Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants
Source abstract
Abstract
Laser-engineered net shaping (LENS), a commercial rapid prototyping (RP) process, was used to coat titanium with tricalcium phosphate (TCP) ceramics to improve bone cell-materials interactions. During LENS coating process, the Nd:YAG laser melts the top surface of Ti substrate in which calcium phosphate powder is fed to create a TCP-Ti composite layer. It was found that an increase in laser power and/or powder feed rate increases the thickness of the coating. However, coating thickness decreased with increasing laser scan speed. TCP coating showed columnar titanium grains at the substrate side of the coating and transitioned to equiaxed titanium grains at the outside. When the scan speed was reduced from 15 to 10mms(-1), coating hardness increased from 882+/-67 to 1049+/-112Hv due to an increase in the volume fraction of TCP in the coating. Coated surfaces showed uniformly distributed TCP particles and X-ray diffraction data confirmed the absence of any undesirable phases, while maintaining a high level of crystallinity. The effect of TCP coating on cell-material interaction was examined by culturing osteoprecursor cells (OPC1) on coated surfaces. The results indicated that TCP coating had good biocompatibility where OPC1 cells attached and proliferated on the coating surface. The coating also initiated cell differentiation, ECM formation and biomineralization.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Hydroxyapatite-coated prostheses in total hip and knee arthroplasty10.2106/00004623-200411000-00028 ↗
2. Improved bone anchorage of hydroxyapatite coated implants compared with tricalcium-phosphate coated implants in trabecular bone in dogs10.1016/S0142-9612(98)00216-6 ↗
3. Histological examination of beta-tricalcium phosphate graft in human femur10.1002/jbm.10380 ↗
4. The expression of bone matrix protein mrnas around beta-tcp particles implanted into bone10.1002/1097-4636(20001205)52:3<460::AID-JBM3>3.0.CO;2-U ↗
5. Effect of calcium phosphate coating characteristics on early post-operative bone tissue ingrowth10.1016/0142-9612(90)90073-Y ↗
6. Osteointegration of hydroxyapatite-coated and uncoated titanium screws in long-term ovariectomized sheep10.1016/S0142-9612(01)00213-7 ↗
7. An investigation of the effects of hydroxyapatite coatings on the fixation strength of cortical screws10.1016/j.medengphy.2004.10.006 ↗
8. Titanium-based bioactive materials10.1016/j.jeurceramsoc.2006.04.015 ↗
9. Hydroxyapatite coating by dipping method, and bone bonding strength10.1007/BF00154548 ↗
10. Morphological stability of hydroxyapatite precursor10.1016/S0167-577X(02)01112-6 ↗
11. Electrophoretic coating of hydroxyapatite on titanium implants10.1016/S0022-2860(01)00716-5 ↗
12. Osteoblast proliferation on neat and apatite-like calcium phosphate-coated titanium foam scaffolds10.1016/j.msec.2006.05.052 ↗
13. Coating of hydroxyapatite thin film by simultaneous vapor deposition10.1016/S0040-6090(00)01276-1 ↗
14. Pulsed laser deposition and its current research status in preparing hydroxyapatite thin films10.1016/j.apsusc.2005.02.127 ↗
15. In vivo evaluation of plasma sprayed hydroxyapatite coatings having different crystallinity10.1016/S0142-9612(03)00545-3 ↗
16. Intrinsic factors of apatite influencing its amorphization during plasma spray coating10.1016/0142-9612(95)91094-F ↗
17. Addressing processing problems associated with plasma spraying of hydroxyapatite coatings10.1016/0142-9612(96)82729-3 ↗
18. Laser treatment of plasma sprayed ha coating10.1016/S0921-5093(99)00049-0 ↗
19. A multi-textured calcium phosphate coating for hard tissue via laser surface engineering
20. Bioceramic coating of hydroxyapatite on titanium substrate with Nd-YAG laser10.1016/j.msec.2005.05.002 ↗
21. Microstructure of yttric calcium phosphate bioceramic coatings synthesized by laser cladding10.1016/j.apsusc.2006.08.036 ↗
22. In situ fabrication of bioceramic composite coatings by laser cladding10.1016/j.surfcoat.2005.07.076 ↗
23. Main characteristics of calcium phosphate coatings obtained by laser cladding10.1016/j.apsusc.2005.01.134 ↗
24. Production of calcium phosphate coatings on Ti6Al4V obtained by Nd:yttrium–aluminium–garnet laser cladding10.1063/1.1402975 ↗
25. Establishing an immortalized human osteoprecursor cell line: OPC110.1359/jbmr.1999.14.10.1721 ↗
26. Interaction of human osteoblasts with bioinert and bioactive ceramic substrates10.1002/jbm.a.30459 ↗
27. Heine · 1967
28. Preparation and characterization of in situ synthesized b4c particulate reinforced nickel composite coatings by laser cladding10.1016/j.surfcoat.2006.01.032 ↗
29. Fabrication of nickel composite coatings reinforced with tic particles by laser cladding10.1016/j.surfcoat.2003.09.062 ↗
30. Preparation and cell–materials interactions of plasma sprayed strontium-containing hydroxyapatite coating10.1016/j.surfcoat.2006.10.012 ↗
31. Cellular response to zinc-containing organoapatite: an in vitro study of proliferation, alkaline phosphatase activity and biomineralization10.1016/j.biomaterials.2005.01.043 ↗