3D printing calcium phosphate ceramics with high osteoinductivity through pore architecture optimization
Source abstract
Abstract
The osteoinductivity of 3D printed calcium phosphate (CaP) ceramics has a large gap compared with those prepared by conventional foaming methods, and improving the osteoinductivity of 3D printing CaP ceramics is crucial for successful application in bone regeneration. Pore architecture plays a critical role in osteoinductivity. In this study, CaP ceramics with a hexagonal close-packed (HCP) spherical pore structure were successfully fabricated using DLP printing technology. Additionally, octahedral (Octahedral), diamond (Diamond), and helical (Gyroid) structures were constructed with similar porosity and macropore diameter. CaP ceramics with the HCP structure exhibited higher compression strength (8.39 ± 1.82 MPa) and lower permeability (6.41 × 10-11 m2) compared to the Octahedral, Diamond, and Gyroid structures. In vitro cellular responses indicated that the macropore architecture strongly influenced the local growth rate of osteoblast-formed cell tissue; cells grew uniformly and formed circular rings in the HCP group. Furthermore, the HCP group promoted the expression of osteogenic genes and proteins more effectively than the other three groups. The outstanding osteoinductivity of the HCP group was confirmed in canine intramuscular implantation studies, where the new bone area reached up to 8.02 ± 1.94 % after a 10-week implantation. Additionally, the HCP group showed effective bone regeneration in repairing femoral condyle defects. Therefore, our findings suggest that 3D printed CaP bioceramics with an HCP structure promote osteoinductivity and can be considered as candidates for personalized precise treatment of bone defects in clinical applications. STATEMENT OF SIGNIFICANCE: 1. 3D printing BCP ceramics with high osteoinductivity were constructed through pore architecture optimization. 2. BCP ceramics with HCP structure exhibited relatively higher mechanical strength and lower permeability than those with Octahedral, Diamond and Gyroid structures. 3. BCP ceramics with HCP structure could promote the osteogenic differentiation of MC3T3-E1, and showed the superior in-vivo osteoinductivity and bone regeneration comparing with the other structures.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Advanced strategies of biomimetic tissue-engineered grafts for bone regeneration10.1002/adhm.202100408 ↗
2. Review of bone graft and bone substitutes with an emphasis on fracture surgeries10.1186/s40824-019-0157-y ↗
3. Photopolymer formulation to minimize feature size, surface roughness, and stair-stepping in digital light processing-based three-dimensional printing
4. Stereolithography-based additive manufacturing of high-performance osteoinductive calcium phosphate ceramics by a digital light-processing system10.1021/acsbiomaterials.9b01663 ↗
5. 3D printed tricalcium phosphate-bioglass scaffold with gyroid structure enhance bone ingrowth in challenging bone defect treatment
6. Multi-element processed pyritum mixed to β-tricalcium phosphate to obtain a 3D-printed porous scaffold: an option for treatment of bone defects10.1016/j.msec.2021.112326 ↗
7. The material and biological characteristics of osteoinductive calcium phosphate ceramics10.1093/rb/rbx024 ↗
8. Biodegradable elastic sponge from nanofibrous biphasic calcium phosphate ceramic as an advanced material for regenerative medicine10.1002/adfm.202102911 ↗
9. Material extrusion additive manufacturing of advanced ceramics: towards the production of large components10.1016/j.jeurceramsoc.2022.10.019 ↗
10. Hierarchical porous ceramics with distinctive microstructures by emulsion-based direct ink writing10.1021/acsami.2c03245 ↗
11. Microstructure and dynamic microhardness of additively manufactured (TiB2+TiC)/AlSi10Mg composites with AlSi10Mg and B4C coated Ti powder10.1016/j.jallcom.2023.168718 ↗
12. Additive micro-manufacturing of crack-free pdcs by two-photon polymerization of a single, low-shrinkage preceramic resin
13. Bone grafts and biomaterials substitutes for bone defect repair: a review
14. Application of osteoinductive calcium phosphate ceramics in giant cell tumor of the sacrum: report of six cases10.1093/rb/rbac017 ↗
15. Coupling between macrophage phenotype, angiogenesis and bone formation by calcium phosphates10.1016/j.msec.2021.111948 ↗
16. Osteoinduction by foamed and 3D-printed calcium phosphate scaffolds: effect of nanostructure and pore architecture10.1021/acsami.7b14175 ↗
17. Osteoporotic bone recovery by a bamboo-structured bioceramic with controlled release of hydroxyapatite nanoparticles
18. Osteoinductivity of porous biphasic calcium phosphate ceramic spheres with nanocrystalline and their efficacy in guiding bone regeneration10.1021/acsami.8b18525 ↗
19. Comparative proteomic analysis of human mesenchymal stromal cell behavior on calcium phosphate ceramics with different osteoinductive potential
20. Preparation of multigradient hydroxyapatite scaffolds and evaluation of their osteoinduction properties10.1093/rb/rbac001 ↗
21. Surface curvature differentially regulates stem cell migration and differentiation via altered attachment morphology and nuclear deformation10.1002/advs.201600347 ↗
22. Correlations between macrophage polarization and osteoinduction of porous calcium phosphate ceramics10.1016/j.actbio.2019.12.019 ↗
23. 3D printed calcium phosphate scaffolds with controlled release of osteogenic drugs for bone regeneration10.1016/j.cej.2021.130961 ↗
24. Strategies of immobilizing BMP-2 with 3D-printed scaffolds to improve osteogenesis10.2217/rme-2022-0222 ↗
25. Construction of biomimetic natural wood hierarchical porous-structure bioceramic with micro/nanowhisker coating to modulate cellular behavior and osteoinductive activity10.1021/acsami.0c15205 ↗
26. A review of bioceramic porous scaffolds for hard tissue applications: effects of structural features10.1016/j.ceramint.2020.03.192 ↗
27. The role of calcium phosphate surface structure in osteogenesis and the mechanisms involved10.1016/j.actbio.2019.12.034 ↗
28. Mineralization in micropores of calcium phosphate scaffolds10.1016/j.actbio.2018.11.003 ↗
29. The effect of geometry on three-dimensional tissue growth10.1098/rsif.2008.0064 ↗
30. Fabrication and biological evaluation of 3D-printed calcium phosphate ceramic scaffolds with distinct macroporous geometries through digital light processing technology10.1093/rb/rbac005 ↗
31. Optimization of 3D printed osteochondral tissue geometries using finite element analysis
32. Zhang · 2019
33. 3D printing of customized key biomaterials genomics for bone regeneration
34. A novel hollow-tube-biphasic-whisker-modified calcium phosphate ceramics with simultaneously enhanced mechanical strength and osteogenic activity10.1002/adfm.202204974 ↗
35. Material-dependent bone induction by calcium phosphate ceramics: a 2.5-year study in dog10.1016/S0142-9612(00)00450-6 ↗
36. 3D-printed ceramic bone scaffolds with variable pore architectures10.3390/ijms21186942 ↗
37. Design and fabrication of biomimicking radially graded scaffolds via digital light processing 3D printing for bone regeneration10.1039/D3TB01573D ↗
38. The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics10.1016/j.ceramint.2010.09.014 ↗
39. Review on the strategies to improve the mechanical strength of highly porous bone bioceramic scaffolds10.1016/j.jeurceramsoc.2023.09.003 ↗
40. High-strength hydroxyapatite scaffolds with minimal surface macrostructures for load-bearing bone regeneration10.1002/adfm.202204182 ↗
41. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic10.1016/S0272-8842(96)00009-0 ↗
42. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone10.1039/C7TB00741H ↗
43. Bone tissue regeneration: the role of finely tuned pore architecture of bioactive scaffolds before clinical translation
44. Architectural design of 3D printed scaffolds controls the volume and functionality of newly formed bone10.1002/adhm.201801353 ↗
45. Cell-perceived substrate curvature dynamically coordinates the direction, speed, and persistence of stromal cell migration
46. Bone tissue regeneration: the role of scaffold geometry10.1039/C4BM00291A ↗
47. Substrate curvature as a cue to guide spatiotemporal cell and tissue organization10.1016/j.biomaterials.2019.119739 ↗
48. Gaussian curvature–driven direction of cell fate toward osteogenesis with triply periodic minimal surface scaffolds10.1073/pnas.2206684119 ↗
49. Geometric cues for directing the differentiation of mesenchymal stem cells10.1073/pnas.0903269107 ↗
50. Optimal regenerative repair of large segmental bone defect in a goat model with osteoinductive calcium phosphate bioceramic implants
51. Design of hydroxyapatite bioceramics with micro-/nano-topographies to regulate the osteogenic activities of bone morphogenetic protein-2 and bone marrow stromal cells10.1039/C9NR10561A ↗
52. Coating of VEGF-releasing scaffolds with bioactive glass for angiogenesis and bone regeneration10.1016/j.biomaterials.2006.01.033 ↗
53. Dual 3D printing for vascularized bone tissue regeneration10.1016/j.actbio.2021.01.012 ↗
54. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
55. Effect of the interconnecting window diameter of hydroxyapatite scaffolds on vascularization and osteoinduction10.1016/j.ceramint.2022.05.162 ↗
56. Enhanced effect of β-tricalcium phosphate phase on neovascularization of porous calcium phosphate ceramics: In vitro and in vivo evidence10.1016/j.actbio.2014.09.028 ↗
57. Next-generation finely controlled graded porous antibacterial bioceramics for high-efficiency vascularization in orbital reconstruction
58. Integrating pore architectures to evaluate vascularization efficacy in silicate-based bioceramic scaffolds
59. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
60. Macroporous and nanofibrous polymer scaffolds and polymer/bone-like apatite composite scaffolds generated by sugar spheres10.1002/jbm.a.30704 ↗
61. Biomimetic polymer/apatite composite scaffolds for mineralized tissue engineering10.1002/mabi.200300017 ↗
62. Substrate geometry directs the in vitro mineralization of calcium phosphate ceramics10.1016/j.actbio.2013.10.026 ↗