A general method to improve imprinting efficiency in surface protein imprinting by enhanced pre-assembly
Source abstract
Abstract
Surface protein-imprinted nanoparticles may replace the expensive and unstable antibodies in biomedical applications but still suffers from a low imprinting efficiency. A main reason may be the insufficient pre-assembly between monomers and template protein in surface imprinting using the conventional surface graft polymerization method. Increasing monomer concentrations enhances pre-assembly, but leads to agglomeration of the particles. To solve the dilemma, here an initiating system consisting of surface-immobilized glucose oxidase and horseradish peroxidase, glucose and acetylacetone was used to synthesize the imprinted coatings. No agglomeration occurs even at high monomer concentrations because of the localized polymerization. When surface imprinting of lysozyme over silica nanoparticles, both adsorption capacity and imprinting factor increase with increasing monomer concentration, because of the enhanced pre-assembly. This strategy was further combined with the "shape-memorable imprint cavity" strategy in which the conventional crosslinker is replaced with a peptide crosslinker capable of undergoing pH-induced helix-coil transition. The resulting surface lysozyme-imprinted silica nanoparticles exhibit high adsorption capacity, high imprinting factor, high selectivity, good reusability, easy and complete template removal under mild conditions, and fast rebinding kinetics. Surface imprinting of other proteins with high imprinting efficiency were also successfully carried out, demonstrating the generality of the strategy. STATEMENT OF SIGNIFICANCE: Surface protein-imprinted nanoparticles have emerged as promising artificial antibodies, but still suffering from low imprinting efficiency, primarily due to insufficient pre-assembly between functional monomers and template proteins. Increasing monomer concentrations enhances pre-assembly but causes particle agglomeration. Here the dilemma was solved by using an initiating system consisting of surface-immobilized glucose oxidase/horseradish peroxidase, glucose, and acetylacetone to achieve localized polymerization. Imprinting efficiency was significantly improved because of enhanced pre-assembly. This strategy was further combined with the "shape-memorable imprint cavity" strategy. Lysozyme-imprinted nanoparticles with high capacity (146.4 mg g-1), high imprinting factor (13.94), reusability, and fast rebinding kinetics was synthesized. Surface imprinting of other proteins with high imprinting efficiency were also successfully carried out, demonstrating the generality of the strategy.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical chemistry methods development · Advanced biosensing and bioanalysis techniques · Biosensors and Analytical Detection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Molecularly imprinted synthetic antibodies: from chemical design to biomedical applications
2. Protein-imprinted polymers: how far have “plastic antibodies” come?10.1016/j.biotechadv.2023.108220 ↗
3. Molecularly imprinted polymers as synthetic antibodies for protein recognition: the next generation10.1002/smll.202206453 ↗
4. Molecularly imprinted polymers10.1021/acs.chemrev.8b00171 ↗
5. Too large to fit? Recent developments in macromolecular imprinting10.1016/j.tibtech.2008.01.001 ↗
6. Challenges for the effective molecular imprinting of proteins10.1016/j.biomaterials.2011.01.007 ↗
7. Protein-imprinted materials: rational design, application and challenges10.1007/s00216-012-5840-y ↗
8. Critical review and perspective of macromolecularly imprinted polymers10.1016/j.actbio.2011.11.005 ↗
9. Protein-imprinted polymers: the shape of things to come?10.1021/acs.chemmater.7b01936 ↗
10. Molecularly imprinted polymers for capturing and sensing proteins: current progress and future implications10.1016/j.trac.2019.02.008 ↗
11. From 3d to 2d: a review of the molecular imprinting of proteins10.1002/bp060122g ↗
12. Selective protein capture by epitope imprinting10.1002/anie.200503760 ↗
13. Molecularly imprinted polymer nanogels for protein recognition: direct proof of specific binding sites by solution STD and waterLOGSY NMR spectroscopies10.1002/anie.202106507 ↗
14. Nanomaterials-based surface protein imprinted polymers: synthesis and medical applications10.1002/macp.202000222 ↗
15. Sol–gel process: the inorganic approach in protein imprinting10.1039/D0TB02941F ↗
16. Preparation of molecularly imprinted polymers specific to glycoproteins, glycans and monosaccharides via boronate affinity controllable–oriented surface imprinting10.1038/nprot.2017.015 ↗
17. Surface molecularly imprinted nanowire for protein specific recognition10.1039/b810248a ↗
18. Facile modification of protein-imprinted polydopamine coatings over nanoparticles with enhanced binding selectivity10.1016/j.cej.2019.123463 ↗
19. Design and preparation of self-driven bsa surface imprinted tubular carbon nanofibers and their specific adsorption performance10.1016/j.cej.2019.05.129 ↗
20. Imprinting of protein over silica nanoparticles via surface graft copolymerization using low monomer concentration10.1016/j.bios.2010.06.043 ↗
21. Enhanced lysozyme imprinting over nanoparticles functionalized with carboxyl groups for noncovalent template sorption10.1021/ac1029924 ↗
22. Enhanced surface imprinting of lysozyme over a new kind of magnetic chitosan submicrospheres10.1016/j.jcis.2014.10.059 ↗
23. Synthesis of uniformly sized molecularly imprinted polymer-coated silica nanoparticles for selective recognition and enrichment of lysozyme10.1039/c2jm32734a ↗
24. Fabrication of raspberry-like cytochrome C surface-imprinted nanoparticles based on MOF composites for high-performance protein separation10.1021/acsami.1c07107 ↗
25. Preparation of flower-like molecularly imprinted polymers based on metal coordination for selective extraction of hemoglobin10.1016/j.seppur.2024.126282 ↗
26. Bovine serum albumin surface imprinted polymer fabricated by surface grafting copolymerization on zinc oxide rods and its application for protein recognition10.1002/jssc.201500594 ↗
27. Preparation of lysozyme-imprinted mesoporous Zr-based metal-organic frameworks with remarkable specific recognition10.1016/j.talanta.2023.124896 ↗
28. Microgel coating of magnetic nanoparticles via bienzyme-mediated free-radical polymerization for colorimetric detection of glucose10.1039/C5NR05716G ↗
29. Oxidoreductase-initiated radical polymerizations to design hydrogels and micro/nanogels: mechanism, molding, and applications
30. Peptide-cross-linked protein-imprinted polymers: easy template removal and excellent imprinting effect10.31635/ccschem.019.20190030 ↗
31. Human serum albumin-imprinted polymers with high capacity and selectivity for abundant protein depletion10.1016/j.actbio.2021.03.010 ↗
32. Construction of shape memorable imprinted cavities for protein recognition using oligo-l-lysine-based peptide crosslinker10.1016/j.jcis.2021.03.123 ↗
33. Peptide-enhanced tough, resilient and adhesive eutectogels for highly reliable strain/pressure sensing under extreme conditions10.1038/s41467-022-34522-z ↗
34. Magnetic field-assisted fast assembly of microgel colloidal crystals10.1021/acs.langmuir.2c00297 ↗
35. Fabrication of hollow capsules based on hydrogen bonding10.1002/adma.200304315 ↗
36. Catalytically active protein coatings: toward enzymatic cascade reactions at the intercolloidal level10.1021/acscatal.6b03072 ↗
37. Fluorescent tpa@gqds probe for sensitive assay and quantitative imaging of hydroxyl radicals in living cells10.1021/acsami.7b16094 ↗
38. HRP-mediated polymerization forms tough nanocomposite hydrogels with high biocatalytic performance10.1039/c3cc44296a ↗
39. Peptide-crosslinked molecularly imprinted polymers for efficient separation of immunoglobulin g from human serum10.1039/D2BM01450E ↗
40. Molecularly imprinted polymer with high capacity and selectivity for separation of bovine serum albumin10.1021/acsapm.3c01370 ↗
41. Peptide-crosslinked igg-imprinted polymers for antibody capture and separation10.1016/j.eurpolymj.2023.112411 ↗
42. Molecularly imprinted polymers with shape-memorable imprint cavities for efficient separation of hemoglobin from blood10.1021/acs.biomac.2c01285 ↗
43. Molecularly imprinted polymer for selective insulin capture and separation10.1016/j.polymer.2024.127290 ↗
44. Metal coordination assisted thermo-sensitive magnetic imprinted microspheres for selective adsorption and efficient elution of proteins10.1016/j.colsurfa.2020.125981 ↗
45. Controllably prepared aptamer–molecularly imprinted polymer hybrid for high-specificity and high-affinity recognition of target proteins10.1021/acs.analchem.9b00465 ↗
46. Boronate-affinity glycan-oriented surface imprinting: a new strategy to mimic lectins for the recognition of an intact glycoprotein and its characteristic fragments10.1002/anie.201503066 ↗
47. Oriented immobilization of protein templates: a new trend in surface imprinting10.1021/acssensors.0c01634 ↗
48. Construction of specific and reversible nanoreceptors for proteins via sequential surface-imprinting strategy10.1021/acs.analchem.0c01366 ↗
49. Improving molecularly imprinted nanogels by pH modulation10.1039/C5RA16777A ↗
50. Molecularly imprinted polymers with DNA aptamer fragments as macromonomers10.1021/acsami.6b00461 ↗
51. Preparation and specific recognition of protein macromolecularly imprinted polyampholyte hydrogel10.1016/j.talanta.2018.08.084 ↗