Preliminary study of microstructure, mechanical properties and corrosion resistance of antibacterial Ti-15Zr-xCu alloy for dental application
Source abstract
Abstract
Abstract Ti-15Zr-xCu (3 ≤ x ≤ 7, wt.%) novel antibacterial and antibiofilm alloys with competitive mechanical properties, biological responses and corrosion resistance were designed and fabricated. Annealing heat treatment on Ti-15Zr-7Cu (TZC-7A), after holding for 2 h at slightly above their beta transus temperature (BTT) ensured their tensile strength (UTS), yield strength (YS) and hardness (HRV) were improved by 31.2%, 20% and 12.3% respectively compared to the control without Cu, Ti-15Zr (T-15ZA). Although the 3 wt.% Cu alloy displayed the highest elongation (26%), the TZC-7A alloy also possessed a good ductility. Presence of evenly dispersed Ti2Cu and Zr2Cu Cu-rich intermetallic phases formed as interwoven and alternating lamellae within the α + β matrix as a result of Cu addition, as revealed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These greatly contributed to their strengthening and bactericidal properties. Over 98% antibacterial effect against E. coli and S. aureus have been imparted, coupled with excellent biofilm inhibition. Potentiodynamic polarization curves showed that the TZC-7A alloy possessed higher corrosion resistance than commercially pure titanium, cp-Ti; contact angle test revealed enhanced hydrophilicity; while confocal laser scanning microscopy (CLSM) and cell counting kit (CCK-8) assays also displayed drastically lowered bacterial adhesion rate with comparatively no cytotoxicity. Cell attachment on all alloys was similar but the best spread was obtained on TZC-7A after 24 h. The developed alloy has good potential as an antibacterial implant material with combination of optimized properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Zhang · Mater. Sci. Eng. C · 2013 · 33 · 428010.1016/j.msec.2013.06.016 ↗
2. Medvedev · J. Mech. Behav. Biomed. Mater. · 2016 · 62 · 38410.1016/j.jmbbm.2016.05.008 ↗
3. Wang · Mater. Sci. Eng. C · 2015 · 51 · 14810.1016/j.msec.2015.02.028 ↗
4. Rafael · J. Mater. Res. Technol. · 2015 · 4 · 18010.1016/j.jmrt.2015.02.007 ↗
5. Correa · Defect Diffus. Forum · 2015 · 365 · 30510.4028/www.scientific.net/DDF.365.305 ↗
6. Rocha · J. Alloys Compd. · 2017 · 727 · 24610.1016/j.jallcom.2017.08.072 ↗
7. Li · Materials (Basel) · 2014 · 7 · 170910.3390/ma7031709 ↗
8. Galindo-Nava · Mater. Sci. Eng. A · 2018 · 712 · 12210.1016/j.msea.2017.11.087 ↗
9. Nagase · Mater. Trans. · 2009 · 50 · 87210.2320/matertrans.MRA2008379 ↗
10. Fornell · Mater. Sci. Eng. A · 2013 · 559 · 15910.1016/j.msea.2012.08.058 ↗
11. Institut Straumann · 2009
12. Institut Straumann Implants · 2006
13. Ren · J. Mater. Sci. Technol. · 2014 · 30 · 69910.1016/j.jmst.2013.12.014 ↗
14. Li · Sci. Rep. · 2016 · 6 · 3747510.1038/srep37475 ↗
15. Liu · Sci. Rep. · 2016 · 6 · 2998510.1038/srep29985 ↗
16. Zhang · Mater. Sci. Eng. C · 2016 · 69 · 121010.1016/j.msec.2016.08.033 ↗
17. Jin · J. Mater. Sci. Technol. · 2016 · 32 · 83510.1016/j.jmst.2016.06.022 ↗
18. Michelle Grandin · Materials (Basel) · 2012 · 5 · 134810.3390/ma5081348 ↗
19. Hienz · J. Immunol. Res. · 2015 · 201510.1155/2015/615486 ↗
20. Lin · Sci. Rep. · 2016 · 6 · 3790110.1038/srep37901 ↗
21. Hatton · Surf. Coat. Modif. Met. Biomater. · 2015 · 379
22. Peng · ACS Appl. Mater. Interfaces · 2019 · 11 · 12510.1021/acsami.8b14038 ↗
23. He · Coatings · 2017 · 7 · 4510.3390/coatings7030045 ↗
24. Ma · J. Mater. Sci. Technol. · 2015 · 31 · 72310.1016/j.jmst.2015.04.002 ↗
25. Zhang · Ceram. Int. · 2018 · 44 · 971110.1016/j.ceramint.2018.02.202 ↗
26. Ren · J. Mater. Sci. Technol. · 2013 · 29 · 100510.1016/j.jmst.2013.09.008 ↗
27. Zhuang · J. Biomed. Mater. Res. Part B-Appl. Biomater. · 2020 · 108 · 48410.1002/jbm.b.34405 ↗
28. Zhang · Rare Met. · 2019 · 38 · 47610.1007/s12598-019-01245-y ↗
29. Peng · Mater. Sci. Eng. C · 2018 · 93 · 49510.1016/j.msec.2018.08.018 ↗
30. Zhao · J. Mater. Sci. Technol. · 2017 · 33 · 160410.1016/j.jmst.2017.03.025 ↗
31. Abdel-Hady · Scr. Mater. · 2006 · 55 · 47710.1016/j.scriptamat.2006.04.022 ↗
32. Turchanin · Powder Metallurgy Met. Ceram. · 2008 · 47 · 34410.1007/s11106-008-9026-2 ↗
33. Donachie · 2001
34. Saleem Khan · J. Mater. Sci. Technol. · 2019 · 35 · 21610.1016/j.jmst.2018.08.001 ↗
35. Meng · J. Alloys Compd. · 2018 · 745 · 57910.1016/j.jallcom.2018.02.259 ↗
36. Nicoara · Acta Biomater. · 2016 · 36 · 32310.1016/j.actbio.2016.03.020 ↗
37. Zhang · Mater. Sci. Eng. C · 2016 · 69 · 76010.1016/j.msec.2016.07.051 ↗
38. Cipriano · Acta Biomater. · 2017 · 62 · 39710.1016/j.actbio.2017.08.017 ↗
39. Bai · Mater. Sci. Eng. C · 2016 · 59 · 56510.1016/j.msec.2015.10.062 ↗
40. Bao · Bioact. Mater. · 2018 · 3 · 28
41. Osman · Materials (Basel) · 2015 · 8 · 93210.3390/ma8030932 ↗
42. Kunčická · Prog. Mater. Sci. · 2017 · 88 · 23210.1016/j.pmatsci.2017.04.002 ↗
43. Mahapatro · Mater. Sci. Eng. C · 2015 · 55 · 22710.1016/j.msec.2015.05.018 ↗
44. Haghighi · Mater. Des. · 2015 · 76 · 4710.1016/j.matdes.2015.03.028 ↗
45. Saini · World J. Clin. Cases · 2015 · 3 · 5210.12998/wjcc.v3.i1.52 ↗
46. Botstein · Mater. Sci. Eng. A · 1996 · 206 · 1410.1016/0921-5093(95)09885-2 ↗
47. Bose · Acta Biomater. · 2018 · 66 · 610.1016/j.actbio.2017.11.003 ↗
48. Huang · J. Alloys Compd. · 2017 · 697 · 18210.1016/j.jallcom.2016.12.139 ↗
49. Wang · Prog. Nat. Sci. Mater. Int. · 2016 · 26 · 67110.1016/j.pnsc.2016.12.006 ↗
50. Li · J. Mater. Sci. Technol. · 2014 · 30 · 88810.1016/j.jmst.2014.04.010 ↗
51. Biesiekierski · Acta Biomater. · 2012 · 8 · 166110.1016/j.actbio.2012.01.018 ↗
52. Chan · Appl. Surf. Sci. · 2017 · 404 · 6710.1016/j.apsusc.2017.01.233 ↗