journal article·2008-01

Superporous hydrogels for cartilage repair: Evaluation of the morphological and mechanical properties

Kara L. Spiller, Samuel J. Laurencin, Devon Charlton, Suzanne A. Maher, Anthony M. Lowman

Acta Biomaterialia· Volume 4· Issue 1
Publisher page

Abstract

Despite extensive research in the design of biomaterials for articular cartilage repair, there remains a need for the development of materials with the mechanical compliance to function synergistically with healthy cartilage, but porous enough to allow for tissue integration. In this study, superporous hydrogels of poly(vinyl alcohol) and poly(vinyl pyrrolidone) were prepared using a novel technique consisting of a double emulsion process. The hydrogel emulsions were physically cross-linked by freeze-thaw cycling. The hydrogels had a high degree of porosity, determined using environmental scanning electron microscopy, a technique superior to any method that involves dehydrating the samples. Increasing the volume of organic solvent increased porosity, due to cross-linking of the hydrogel solution around the droplets in the emulsion, leaving pores where the organic solvent was present. Poly(lactic-co-glyclic acid) microparticles formed and were embedded in the matrix. The mechanical properties, measured in confined creep and in unconfined, uniaxial compression, were similar to native articular cartilage. The permeability of the samples was unaffected by changing solvent content, despite changes in porosity. These materials are good candidates for tissue engineering of cartilage because they can mimic mature cartilage mechanically while providing a porous matrix through which cells can migrate and proliferate.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Osteoarthritis Treatment and Mechanisms · Bone Tissue Engineering Materials · Total Knee Arthroplasty Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Swelling and fibronectin accumulation in articular cartilage explants after cyclical impact10.1002/jor.1100140312 ↗
2. Biomechanical and structural characteristics of canine femoral and tibial cartilage10.1002/(SICI)1097-4636(1999)48:2<99::AID-JBM1>3.0.CO;2-N ↗
3. Symptomatic articular cartilage degeneration: the impact in the new millennium10.1097/00003086-200110001-00003 ↗
4. Articular cartilage Part II: degeneration and osteoarthrosis, repair, regeneration, and transplantation10.2106/00004623-199704000-00022 ↗
5. Scaffolds for articular cartilage repair10.1023/B:ABME.0000007788.41804.0d ↗
6. Porous scaffold design for tissue engineering10.1038/nmat1683 ↗
7. Repair of osteochondral defects with hyaluronan- and polyester-based scaffolds10.1016/j.joca.2004.12.016 ↗
8. Enhancing tissue integration in cartilage repair procedures10.1111/j.1469-7580.2006.00624.x ↗
9. Kroshwitz · 1989
10. Diffusion in musculoskeletal tissue engineering scaffolds: design issues related to porosity, permeability, architecture, and nutrient mixing10.1007/s10439-004-7825-2 ↗
11. Synthesis of superporous hydrogels: hydrogels with fast swelling and superabsorbent properties10.1002/(SICI)1097-4636(199901)44:1<53::AID-JBM6>3.0.CO;2-W ↗
12. Nondegradable hydrogels for the treatment of focal cartilage defects10.1002/jbm.a.31255 ↗
13. Friction and wear behavior of poly(vinyl alcohol)/poly(vinyl pyrrolidone) hydrogels for articular cartilage replacement10.1002/jbm.a.31238 ↗
14. Functional compressive mechanics of a PVA/PVP nucleus pulposus replacement10.1016/j.biomaterials.2005.06.003 ↗
15. Cryotropic gelation of poly(vinyl alcohol) solutions10.1070/RC1998v067n07ABEH000399 ↗
16. The effect of dehydration history on PVA/PVP hydrogels for nucleus pulposus replacement10.1002/jbm.b.20023 ↗
17. Mechanical properties of a novel PVA hydrogel in shear and unconfined compression10.1016/S0142-9612(00)00242-8 ↗
18. Poly(vinyl alcohol) hydrogel as a biocompatible viscoelastic mimetic for articular cartilage10.1021/bp060181u ↗
19. Rasband · 1997-2006
20. Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review10.1016/S0142-9612(00)00126-5 ↗
21. Hydrogels
22. Comparison of the equilibrium response of articular cartilage in unconfined compression, confined compression, and indentation10.1016/S0021-9290(02)00052-0 ↗
23. Optical and mechanical determination of Poisson’s ratio of adult bovine humeral articular cartilage10.1016/S0021-9290(96)00133-9 ↗
24. Biphasic creep and stress relaxation of articular cartilage: theory and experiments10.1115/1.3138202 ↗
25. Novel porous gelatin scaffolds by overrun/particle leaching process for tissue engineering applications10.1002/jbm.b.30553 ↗
26. Effect of micro- and macroporosity of bone substitutes on their mechanical properties and cellular response10.1023/B:JMSM.0000004006.90399.b4 ↗
27. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
28. Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique10.1016/S0142-9612(02)00562-8 ↗
29. Substrate porosity enhances chondrocyte attachment, spreading, and cartilage tissue formation in vitro10.1002/jbm.a.30746 ↗
30. Articular cartilage repair: are the intrinsic biological constraints undermining this process insuperable?10.1053/joca.1998.0159 ↗
31. Measurement of pore size and porosity of tissue scaffolds10.1520/JAI11510 ↗
32. Nondestructive technique for the characterization of the pore size distribution of soft porous constructs for tissue engineering10.1021/la051762g ↗
33. Comparison of the equilibrium response of articular cartilage in unconfined compression, confined compression and indentation10.1016/S0021-9290(02)00052-0 ↗
34. Factors determining hydrogel permeability10.1111/j.1749-6632.1997.tb52194.x ↗
35. The biphasic poroviscoelastic behavior of articular cartilage: role of the surface zone in governing the compressive behavior10.1016/0021-9290(93)90019-B ↗
36. Articular cartilage biomechanics
37. Functional tissue engineering of chondral and osteochondral constructs
38. Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds10.1002/jbm.b.30229 ↗
39. Fluid transport and mechanical properties of articular cartilage: a review10.1016/0021-9290(84)90031-9 ↗
40. Permeability of musculoskeletal tissues and scaffolding materials: experimental results and theoretical predictions10.1615/CritRevBiomedEng.v31.i12.10 ↗
41. Fluid conductance of cancellous bone graft as a predictor for graft–host interface healing10.1016/0021-9290(95)00010-0 ↗