journal article·2010-07

Modification, crosslinking and reactive electrospinning of a thermoplastic medical polyurethane for vascular graft applications

J.P. Theron, J.H. Knoetze, R.D. Sanderson, R. Hunter, K. Mequanint, T. Franz, P. Zilla, D. Bezuidenhout

Acta Biomaterialia· Volume 6· Issue 7
Publisher page

Abstract

Thermoplastic polyurethanes are used in a variety of medical devices and experimental tissue engineering scaffolds. Despite advances in polymer composition to improve their stability, the correct balance between chemical and mechanical properties is not always achieved. A model compound (MC) simulating the structure of a widely used medical polyurethane (Pellethane) was synthesized and reacted with aliphatic and olefinic acyl chlorides to study the reaction site and conditions. After adopting the conditions to the olefinic modification of Pellethane, processing into flat sheets, and crosslinking by thermal initiation or ultraviolet radiation, mechanical properties were determined. The modified polyurethane was additionally electrospun under ultraviolet light to produce a crosslinked tubular vascular graft prototype. Model compound studies showed reaction at the carbamide nitrogen, and the modification of Pellethane with pentenoyl chloride could be accurately controlled to up to 20% (correlation: rho=0.99). Successful crosslinking was confirmed by insolubility of the materials. Initiator concentrations were optimized and the crosslink densities shown to increase with increasing modification. Crosslinking of Pellethane containing an increasing number of pentenoyl groups resulted in decreases (up to 42%, p<0.01) in the hysteresis and 44% in creep (p<0.05), and in a significant improvement in degradation resistance in vitro. Modified Pellethane was successfully electrospun into tubular grafts and crosslinked using UV irradiation during and after spinning to render them insoluble. Prototype grafts had sufficient burst pressure (>550 mm Hg), and compliances of 12.1+/-0.8 and 6.2+/-0.3%/100 mm Hg for uncrosslinked and crosslinked samples, respectively. It is concluded that the viscoelastic properties of a standard thermoplastic polyurethane can be improved by modification and subsequent crosslinking, and that the modified material may be electrospun and initiated to yield crosslinked scaffolds. Such materials hold promise for the production of vascular and other porous scaffolds, where decreased hysteresis and creep may be required to prevent aneurismal dilation.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Polymer composites and self-healing · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. New prosthesis for use in bypass grafts with special emphasis10.1016/S0967-2109(02)00004-2 ↗
2. Autooxidative degradation of implanted polyether polyurethane devices
3. Lamba · 1998
4. Calcification of polyurethanes implanted subdermally in rats is enhanced by calciphylaxis10.1002/(SICI)1097-4636(199606)31:2<201::AID-JBM6>3.0.CO;2-R ↗
5. Large deformation rate-dependent stress-strain behaviour of polyurea and polyurethanes10.1016/j.polymer.2005.10.107 ↗
6. Stress–strain behaviour of thermoplastic polyurethanes10.1016/j.mechmat.2004.08.001 ↗
7. Biostable polymers as durable scaffolds for tissue engineered vascular prostheses
8. Phosphorus-containing polyurethanes based on bisphenol-s, prepared by N-alkylation10.1016/S0014-3057(96)00093-6 ↗
9. Phosphorus-containing polyurethanes, prepared by N-modification10.1016/0014-3057(90)90100-I ↗
10. Levy R, Alferiev IS, inventors. Derivated polyurethane compositions which exhibit enhanced stability in biological systems and methods of making the same. USA Patent No. US 6,320,011 B1, November 20; 2001.
11. Anionic synthesis of poly(urethane-g-acrylonitrile)10.1016/0032-3861(79)90075-2 ↗
12. Bacterial adhesion on polyurethane surfaces conditioned with thrombus components10.1097/00002480-199609000-00033 ↗
13. Synthesis and hemocompatibilities of new segmented polyurethanes and poly(urethane urea)s with poly(butadiene) and phosphatidylcholine analogues in the main chains and long-chain alkyl groups in the side chains10.1021/cm960615o ↗
14. Structure-property behaviour of poly(dimethylsiloxane) based segmented polyurea copolymers modified with poly(propylene oxide)10.1016/j.polymer.2005.06.050 ↗
15. Fatique behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-esters) copolymers10.1016/S0032-3861(03)00418-X ↗
16. Flexure creep properties of E-glass reinforced polymers10.1016/j.compstruct.2003.09.022 ↗
17. Mechanical response of dibenzyl-based polyurethanes with diol chain extension10.1016/j.polymer.2005.03.046 ↗
18. Phosphorus-containing polyurethanes and copolyurethanes based on 1, 2-dihydroxy-1, 2-bis(diethoxyphosphinyl)10.1002/pol.1984.170220401 ↗
19. Reitel C, Goethlich L, inventors. Curable coating composition. USA Patent No. US 4,239,866, December 16; 1980.
20. Derivatization of a new poly(ether urethane amide) containing chemically active sites10.1016/0142-9612(95)91091-C ↗
21. The effect of crosslinking on properties of polyurethane elastomers10.1002/app.1991.070420211 ↗
22. Synthesis and characterization of UV-curable vinyl ether functionalized urethane oligomers10.1016/S0300-9440(03)00148-6 ↗
23. Electrospinning
24. Electrospun polydioxanone-elastin blends: potential for bioresorbable vascular grafts10.1088/1748-6041/1/2/004 ↗
25. Smith · 2001
26. Metallization of cross-linked polyurethane resins by reduction of polymer-incorporated metal ion10.1016/S0032-3861(03)00650-5 ↗
27. Synthesis of hydrolytically stable low elastic modulus polyurethane-urea for biomedical applications10.1002/(SICI)1097-0126(200001)49:1<88::AID-PI298>3.0.CO;2-7 ↗
28. Mark · 1966
29. A comparison of micro CT with other techniques used in the characterization of scaffolds10.1016/j.biomaterials.2005.08.035 ↗
30. The in vivo auto-oxidation of polyether polyurethane by metal ions10.1163/156856290X00062 ↗
31. Incorporation and controlled release of a hydrophilic antibiotic using poly(lactide-co-glycolide)-based electrospun nanofibrous scaffolds10.1016/j.jconrel.2004.04.009 ↗
32. Vascular grafts