journal article·2008-07

Porous scaffold of gelatin–starch with nanohydroxyapatite composite processed via novel microwave vacuum drying

Jaya Sundaram, Timothy D. Durance, Rizhi Wang

Acta Biomaterialia· Volume 4· Issue 4
Publisher page

Abstract

Hydroxyapatite (HA) is a fundamental mineral-based biomaterial, used for preparing composites for bone repair and regeneration. Gelatin blended with starch results in scaffold composites with enhanced mechanical properties. A gelatin-starch blend reinforced with HA nanocrystals (nHA) gave biocompatible composites with enhanced mechanical properties. In this study, a porous scaffold of gelatin-starch-nHA composites was fabricated through microwave vacuum drying and crosslinking using trisodium citrate. Three different composite scaffolds were prepared at three different percentages of nHA: 20%, 30% and 40%. The microstructures and compositions of the composites were analyzed. Within the porous structure, the nHA crystals were observed to precipitate. The interaction between the gelatin-starch network film and nHA crystalline material was studied using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis (XRD). XRD reflections showed that there are two different minerals present in the scaffold composite. There were strong reflection peaks close to the 26 degrees and 32 degrees 2theta angles of HA, and close to the 8 degrees and 49 degrees 2theta angles for sodium citrate minerals. The FTIR result suggested that carboxyl groups, C=O and amino groups play crucial roles in HA formation on the surface of a gelatin network.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Collagen: Extraction and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Biodegradable drug delivery system for the treatment of bone infection and repair10.1023/A:1008995926566 ↗
2. Preparation and histological evaluation of biomimetic three-dimensional hydroxyapatite/chitosan–gelatin network composite scaffolds10.1016/S0142-9612(02)00077-7 ↗
3. Laminated three-dimensional biodegradable foams for use in tissue engineering10.1016/0142-9612(93)90049-8 ↗
4. Novel approach to fabricate porous sponges of poly(d,l-lactic-co-glycolic acid) without the use of organic solvents10.1016/0142-9612(96)87284-X ↗
5. Tissue engineering scaffolds using superstructures10.1016/0142-9612(96)85753-X ↗
6. Word · 1977
7. Development of a calcium phosphate–gelatin composite as a bone substitute and its use in drug release10.1016/S0142-9612(98)00199-9 ↗
8. Preparation of hydroxyapatite–gelatin nanocomposite10.1016/S0142-9612(03)00115-7 ↗
9. Crystallographic study of hydroxyapatite bioceramics derived from various sources10.1021/cg034227s ↗
10. In vitro preparation and ellipsometric characterization of thin blood plasma clot films on silicon10.1016/S0142-9612(00)00359-8 ↗
11. Preparation and characterization of nano-sized hydroxyapatite powders produced in a radio frequency (RF) thermal plasma10.1016/j.msea.2003.12.040 ↗
12. Modulation of nano-hydroxyapatite size via formation on chitosan–gelatin network film in situ10.1016/j.biomaterials.2006.09.042 ↗
13. Brown · 1994
14. Characterisation of two biodegradable polymers of potential application within the biomedical field10.1007/BF00134318 ↗
15. Mechanical behavior of injection-molded starch-based polymers10.1002/(SICI)1099-1581(199610)7:10<784::AID-PAT585>3.0.CO;2-1 ↗
16. Processing and in vitro degradation of starch/EVOH thermoplastic blends10.1002/(SICI)1097-0126(199708)43:4<347::AID-PI764>3.0.CO;2-C ↗
17. Malafaya PB, Gallardo A, Reis RL, San Roman J. New porous starch-based polymeric drug delivery systems for arthritis and rheumatism treatment. In: Proceedings of the 15th European conference on biomaterials; 1999. p. 325.
18. Improvement of the mechanical properties of hydroxylapatite reinforced starch based polymers through processing
19. A new approach based on injection moulding to produce biodegradable starch-based polymeric scaffolds: morphology, mechanical and degradation behavior10.1016/S0142-9612(00)00211-8 ↗
20. New partially degradable and bioactive acrylic bone cements based on starch blends and ceramic fillers10.1016/S0142-9612(01)00315-5 ↗
21. Polylactide macroporous biodegradable implants for cell transplantation. 2. Preparation of polylactide foams by liquid–liquid phase separation.10.1002/(SICI)1097-4636(199604)30:4<449::AID-JBM3>3.0.CO;2-P ↗
22. Freeze drying of cardiac valves in preparation for cellular repopulation10.1006/cryo.1996.1982 ↗
23. Hydroxyapatite and gelatin composite foams processed via novel freeze-drying and crosslinking for use as temporary hard tissue scaffolds
24. Collagen based wound dressings: control of the pore structure and morphology10.1002/jbm.820200811 ↗
25. Basic aspects and future trends in the freeze-drying of pharmaceuticals
26. Quantization of the area of overlap between second-derivative amide I infrared spectra to determine the structural similarity of a protein in different states10.1021/js950332f ↗
27. Long-term stabilization of biologicals10.1038/nbt0394-253 ↗
28. Evaluation of drying technologies for retention of physical quality and antioxidants in asparagus (Asparagus officinalis L.)10.1016/S0023-6438(03)00046-X ↗
29. Effects of excipients on the crystallization of pharmaceutical compounds during lyophilization
30. Preparation and characterization of freeze dried chitosan/poly(ethylene oxide) hydrogels for site-specific antibiotic delivery in the stomach10.1023/A:1016054306763 ↗
31. Energy consumption, density and rehydration rate of vacuum microwave and hot air convection dehydrated tomatoes10.1111/j.1365-2621.2002.tb09529.x ↗
32. Combined microwave vacuum drying
33. Microwave vacuum drying kinetics of carrot slices10.1016/j.jfoodeng.2004.01.008 ↗
34. Jaya S, Durance TD. Influence of processing methods on mechanical and structural characteristics of vacuum microwave dried biopolymer foams. Food Bioprod Process, Trans IChem E: Pt C 2007;85(C3):1–9.10.1205/fbp07012 ↗
35. Durance TD, Sundaram J, Ressing M. Method for producing hydrocolloid sponges and foams. PCT/CA2005/001192; 2005.
36. Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo10.1023/A:1008973120918 ↗
37. Preparation of porous scaffolds in bone tissue engineering
38. Recombinant human-like collagen directed growth of hydroxyapatite nanocrystals10.1016/j.jcrysgro.2006.03.006 ↗
39. Change in the morphology of hydroxyapatite nanocrystals in the presence of bioaffinitive polymeric species under the application of electrical field10.1016/j.stam.2005.11.022 ↗
40. Biomimetic formation of hydroxyapatite/collagen matrix composite10.1002/adem.200500220 ↗