journal article·2023-03

Bioprinting of structurally organized meniscal tissue within anisotropic melt electrowritten scaffolds

Xavier Barceló, Kian F. Eichholz, Inês F. Gonçalves, Orquidea Garcia, Daniel J. Kelly

Acta Biomaterialia· Volume 158
Publisher page

Abstract

The meniscus is characterised by an anisotropic collagen fibre network which is integral to its biomechanical functionality. The engineering of structurally organized meniscal grafts that mimic the anisotropy of the native tissue remains a significant challenge. In this study, inkjet bioprinting was used to deposit a cell-laden bioink into additively manufactured scaffolds of differing architectures to engineer fibrocartilage grafts with user defined collagen architectures. Polymeric scaffolds consisting of guiding fibre networks with varying aspect ratios (1:1; 1:4; 1:16) were produced using either fused deposition modelling (FDM) or melt electrowriting (MEW), resulting in scaffolds with different internal architectures and fibre diameters. Scaffold architecture was found to influence the spatial organization of the collagen network laid down by the jetted cells, with higher aspect ratios (1:4 and 1:16) supporting the formation of structurally anisotropic tissues. The MEW scaffolds supported the development of a fibrocartilaginous tissue with compressive mechanical properties similar to that of native meniscus, while the anisotropic tensile properties of these constructs could be tuned by altering the fibre network aspect ratio. This MEW framework was then used to generate scaffolds with spatially distinct fibre patterns, which in turn supported the development of heterogenous tissues consisting of isotropic and anisotropic collagen networks. Such bioprinted tissues could potentially form the basis of new treatment options for damaged and diseased meniscal tissue. STATEMENT OF SIGNIFICANCE: This study describes a multiple tool biofabrication strategy which enables the engineering of spatially organized fibrocartilage tissues. The architecture of MEW scaffolds can be tailored to not only modulate the directionality of the collagen fibres laid down by cells, but also to tune the anisotropic tensile mechanical properties of the resulting constructs, thereby enabling the engineering of biomimetic meniscal-like tissues. Furthermore, the inherent flexibility of MEW enables the development of zonally defined and potentially patient-specific implants.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Electrospun Nanofibers in Biomedical Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. The basic science of human knee menisci: structure, composition, and function10.1177/1941738111429419 ↗
2. The role of meniscal tissue in joint protection in early osteoarthritis10.1007/s00167-016-4069-2 ↗
3. Epidemiology of meniscal injuries in US high school athletes between 2007 and 201310.1007/s00167-015-3814-2 ↗
4. Review of meniscal injury and associated sports10.1177/036354658501300101 ↗
5. Toward tissue engineering of the knee meniscus10.1089/107632701300062697 ↗
6. Building an anisotropic meniscus with zonal variations10.1089/ten.tea.2013.0098 ↗
7. Comparison of scaffolds and culture conditions for tissue engineering of the knee meniscus10.1089/ten.2005.11.1095 ↗
8. 3D-bioprinting ready-to-implant anisotropic menisci recapitulate healthy meniscus phenotype and prevent secondary joint degeneration10.7150/thno.54864 ↗
9. The meniscus in normal and osteoarthritic tissues: facing the structure property challenges and current treatment trends10.1146/annurev-bioeng-060418-052547 ↗
10. Surgical and tissue engineering strategies for articular cartilage and meniscus repair10.1038/s41584-019-0255-1 ↗
11. 3D bioprinting for meniscus tissue engineering: a review of key components, recent developments and future opportunities10.2217/3dp-2021-0017 ↗
12. Engineering anisotropic meniscus: zonal functionality and spatiotemporal drug delivery10.1089/ten.teb.2020.0096 ↗
13. Biomechanical factors in tissue engineered meniscal repair10.1097/00003086-199910001-00025 ↗
14. The knee meniscus: structure-function, pathophysiology, current repair techniques, and prospects for regeneration10.1016/j.biomaterials.2011.06.037 ↗
15. Structure—function relationships of equine menisci10.1371/journal.pone.0194052 ↗
16. Assessment of a bovine co-culture, scaffold-free method for growing meniscus-shaped constructs10.1089/ten.2006.0291 ↗
17. Engineering self-assembled neomenisci through combination of matrix augmentation and directional remodeling10.1016/j.actbio.2020.04.019 ↗
18. Bilayered extracellular matrix derived scaffolds with anisotropic pore architecture guide tissue organization during osteochondral defect repair10.1016/j.actbio.2022.03.009 ↗
19. Multilayered silk scaffolds for meniscus tissue engineering10.1016/j.biomaterials.2010.08.115 ↗
20. The effect of nanofiber alignment on the maturation of engineered meniscus constructs10.1016/j.biomaterials.2007.01.004 ↗
21. Multitechnology biofabrication: a new approach for the manufacturing of functional tissue structures?10.1016/j.tibtech.2020.04.014 ↗
22. Digital micromirror device projection printing system for meniscus tissue engineering10.1016/j.actbio.2013.03.020 ↗
23. 3D-Bioprinting of polylactic acid (PLA) nanofiber–alginate hydrogel bioink containing human adipose-derived stem cells10.1021/acsbiomaterials.6b00196 ↗
24. Hydrogels of agarose, and methacrylated gelatin and hyaluronic acid are more supportive for in vitro meniscus regeneration than three dimensional printed polycaprolactone scaffolds10.1016/j.ijbiomac.2018.09.065 ↗
25. Direct freeform fabrication of seeded hydrogels in arbitrary geometries10.1089/ten.2006.12.1325 ↗
26. PCL-MECM-Based hydrogel hybrid scaffolds and meniscal fibrochondrocytes promote whole meniscus regeneration in a rabbit meniscectomy model10.1021/acsami.9b13611 ↗
27. Meniscus ECM-functionalised hydrogels containing infrapatellar fat pad-derived stem cells for bioprinting of regionally defined meniscal tissue10.1002/term.2602 ↗
28. Generating ready-to-implant anisotropic menisci by 3D-bioprinting protein-releasing cell-laden hydrogel-polymer composite scaffold
29. Anatomical meniscus construct with zone specific biochemical composition and structural organization10.1016/j.biomaterials.2019.119361 ↗
30. Y. Sun, Y. You, W. Jiang, B. Wang, Q. Wu, K. Dai, 3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration, Sci. Adv.6(37) eaay1422.10.1126/sciadv.aay1422 ↗
31. Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep10.1126/scitranslmed.3009696 ↗
32. Orchestrated biomechanical, structural, and biochemical stimuli for engineering anisotropic meniscus10.1126/scitranslmed.aao0750 ↗
33. Bioink with cartilage-derived extracellular matrix microfibers enables spatial control of vascular capillary formation in bioprinted constructs10.1088/1758-5090/ac6282 ↗
34. Biofabrication of spatially organised tissues by directing the growth of cellular spheroids within 3D printed polymeric microchambers10.1016/j.biomaterials.2018.12.028 ↗
35. Bioprinting of biomimetic self-organised cartilage with a supporting joint fixation device10.1088/1758-5090/ac36be ↗
36. Integrating melt electrowriting and inkjet bioprinting for engineering structurally organized articular cartilage10.1016/j.biomaterials.2022.121405 ↗
37. Polycaprolactone as biomaterial for bone scaffolds: Review of literature10.1016/j.jobcr.2019.10.003 ↗
38. The return of a forgotten polymer—polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
39. Mediating human stem cell behaviour via defined fibrous architectures by melt electrospinning writing10.1016/j.actbio.2018.05.048 ↗
40. Direct writing by way of melt electrospinning10.1002/adma.201103482 ↗
41. Bi-layered micro-fibre reinforced hydrogels for articular cartilage regeneration10.1016/j.actbio.2019.06.030 ↗
42. Potential of melt electrowritten scaffolds seeded with meniscus cells and mesenchymal stromal cells10.3390/ijms222011200 ↗
43. Melt electro-written scaffolds with box-architecture support orthogonally oriented collagen10.1088/1758-5090/ac41a1 ↗
44. Radial tie fibers influence the tensile properties of the bovine medial meniscus10.1002/jor.1100120205 ↗
45. Material properties of the normal medial bovine meniscus10.1002/jor.1100070602 ↗
46. Material properties and structure-function relationships in the menisci10.1097/00003086-199003000-00004 ↗
47. The tensile properties of the cartilage of human femoral condyles related to the content of collagen and glycosaminoglycans10.1016/0304-4165(73)90093-7 ↗
48. Postnatal changes to the mechanical properties of articular cartilage are driven by the evolution of its collagen network10.22203/eCM.v029a09 ↗
49. How to design, develop and build a fully-integrated melt electrowriting 3D printer
50. Highly elastic and tough interpenetrating polymer network-structured hybrid hydrogels for cyclic mechanical loading-enhanced tissue engineering10.1021/acs.chemmater.7b02995 ↗
51. Tuning the degradation rate of alginate-based bioinks for bioprinting functional cartilage tissue10.3390/biomedicines10071621 ↗
52. Fact versus artifact: avoiding erroneous estimates of sulfated glycosaminoglycan content using the dimethylmethylene blue colorimetric assay for tissue-engineered constructs10.22203/eCM.v029a17 ↗
53. Determination of hydroxyproline in tissues and the evaluation of the collagen content of the tissues10.1134/S106193480701011X ↗
54. Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy10.1007/s10237-011-0325-z ↗
55. Low-oxygen conditions promote synergistic increases in chondrogenesis during co-culture of human osteoarthritic stem cells and chondrocytes10.1002/term.2608 ↗
56. Mechanical testing of cartilage constructs10.1007/978-1-4939-2938-2_20 ↗
57. Analyzing real-time PCR data by the comparative CT method10.1038/nprot.2008.73 ↗
58. Fluorometric assay of DNA in cartilage explants using Hoechst 3325810.1016/0003-2697(88)90532-5 ↗
59. Intraspecies and interspecies comparison of the compressive properties of the medial meniscus10.1114/B:ABME.0000049040.70767.5c ↗
60. Advances in hybrid fabrication toward hierarchical tissue constructs10.1002/advs.201902953 ↗
61. Oxidized alginate-based hydrogels for tissue engineering applications: a review10.1021/acs.biomac.7b01331 ↗
62. Applications of oxidized alginate in regenerative medicine10.1039/D0TB02691C ↗
63. Polymers for melt electrowriting10.1002/adhm.202001232 ↗
64. Pore geometry regulates early stage human bone marrow cell tissue formation and organisation10.1007/s10439-013-0748-z ↗
65. The effect of geometry on three-dimensional tissue growth10.1098/rsif.2008.0064 ↗
66. Guidance of engineered tissue collagen orientation by large-scale scaffold microstructures10.1016/j.jbiomech.2005.05.020 ↗
67. The effect of pore size within fibrous scaffolds fabricated using melt electrowriting on human bone marrow stem cell osteogenesis10.1088/1748-605X/ab49f2 ↗
68. Reinforcing interpenetrating network hydrogels with 3D printed polymer networks to engineer cartilage mimetic composites10.1088/1758-5090/ab8708 ↗
69. A chondroitinase-ABC and TGF-beta1 treatment regimen for enhancing the mechanical properties of tissue-engineered fibrocartilage10.1016/j.actbio.2012.09.037 ↗
70. Combined use of chondroitinase-ABC, TGF-β1, and collagen crosslinking agent lysyl oxidase to engineer functional neotissues for fibrocartilage repair10.1016/j.biomaterials.2014.04.083 ↗
71. Developing functional musculoskeletal tissues through hypoxia and lysyl oxidase-induced collagen cross-linking10.1073/pnas.1414271111 ↗
72. Bone marrow mesenchymal stem cell-derived tissues are mechanically superior to meniscus cells10.1089/ten.tea.2020.0183 ↗
73. Fiber development and matrix production in tissue-engineered menisci using bovine mesenchymal stem cells and fibrochondrocytes10.1080/03008207.2016.1267152 ↗
74. Temporal enzymatic treatment to enhance the remodelling of multiple cartilage microtissues into a structurally organised tissue
75. Modulating microfibrillar alignment and growth factor stimulation to regulate mesenchymal stem cell differentiation10.1016/j.actbio.2017.10.010 ↗
76. Fibronectin adherent cell populations derived from avascular and vascular regions of the meniscus have enhanced clonogenicity and differentiation potential under physioxia10.3389/fbioe.2021.789621 ↗
77. Melt electrospinning writing of highly ordered large volume scaffold architectures10.1002/adma.201706570 ↗
78. Convergence of machine vision and melt electrowriting10.1002/adma.202100519 ↗