journal article·2009-06Open access

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications

Xiao-Bo Chen, Yun-Cang Li, Johan Du Plessis, Peter D. Hodgson, Cui’e Wen

Acta Biomaterialia· Volume 5· Issue 5

Abstract

In the present study, the influence of calcium ion deposition on the apatite-inducing ability of porous titanium (Ti) was investigated in a modified simulated body fluid (m-SBF). Calcium hydroxide (Ca(OH)(2)) solutions with five degrees of saturation were used to hydrothermally deposit Ca ions on porous Ti with a porosity of 80%. Apatite-inducing ability of the Ca-ion-deposited porous Ti was evaluated by soaking them in m-SBF for up to 14 days. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) confirmed that a thin layer of calcium titanate (CaTiO(3))/calcium oxide (CaO) mixture with a nanostructured porous network was produced on porous Ti substrates after hydrothermal treatment at 200 degrees C for 8 h. X-ray photoelectron spectroscopy results demonstrated that the content of the Ca ions deposited on Ti and the thickness of the CaTiO(3)/CaO layer increased with increasing saturation degree of the Ca(OH)(2) solution. The thickest (over 10 nm) CaTiO(3)/CaO layer with the highest Ca content was achieved on the Ti treated in an oversaturated Ca(OH)(2) solution (0.2 M). SEM, XRD, transmission electron microscopy and Fourier transformed infrared spectroscopy analysis indicated that the porous Ti samples deposited with the highest content of Ca ions exhibited the best apatite-inducing ability, producing a dense and complete carbonated apatite coating after a 14 day soaking in m-SBF. The present study illustrated the validity of using Ca ion deposition as a pre-treatment to endow desirable apatite-inducing ability of porous Ti for bone tissue engineering applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Titanium alloys in total joint replacement–a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. Brunette · 2001
3. The effects of metal plates on post-traumatic remodelling and bone mass10.1302/0301-620X.65B1.6822605 ↗
4. Processing of biocompatible porous Ti and Mg10.1016/S1359-6462(01)01132-0 ↗
5. Novel titanium foam for bone tissue engineering10.1557/JMR.2002.0382 ↗
6. Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti–18Nb–4Sn alloy for biomedical applications10.1016/j.actbio.2008.04.022 ↗
7. Gibson · 1997
8. Interface mechanics of porous titanium implants10.1002/jbm.820150111 ↗
9. A calcium phosphate formation within sol–gel-prepared titania in vitro and in vivo10.1002/jbm.820271205 ↗
10. Hydroxyapatite/titania sol–gel coatings on titanium–zirconium alloy for biomedical applications10.1016/j.actbio.2006.10.004 ↗
11. Bioactivity of titanium treated with hydrogen peroxide solutions containing metal chlorides10.1002/(SICI)1097-4636(199704)35:1<39::AID-JBM5>3.0.CO;2-N ↗
12. Spontaneous formation of bonelike apatite layer on chemically treated titanium metals10.1111/j.1151-2916.1996.tb08561.x ↗
13. Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid10.1002/bit.21900 ↗
14. Preparation of bioactive Ti and its alloys via simple chemical surface treatment10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B ↗
15. Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids10.1016/j.msec.2008.06.004 ↗
16. Fast precipitation of calcium phosphate layers on titanium induced by simple chemical treatments10.1016/S0142-9612(97)82297-1 ↗
17. Effect of water treatment on the apatite-forming ability of NaOH-treated titanium metal10.1002/jbm.10304 ↗
18. Bioactive titanium: effect of sodium removal on the bone-bonding ability of bioactive titanium prepared by alkali and heat treatment10.1002/1097-4636(20010915)56:4<562::AID-JBM1128>3.0.CO;2-M ↗
19. Lin JG, Li YC, Wong C, Hodgson PD, Wen CE. Degradation of the strength of porous titanium after alkali and heat treatment for biomedical applications (submitted for publication).
20. The order of calcium and phosphate ion deposition on chemically treated titanium surfaces soaked in aqueous solution10.1002/(SICI)1097-4636(199911)47:2<213::AID-JBM11>3.0.CO;2-C ↗
21. X-ray photoelectron spectroscopy of calcium-ion-implanted titanium10.1016/0368-2048(93)80032-H ↗
22. Calcium phosphate precipitation on calcium-ion-implanted titanium in electrolyte
23. Hydrothermal modification of titanium surface in calcium solutions10.1016/S0142-9612(01)00361-1 ↗
24. Evaluation of calcium phosphate as apatite growth promoter10.1002/jbm.a.30447 ↗
26. Biomimetic apatite formation on chemically treated titanium10.1016/j.biomaterials.2003.08.009 ↗
27. Design of bioactive bone substitutes based on biomineralization process10.1016/j.msec.2005.01.002 ↗
28. Bioactivity of titanium following sodium plasma immersion ion implantation and deposition10.1016/j.biomaterials.2005.02.006 ↗
29. Effects of a novel calcium titanate coating on the osseointegration of blasted endosseous implants in rabbit tibiae10.1111/j.1600-0501.2006.01323.x ↗
30. Formation of hydroxyapatite layer on bioactive Ti and Ti–6Al–4V by simple chemical technique10.1007/s10856-007-3285-1 ↗
31. Surface modification of titanium in calcium-ion-containing solutions10.1002/(SICI)1097-4636(19970305)34:3<273::AID-JBM1>3.0.CO;2-H ↗
32. TEM study of calcium phosphate precipitation on bioactive titanium surfaces10.1016/j.biomaterials.2003.08.028 ↗
33. A comparative study of electrochemical deposition and biomimetic deposition of calcium phosphate on porous titanium10.1016/j.biomaterials.2004.08.016 ↗
34. X-ray photoelectron spectroscopy (XPS) studies of clean and hydrated TiO2 (rutile) surfaces10.1016/0009-2614(79)87231-0 ↗
35. The role of hydrated silica, titania, and alumina in inducing apatite on implants10.1002/jbm.820280103 ↗
36. Effect of hot water and heat treatment on the apatite-forming ability of titania films formed on titanium metal via anodic oxidation in acetic acid solutions10.1007/s10856-007-3314-0 ↗
37. Crystal phase control for titanium dioxide films by direct deposition in aqueous solutions10.1021/cm010559d ↗
38. Formation of BaTiO3 and PbTiO3 thin films under mild hydrothermal conditions
39. Nucleation and growth of hydroxyapatite on titanium pretreated in NaOH solution: experiments and thermodynamic explanation10.1002/(SICI)1097-4636(19990915)46:4<441::AID-JBM1>3.0.CO;2-9 ↗
40. Gentamicin sulfate attachment and release from anodized Ti–6Al–4V orthopedic materials10.1002/jbm.820270708 ↗
41. Cluster growth model for hydroxyapatite10.1021/cm980062c ↗
42. Effect of carbonate content and buffer type on calcium phosphate formation in SBF solutions10.1007/s10856-006-9680-1 ↗
43. TEM–EDX study of mechanism of bonelike apatite formation on bioactive titanium metal in simulated body fluid10.1002/1097-4636(20011205)57:3<441::AID-JBM1187>3.0.CO;2-B ↗
44. Bonelike hydroxyapatite induction by a gel-derived titania on a titanium substrate10.1111/j.1151-2916.1994.tb05407.x ↗
45. Nucleation and growth of calcium phosphate on amine-, carboxyl- and hydroxyl-silane self-assembled monolayers10.1016/j.biomaterials.2005.06.017 ↗
46. Oriented growth of hydroxyapatite on (0001) textured titanium with functionalized self-assembled silane monolayer as template10.1039/a801384e ↗
47. Hunter · 1988
48. Bonding strength of bonelike apatite layer to Ti metal substrate10.1002/(SICI)1097-4636(199722)38:2<121::AID-JBM6>3.0.CO;2-S ↗
49. Organic–inorganic hybrid materials: from simple coordination polymers to organodiamine-templated molybdenum oxides10.1002/(SICI)1521-3773(19990917)38:18<2638::AID-ANIE2638>3.0.CO;2-4 ↗
50. New materials in hydrothermal synthesis10.1021/ar0000105 ↗