journal article·2015-12

Preparation of Ti2AlC MAX Phase Coating by DC Magnetron Sputtering Deposition and Vacuum Heat Treatment

Zongjian Feng, Peiling Ke, Aiying Wang

Publisher page

Abstract

Due to the excellent corrosion resistance and high irradiation damage resistance, Ti 2 AlC MAX phase is considered as a candidate for applications as corrosion resistant and irradiation resistant protective coating. MAX phase coatings can be fabricated through firstly depositing a coating containing the three elements M , A , and X close to stoichiometry of the MAX phases using physical vapor deposition, followed by heat treatment in vacuum. In this work, Ti–Al–C coating was prepared on austenitic stainless steels by reactive DC magnetron sputtering with a compound Ti 50 Al 50 target, and CH 4 used as the reactive gas. It was found that the as-deposited coating is mainly composed of Ti 3 AlC antiperovskite phase with supersaturated solid solution of Al. Additionally, the ratio of Ti/Al remained the same as that of the target composition. Nevertheless, a thicker thermally grown Ti 2 AlC MAX phase coating was obtained after being annealed at 800 °C in vacuum for 1 h. Meanwhile, the ratio of Ti/Al became close to stoichiometry of Ti 2 AlC MAX phases. It can be understood that owing to the higher activity of Al, it diffused quickly into the substrate during annealing, and then more stable Ti 2 AlC MAX phases transformed from the Ti 3 AlC antiperovskite phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Barsoum · Prog. Solid State Chem · 2000 · 28 · 20110.1016/S0079-6786(00)00006-6 ↗
2. Eklund · Thin Solid Films · 2010 · 518 · 185110.1016/j.tsf.2009.07.184 ↗
3. Sun · Int. Mater. Rev · 2011 · 56 · 14310.1179/1743280410Y.0000000001 ↗
4. Hoffman · Nucl. Eng. Des · 2012 · 244 · 1710.1016/j.nucengdes.2011.12.009 ↗
5. Li · Surf. Coat. Technol · 2010 · 204 · 383810.1016/j.surfcoat.2010.04.067 ↗
6. Frodelius · Thin Solid Films · 2010 · 518 · 162110.1016/j.tsf.2009.11.059 ↗
7. Emmerlich · Acta Mater · 2007 · 55 · 147910.1016/j.actamat.2006.10.010 ↗
8. Vishnyakov · Vacuum · 2013 · 93 · 5610.1016/j.vacuum.2013.01.003 ↗
9. Zhang · Surf. Coat. Technol · 2012 · 212 · 19910.1016/j.surfcoat.2012.09.050 ↗
10. Jiang · Thin Solid Films · 2013 · 537 · 110.1016/j.tsf.2012.09.021 ↗
11. Rosén · J. Appl. Phys · 2007 · 101 · 05610110.1063/1.2709571 ↗
12. Guenette · Thin Solid Films · 2010 · 519 · 76610.1016/j.tsf.2010.09.007 ↗
13. Garkas · Adv. Mater. Res · 2010 · 89–91 · 20810.4028/www.scientific.net/AMR.89-91.208 ↗
14. Li · Appl. Surf. Sci · 2012 · 263 · 45710.1016/j.apsusc.2012.09.082 ↗
15. Yang · Surf. Coat. Technol · 2012 · 206 · 266110.1016/j.surfcoat.2011.11.013 ↗
16. Abdulkadhim · Acta Mater · 2011 · 59 · 616810.1016/j.actamat.2011.06.029 ↗
17. Presser · J. Raman Spectrosc · 2012 · 43 · 16810.1002/jrs.3036 ↗
18. Barsoum · Metall. Mater. Trans. A · 2000 · 31 · 185710.1007/s11661-006-0243-3 ↗
19. Sayman · Mater. Des · 2009 · 30 · 77010.1016/j.matdes.2008.06.004 ↗
20. Pietzka · J. Phase Equilibr · 1994 · 15 · 39210.1007/BF02647559 ↗