Towards long-lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding
Source abstract
Abstract
Antibacterial surface modification of biomedical materials has evolved as a potentially effective method for preventing bacterial proliferation on the surfaces of devices. However, thin antibacterial coatings or modified layers can be easily worn down when interacting with other surfaces in relative motion, thus leading to a low durability of the antibacterial surface. To this end, novel biomaterial surfaces with antibacterial Ag agents and a wear-resistant S-phase have been generated on stainless steel by duplex plasma silvering-nitriding techniques for application to load-bearing medical devices. The chemical composition, microstructure, surface topography, roughness and wettability of SS surfaces were characterised using glow discharge optical emission spectroscopy, energy-dispersive spectroscopy/wavelength dispersive spectrometry (WDS), X-ray diffraction, atomic force microscopy and a contact angle goniometer. Optimal surface design for high antimicrobial activity and prolonged durability has been achieved, as evidenced by rapid bacterial killing rates (within 6h), an ultra hard matrix (875 ± 25 Hv), high load-bearing capacity (critical load 37 N) and excellent wear resistance (wear rate 4.9 × 10⁻⁶ mm³ m⁻¹). Ag embedded in the hard substrate of fcc compounds M(4)N (M=Fe, Cr, Ag, etc.) and the expanded fcc nitrogen S-phase shows deep infiltration of 6 ± 1 μm, and provides bactericidal activity against both Gram-negative Escherichia coli NCTC 10418 and Gram-positive Staphylococcus epidermidis NCTC 11047 of over 97% and 90%, respectively, within 6h. The presence of silver in the surface before and after scratching under a progressive load applied up to 60 N using a diamond stylus was confirmed by WDS.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Managing hospital infection control for cost-effectiveness: a strategy for reducing infectious complications10.1016/S0001-2092(07)65080-7 ↗
2. Costs of hospital-acquired methicillin-resistant Staphylococcus aureus (MRSA) and its control10.1016/j.ijantimicag.2006.09.001 ↗
3. Potential use of copper surfaces to reduce survival of epidemic meticillin-resistant Staphylococcus aureus in the healthcare environment10.1016/j.jhin.2005.12.008 ↗
4. Adhesion of bacteria to stainless steel and silver-coated orthopedic external fixation pins10.1002/(SICI)1097-4636(19970905)36:3<325::AID-JBM7>3.0.CO;2-G ↗
5. Surface modification of medical metals by ion implantation of silver and copper10.1016/j.vacuum.2006.12.011 ↗
6. Antimicrobial polyethylene with controlled copper release10.1002/jbm.a.31436 ↗
7. Xu · 1988
8. Double glow plasma surface alloying and plasma nitriding10.1016/j.surfcoat.2006.07.187 ↗
9. A novel plasma surface metallurgy: Xu-Tec process10.1016/0257-8972(90)90045-E ↗
10. S-phase surface engineering of Fe–Cr, Co–Cr and Ni–Cr alloys10.1179/095066009X12572530170589 ↗
11. Buhagiar J, Dong H. S-phase in stainless steels: an overview. In: Sudarshan TS, Jeandin M, editors. Surface modification technologies XXI. Valardocs; 2007. p. 509–518.
12. Microstructural characterisation of a plasma carburised low carbon CoCr alloy10.1179/174329407X161564 ↗
13. On the fundamental mechanisms of active screen plasma nitriding10.1016/j.vacuum.2009.07.002 ↗
14. Background and evidence leading to the establishment of the JIS standard for antimicrobial products10.4265/bio.11.135 ↗
15. Bacterial adherence to biomaterials and tissue. The significance of its role in clinical sepsis10.2106/00004623-198567020-00014 ↗
16. Adherence to stainless steel by foodborne microorganisms during growth in model food systems10.1016/S0168-1605(97)00071-8 ↗
17. The physical and antibacterial properties of argentine-doped TiO2 film on stainless steel substrate
18. In vitro biocompatibility and bacterial adhesion of physico-chemically modified Ti6Al4V surface by means of UV irradiation10.1016/j.actbio.2008.07.028 ↗
19. The effect of surface topography on the retention of microorganisms10.1205/fbp06035 ↗
20. High nitrogen stainless steel as a preferred substratum for bacteria and other microfouling organisms10.2355/isijinternational.44.858 ↗
21. Antimicrobial activities of silver dressings: an in vitro comparison10.1099/jmm.0.46124-0 ↗
22. Polyurethane anionomers containing metal ions with antimicrobial properties: thermal, mechanical and biological characterization10.1016/j.actbio.2010.03.042 ↗
23. Its antibacterial properties and mechanism of action10.12968/jowc.2002.11.4.26389 ↗
24. Strain specificity in antimicrobial activity of silver and copper nanoparticles10.1016/j.actbio.2007.11.006 ↗
25. Comparative evaluation of silver-containing antimicrobial dressings and drugs10.1111/j.1742-481X.2007.00316.x ↗
26. The development and functions of silver in water purification and disease control10.1016/S0920-5861(96)00203-9 ↗
27. Functionally graded hydroxyapatite coatings doped with antibacterial components10.1016/j.actbio.2009.12.002 ↗
28. A facile method to construct hybrid multilayered films as a strong and multifunctional antibacterial coating10.1002/jbm.b.30979 ↗
29. Antibacterial silver-containing silica glass prepared by sol–gel method10.1016/S0142-9612(99)00201-X ↗
30. Wettability and antibacterial activity of modified diamond-like carbon films10.1016/j.apsusc.2009.05.091 ↗
31. Study on wear resistance of TiN multi-permeation layer using glow plasma surface alloying10.1016/j.surfcoat.2006.07.125 ↗
32. A study on double glow plasma surface metallurgy Mo–Cr high speed steel of carbon steel10.1016/j.surfcoat.2006.07.221 ↗
33. The generation of wear-resistant antimicrobial stainless steel surfaces by active screen plasma alloying with N and nanocrystalline Ag10.1002/jbm.b.31573 ↗
34. Bowden · 1950
35. Frictional behavior and adhesion of Ag and Au films applied to aluminum oxide by oxygen–ion assisted screen cage ion plating10.1016/0257-8972(94)90205-4 ↗
36. Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co–29Cr–6Mo alloys10.1016/j.actamat.2006.10.005 ↗
37. The use of scratch adhesion testing for the determination of interfacial adhesion: the importance of frictional drag10.1016/0257-8972(88)90178-8 ↗
38. Nanocrystalline silver dressings as an efficient anti-MRSA barrier: a new solution to an increasing problem10.1016/j.jhin.2005.04.001 ↗
39. Surface modification of medical metals by ion implantation of silver and copper10.1016/j.vacuum.2006.12.011 ↗
40. Coatings tribology – contact mechanisms and surface design10.1016/S0301-679X(98)00013-9 ↗