechanical properties of Mg–Gd binary alloy additively manufactured by selective laser melting10.1016/j.msea.2022.143572 ↗
35. Effect of grain structure on the mechanical properties and in vitro corrosion behavior of additively manufactured pure Zn
36. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
37. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
38. Origin of high tension-compression yield asymmetry in as-extruded pure zinc10.1016/j.scriptamat.2021.113922 ↗
39. Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr10.1038/srep10719 ↗
40. Biodegradable Zn−3Mg−0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications10.1016/j.actbio.2020.12.059 ↗
41. Crack initiation considering the possible stress acting on the crack surface under uniaxial tension or compression10.1016/j.tafmec.2022.103433 ↗
42. Microstructure, mechanical properties and fracture behavior of as-extruded Zn-Mg binary alloys10.1007/s40195-017-0585-4 ↗
43. Advanced zinc–magnesium alloys prepared by mechanical alloying and spark plasma Sintering10.3390/ma15155272 ↗
44. Introducing Laves phase strengthening into an ultrafine-grained equiatomic CrFeNi alloy by niobium addition10.1016/j.msea.2020.140611 ↗
45. Extreme values of the shear modulus for hexagonal crystals10.1016/j.scriptamat.2017.07.002 ↗
46. Energetics of residual dislocations associated with slip–twin and slip–GBs interactions10.1016/j.msea.2012.02.023 ↗
47. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
48. Effect of plastic deformation on the structure and mechanical properties of the Zn-4Ag-1Cu Zinc alloy10.3390/ma16134646 ↗
49. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
50. Biomimetic porous Mg with tunable mechanical properties and biodegradation rates for bone regeneration10.1016/j.actbio.2018.11.045 ↗
51. Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds10.1016/j.actbio.2019.04.012 ↗
52. Open-porous biodegradable magnesium scaffolds produced by selective laser melting for individualized bone replacement
53. Additive manufacturing of magnesium–zinc–zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printing10.1016/j.matdes.2019.107683 ↗
54. Selective laser melted Fe-Mn bone scaffold: microstructure, corrosion behavior and cell response10.1088/2053-1591/ab62f5 ↗
55. Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications10.1016/j.actbio.2019.12.018 ↗
56. Additively manufactured functionally graded biodegradable porous iron10.1016/j.actbio.2019.07.013 ↗
57. Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold
58. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals10.1016/j.actbio.2022.01.049 ↗
59. High strength WE43 microlattice structures additively manufactured by laser powder bed fusion10.1016/j.mtla.2021.101067 ↗
60. Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion
61. Challenges and solutions for the additive manufacturing of biodegradable magnesium implants10.1016/j.eng.2020.02.015 ↗
62. Additively manufactured functionally graded biodegradable porous zinc10.1039/C9BM01904A ↗
63. Biomimetic porous scaffolds for bone tissue engineering10.1016/j.mser.2014.04.001 ↗
64. Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces
65. Fatigue and dynamic biodegradation behavior of additively manufactured Mg scaffolds10.1016/j.actbio.2021.08.040 ↗
66. Effect of zinc (Zn) on the microstructure and corrosion behaviour of magnesium (Mg)
67. In vitro degradation and cytotoxicity response of Mg–4% Zn–0.5% Zr (ZK40) alloy as a potential biodegradable material10.1016/j.actbio.2013.07.001 ↗
68. Additive manufacturing of biodegradable metals: current research status and future perspectives10.1016/j.actbio.2019.04.046 ↗
69. Effects of thermomechanical processing on microstructures, mechanical properties, and biodegradation behaviour of dilute Zn–Mg alloys10.1016/j.jmrt.2023.01.203 ↗
70. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys10.1016/j.msec.2015.08.015 ↗
71. Grain size distribution effects on the corrosion behaviour of materials10.1016/j.corsci.2012.04.040 ↗
72. Effects of secondary phase and grain size on the corrosion of biodegradable Mg–Zn–Ca alloys10.1016/j.msec.2014.12.049 ↗
73. Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid10.1016/j.corsci.2009.11.030 ↗
74. Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy10.1016/j.corsci.2011.12.018 ↗
75. Corrosion and passivation in nanoscopic and microscopic dimensions: the influence of grains and grain boundaries10.1179/147842204225016813 ↗
76. Porous magnesium-based scaffolds for tissue engineering10.1016/j.msec.2016.11.027 ↗
77. Improvement of corrosion resistance and biocompatibility of rare-earth WE43 magnesium alloy by neodymium self-ion implantation10.1016/j.corsci.2015.01.049 ↗
78. Corrosion fatigue behavior of additively manufactured biodegradable porous zinc10.1016/j.actbio.2020.02.001 ↗
79. Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials10.1016/j.mseb.2011.04.017 ↗
80. Mechanical properties, in vitro degradation behavior, hemocompatibility and cytotoxicity evaluation of Zn–1.2Mg alloy for biodegradable implants10.1039/C6RA14300H ↗
81. Additively manufactured functionally graded biodegradable porous zinc
82. Current status and perspectives of zinc-based absorbable alloys for biomedical applications10.1016/j.actbio.2019.07.034 ↗
83. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
84. Magnesium-based biomaterials as emerging agents for bone repair and regeneration: from mechanism to application10.1016/j.jma.2021.03.004 ↗
85. 10993-5:2009(En): Biological Evaluation of Medical Devices—Part 5: Tests for In Vitro Cytotoxicity · 2009
86. Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells10.1002/(SICI)1097-4636(199802)39:2<331::AID-JBM22>3.0.CO;2-E ↗
87. Metalwork removal in potential army recruits. evidence-based changes to entry criteria10.1136/jramc-151-01-01 ↗
88. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
89. Facile preparation of poly(lactic acid)/brushite bilayer coating on biodegradable magnesium alloys with multiple functionalities for orthopedic application10.1021/acsami.7b00209 ↗