journal article·2008-05

Effect of increasing titanium dioxide content on bulk and surface properties of phosphate-based glasses

Ensanya Ali Abou Neel, Wojciech Chrzanowski, Jonathan Campbell Knowles

Acta Biomaterialia· Volume 4· Issue 3
Publisher page

Abstract

There is an ingoing need for more effective and less costly bone substitute materials. In a previous study, addition of titanium dioxide (TiO2) up to 5 mol.% was shown to be effective in controlling glass degradation, and this was reflected in enhanced gene expression and bone-forming capacity of phosphate-based glasses. In the current study, incorporation of the maximum possible amount of TiO2 has been attempted in order to further improve the biological response of these glasses. This report describes the physical, surface properties and short-term response of an osteoblast cell line (MG63) on phosphate glasses doped with the maximum possible TiO2 content. The results showed that a maximum of 15 mol.% TiO2 can be incorporated into the ternary formulations while maintaining their amorphous nature; such incorporation was associated with a significant increase in density and glass transition temperature. On crystallization, X-ray diffraction analysis showed the presence of TiP2O7 and NaCa(PO3)3 as the main phases for all TiO2-containing glasses, while beta-(CaP2O6) was only detected for 10 and 15 mol.% TiO2 glasses. The degradation rate, however, was significantly reduced by an order of magnitude with incorporation of 10 and 15 mol.% TiO2, and this was reflected in the released ions. This change in the bulk properties, produced with TiO2 incorporation, was also associated with a significant change in the hydrophilicity and surface reactivity of these glasses. Even though the addition of TiO2 reduced the hydrophilicity and the surface free energy of these glasses compared to TiO2 free composition, TiO2-containing glasses still have a significantly reactive surface layer compared to Thermanox. Generally glasses with 5-15 mol.% TiO2 supported MG63 cell growth and maintained high cell viability for up to 7 days culture, which is comparable to Thermanox. Based on the results obtained from this study, TiO2-containing phosphate glasses are promising substrates for bone tissue engineering applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Bone tissue engineering: hope vs. hype10.1006/bbrc.2002.6519 ↗
2. Bone graft substitutes10.1053/j.otpr.2003.09.003 ↗
3. Bioactive evaluation of 45S5 bioactive glass fibres and preliminary study of human osteoblast attachment10.1023/B:JMSM.0000032821.32577.fc ↗
4. Effect of pH and ionic strength on the reactivity of bioglass® 45S510.1016/j.biomaterials.2004.07.009 ↗
5. Properties and structure of sodium-iron phosphate glasses10.1016/S0022-3093(97)00022-7 ↗
6. Effect of melting temperature and time on iron valence and crystallization of iron phosphate glasses10.1016/S0022-3093(99)00304-X ↗
7. Processing, characterisation and biocompatibility of iron-phosphate glass fibres for tissue engineering10.1016/j.biomaterials.2003.10.013 ↗
8. Effect of iron on the surface, degradation and ion release properties of phosphate-based glass fibres10.1016/j.actbio.2005.05.001 ↗
9. Characterisation of antimicrobial copper releasing degradable phosphate glass fibres10.1016/j.biomaterials.2004.07.024 ↗
10. Craniofacial muscle engineering using a 3-dimensional glass fibre constructs10.1016/j.biomaterials.2004.04.049 ↗
11. Cellular response to calcium phosphate glasses with controlled solubility10.1002/jbm.a.20014 ↗
12. Physicochemical studies of phosphate based P2O5–Na2O–CaO–TiO2 glasses for biomedical applications10.1016/j.jnoncrysol.2006.08.047 ↗
13. In vitro bioactivity and gene expression by cells cultured on titanium dioxide doped phosphate-based glasses10.1016/j.biomaterials.2007.03.018 ↗
14. Abou Neel EA, Knowles JC. Physical and biocompatibility studies of novel titanium dioxide doped phosphate-based glasses for bone tissue engineering applications. J Mater Sci Mater Med 2007; DOI 10.1007/s10856-007-3079-5.10.1007/s10856-007-3079-5 ↗
15. Effect of glass composition on the degradation properties and ion release characteristics of phosphate glass–polycaprolactone composites10.1016/j.biomaterials.2004.07.016 ↗
16. Fabrication and in vitro characterisation of porous biodegradable composites based on phosphate glasses and oligolactide containing-polymer networks10.1002/jbm.a.30902 ↗
17. The use of controlled-release glass for the controlled delivery of bioactive materials10.1042/bst0130516 ↗
18. Antibacterial effect of silver-doped phosphate-based glasses10.1002/jbm.a.30808 ↗
19. Synthesis, degradation, and in vitro cell responses of sodium phosphate glasses for craniofacial bone repair10.1002/jbm.10020 ↗
20. Long-term craniofacial osteoblast culture on a sodium phosphate and a calcium/sodium phosphate glass10.1002/jbm.a.10574 ↗
21. Soluble phosphate glasses: in vitro studies using human cells of hard and soft tissue origin10.1016/j.biomaterials.2003.08.054 ↗
22. Development of bioabsorbable glass fibres10.1016/0142-9612(94)90091-4 ↗
23. Lead borophosphate glasses doped with titanium dioxide10.1016/S0022-3093(03)00380-6 ↗
24. Real-time dissolution measurement of sized and unsized calcium phosphate glass fibres10.1002/(SICI)1097-4636(1999)48:6<833::AID-JBM11>3.0.CO;2-# ↗
25. Franks K. The structure and properties of soluble phosphate based glasses. PhD thesis, University of London; 2000.
26. Spectroscopic studies of the structure of titanophosphate and calcium titanophosphate glasses
27. Synthesis of two-component injectable polyurethanes for bone tissue engineering10.1016/j.biomaterials.2006.08.026 ↗
28. Specific proteins mediate enhanced osteoblast adhesion on nanophase ceramics10.1002/1097-4636(20000905)51:3<475::AID-JBM23>3.0.CO;2-9 ↗
29. The modern theory of contact angles and the hydrogen bond components of surface energies
30. Attractive forces at interfaces10.1021/ie50660a008 ↗
31. Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces10.1021/j100808a524 ↗
32. Estimation of surface free energy of polymers10.1002/app.1969.070130815 ↗
33. Wetting behaviour of bioactive glass surfaces by poly (α-hydroxyacids) melts interaction between Bioglass® and biodegradable polymers
34. Wu · 1982
35. Corrosion resistance and biocompatibility of a new porous surface for titanium implants10.1111/j.1600-0722.2005.00247.x ↗
36. Promising in vitro performance of a new nickel-free stainless steel10.1007/s10856-006-7313-3 ↗
37. In vitro response of primary rat osteoblasts to titania/hydroxyapatite coatings compared with transformed human osteoblast-like cells10.1023/A:1016183326864 ↗
38. Correlation between substratum roughness and wettability cell adhesion and cell migration10.1002/(SICI)1097-4636(199707)36:1<99::AID-JBM12>3.0.CO;2-E ↗
39. Studies on the biocompatibility of materials: Fibroblast reorganization of substratum-bound fibronectin on surfaces varying in wettability10.1002/(SICI)1097-4636(199603)30:3<385::AID-JBM13>3.0.CO;2-J ↗
40. Effect of hydroxyapatite coating crystallinity on the biosolubility cell attachment efficiency and proliferation in vitro10.1016/S0142-9612(98)00254-3 ↗
41. Titanium dioxide (TiO2) nanoparticles filled poly (d, l lactid acid) (PDLLA) matrix composite for bone tissue engineering10.1007/s10856-006-0062-5 ↗