A study of a bio-inspired impact resistant carbon fiber laminate with a sinusoidal helicoidal structure in the mandibles of trap-jaw ants
Source abstract
Abstract
The majority of living organisms demonstrate remarkable attributes and have evolved effective mechanisms for synthesizing impact-resistant and damage-tolerant structures. One exemplary instance is the rapid mandible strikes exhibited by trap-jaw ants, which are a highly aggressive species of terrestrial social organisms. An impact-resistant sinusoidal helicoidal architecture is discovered in the mandibles of trap-jaw ants. The bioinspired laminate with a bi-sinusoidal helicoidal structure was manufactured using unidirectional carbon fiber prepreg by mold press forming. This study examines the impact resistance and damage tolerance of a bionic laminate through low velocity impact, computed tomography, and compression after impact tests. The results demonstrate that bionic laminates effectively limit damage propagation within the plane while enhancing energy dissipation capacity. The sinusoidal helicoidal configuration enhances cushioning capability against impact forces, retards penetration under higher loads, hinders crack propagation, and improves residual strength. Bionic laminates provide a valuable solution for damage tolerance through the resistance to through-the-thickness loads. STATEMENT OF SIGNIFICANCE: Helicoidal and sinusoidal helicoidal microstructures have been identified in the cross-section of the jaws of trap-jaw ants. The multiple waviness ratio parameters are designed for fabricating a sinusoidal helicoidal structure laminate using unidirectional carbon fiber prepreg through the mold press forming technique. This results in a damage-tolerant mechanism characterized by reduced delamination damage, which leads to a stiffer mechanical response. Meanwhile, it enhances resistance to crack propagation, leading to the formation of discontinuous delamination areas and the accumulation of sub-critical failures. Additionally, the sinusoidal helicoidal structure laminate combines the cushioning performance of bi-sinusoidal arrangements with the enhanced impact resistance of helical arrangements. This design delays penetration at higher loads, resulting in increased residual strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Insect and Arachnid Ecology and Behavior · Silk-based biomaterials and applications · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. An experimental study of the dynamic responses of carbon fiber reinforced polymer composite laminates subjected to ice impact10.1177/07316844211073762 ↗
2. Low velocity impact on CFRP plates with compressive preload: test and modelling10.1016/j.ijimpeng.2009.04.006 ↗
3. Enhanced composite plate impact damage detection and characterisation using X-Ray refraction and scattering contrast combined with ultrasonic imaging10.1016/j.compositesb.2019.107579 ↗
4. Effects of fiber properties on aerodynamic performance and structural sizing of composite aircraft wings10.1016/j.ast.2022.107565 ↗
5. Effect of matrix damage on compressive strength in the fiber direction for laminated composites10.1016/j.compositesa.2016.12.012 ↗
6. Low-velocity impact response and damage tolerance of hybrid biaxial/triaxial braided composite laminates10.1002/pc.27302 ↗
7. Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure10.1016/j.compstruct.2013.07.008 ↗
8. Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading10.1016/j.compscitech.2014.04.014 ↗
9. Effects of interply hybridization on the damage resistance and tolerance of composite laminates10.1016/j.compstruct.2013.09.037 ↗
10. Improved static and dynamic mechanical properties of multiscale bucky paper interleaved Kevlar fiber composites10.1016/j.carbon.2019.06.055 ↗
11. Shear wave filtering in naturally-occurring Bouligand structures10.1016/j.actbio.2015.04.039 ↗
12. Bio-inspired impact-resistant composites10.1016/j.actbio.2014.03.022 ↗
13. Bio-inspired design for enhanced damage tolerance of self-reinforced polypropylene/carbon fibre polypropylene hybrid composites10.1016/j.compositesa.2019.03.028 ↗
14. Stress and damage mitigation from oriented nanostructures within the radular teeth of cryptochiton stelleri10.1002/adfm.201401091 ↗
15. Revealing the mechanics of helicoidal composites through additive manufacturing and beetle developmental stage analysis
16. A natural energy absorbent polymer composite: the equine hoof wall10.1016/j.actbio.2019.04.003 ↗
17. The limiting layer of fish scales: structure and properties10.1016/j.actbio.2017.12.011 ↗
18. Biomechanics: deadly strike mechanism of a mantis shrimp-This shrimp packs a punch powerful enough to smash its prey's shell underwater10.1038/428819a ↗
19. Extreme impact and cavitation forces of a biological hammer: strike forces of the peacock mantis shrimp Odontodactylus scyllarus10.1242/jeb.01831 ↗
20. The Stomatopod dactyl club: a formidable damage-tolerant biological hammer10.1126/science.1218764 ↗
21. A sinusoidally architected helicoidal biocomposite10.1002/adma.201600786 ↗
22. Crashworthiness investigation of the bioinspired bi-directionally corrugated core sandwich panel under quasi-static crushing load10.1016/j.matdes.2017.09.040 ↗
23. Mechanical properties of a novel dactyl-inspired green-composite sandwich structures with basalt fiber10.1177/1099636219846646 ↗
24. Herringbone-Bouligand CFRP structures: a new tailorable damage-tolerant solution for damage containment and reduced delaminations10.1016/j.compscitech.2020.108047 ↗
25. Discontinuous fibrous Bouligand architecture enabling formidable fracture resistance with crack orientation insensitivity10.1073/pnas.2000639117 ↗
26. Study on impact resistance behaviors of a novel composite laminate with basalt fiber for helical-sinusoidal bionic structure of dactyl club of mantis shrimp10.1016/j.compositesb.2020.107976 ↗
27. Defense mechanism of bioinspired composites with sinusoidally periodic helicoidal fiber architectures10.1061/(ASCE)AS.1943-5525.0001450 ↗
28. Tough and strong cross-lamella design imparts multifunctionality to biomimetic nacre10.1021/acsnano.0c01511 ↗
29. Fatigue and damage analysis on aeronautical CFRP elements under tension and bending loads: two cases of study10.1016/j.ijfatigue.2021.106403 ↗
30. Static and dynamic bearing failure of carbon/epoxy composite joints10.1016/j.compstruct.2018.07.069 ↗
31. Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage10.1016/j.compscitech.2019.107684 ↗
32. Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability
33. Fast trap jaws and giant neurons in the ant odontomachus10.1126/science.262.5133.561 ↗
34. Descending pathways connecting the male-specific visual system of flies to the neck and flight motor
35. Spring and latch dynamics can act as control pathways in ultrafast systems10.1088/1748-3190/acaa7c ↗
36. Twisting cracks in Bouligand structures10.1016/j.jmbbm.2017.06.010 ↗
37. Mechanical adaptability of the Bouligand-type structure in natural dermal armour10.1038/ncomms3634 ↗
38. Structural biological materials: critical mechanics-materials connections10.1126/science.1220854 ↗
39. Effects of inter-ply angles on the failure mechanisms in bioinspired helicoidal laminates10.1016/j.compscitech.2018.07.017 ↗
40. Bio-inspired laminates of different material systems10.1115/1.4045280 ↗
41. Microscale simulation of adhesive and cohesive failure in rough interfaces10.1016/j.engfracmech.2017.02.026 ↗
42. Biomimetic laminated basalt fiber-reinforced composite with sinusoidally architected helicoidal structure integrating superior mechanical properties and microwave-transmissibility10.1016/j.compscitech.2022.109836 ↗
43. New developments in non-destructive controls of the composite materials and applications in manufacturing engineering10.1016/j.jmatprotec.2007.12.001 ↗
44. Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights
45. Layer-wise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography10.1080/13588265.2018.1511234 ↗
46. Mode i fracture along adhesively bonded sinusoidal interfaces10.1016/j.ijsolstr.2015.12.028 ↗
47. Analysis of bioinspired noninterlocking geometrically patterned interfaces under predominant mode I loading10.1016/j.jmbbm.2019.04.047 ↗