journal article·2010-07

Preparation of bioactive Ti metal surface enriched with calcium ions by chemical treatment

Takashi Kizuki, Hiroaki Takadama, Tomiharu Matsushita, Takashi Nakamura, Tadashi Kokubo

Acta Biomaterialia· Volume 6· Issue 7
Publisher page

Abstract

A calcium solution treatment was applied to a NaOH-treated titanium metal to give it bioactivity, scratch resistance and moisture resistance. The titanium metal was soaked in a 5 M NaOH solution and then a 100 mM CaCl(2) solution to incorporate Ca(2+) ions into the titanium metal surface by ion exchange. This treated titanium metal was subsequently heated at 600 degrees C and soaked in hot water at 80 degrees C. The NaOH treatment incorporated approximately 5 at.% Na(+) ions into the Ti metal surface. These Na(+) ions were completely replaced by Ca(2+) ions by the CaCl(2) treatment. The number of Ca(2+) ions remained even after subsequent heat and water treatments. Although the NaOH-CaCl(2)-treated titanium metal showed slightly higher apatite-forming ability in a simulated body fluid than the NaOH-treated titanium metal, it lost its apatite-forming ability during the heat treatment. However, subsequent water or autoclave treatment restored the apatite-forming ability of the NaOH-CaCl(2)-heat-treated titanium metal. Although the apatite-forming ability of the NaOH-heat-treated titanium metal decreased dramatically when it was kept at high humidity, that of NaOH-CaCl(2)-heat-water-treated titanium metal was maintained even in the humid environment. The heat treatment increased the critical scratch resistance of the surface layer of the NaOH-CaCl(2)-treated titanium metal remarkably, and it did not deteriorate on subsequent water treatment.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Laser-Ablation Synthesis of Nanoparticles

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Spontaneous formation of bonelike apatite layer on chemically treated titanium metals10.1111/j.1151-2916.1996.tb08561.x ↗
2. Preparation of bioactive Ti and alloys via simple chemical surface treatment10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B ↗
3. Effect of heat treatment on apatite-forming ability of Ti metal induced by alkali treatment10.1023/A:1018524731409 ↗
4. Bonding of chemically treated titanium implants to bone10.1002/(SICI)1097-4636(199711)37:2<267::AID-JBM17>3.0.CO;2-B ↗
5. Biology of alkali- and heat-treated titanium implants10.1002/jbm.a.10540 ↗
6. A new cementless total hip arthroplasty with bioactive titanium porous-coating by alkaline and heat treatment: average 4.8-year results
7. Mechanism of apatite formation on CaO–SiO2–P2O5 glasses in a simulated body fluid10.1016/S0022-3093(05)80556-3 ↗
8. Effects of calcium ion implantation on human bone cell interaction with titanium10.1016/j.biomaterials.2004.11.044 ↗
9. The oxidation of calcium implanted titanium in water: a depth profiling study10.1016/j.apsusc.2006.09.006 ↗
10. The significance of the surface properties of oxidized titanium to the bone response: special emphasis on potential biochemical bonding of oxidized titanium implant10.1016/S0142-9612(03)00261-8 ↗
11. Increased bone contact to a calcium-incorporated oxidized commercially pure titanium implant: an in-vivo study in rabbits10.1016/j.ijom.2008.01.020 ↗
12. Apatite induction on Ca-containing Titania formation by micro-arc oxidation10.1111/j.1551-2916.2005.00476.x ↗
13. Effects of hydrothermal treatment with CaCl2 solution on surface property and cell response of titanium implants10.1007/s10856-005-4753-0 ↗
14. Effects of calcium ion incorporation on bone healing of Ti6Al4V alloy implants in rabbit tibiae10.1016/j.biomaterials.2007.04.007 ↗
15. Chemical–hydrothermal combined surface modification of titanium for improvement of osteointegration10.1016/j.msec.2008.09.002 ↗
16. Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications10.1016/j.actbio.2009.01.015 ↗
17. Formation of hydroxyapatite layer on bioactive Ti and Ti–6Al–4V by simple chemical technique10.1007/s10856-007-3285-1 ↗
18. How useful is SBF in predicting in vivo bone bioactivity10.1016/j.biomaterials.2006.01.017 ↗
19. A study on the structure and thermal stability of titanate nanotubes as a function of sodium content10.1016/j.solidstatesciences.2006.02.039 ↗
20. Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide10.1021/jp055687u ↗
21. Review of Titania nanotubes synthesized via the hydrothermal treatment: fabrication, modification, and application10.1016/j.seppur.2007.07.017 ↗
22. Kingely WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed. New York: John Wiley & Sons Ltd; 1976, p. 262.
23. Surface potential change in bioactive titanium metal during the process of apatite formation in simulated body fluid10.1002/jbm.a.20039 ↗