Porous and strong bioactive glass (13-93) scaffolds prepared by unidirectional freezing of camphene-based suspensions
Source abstract
Abstract
Scaffolds of 13-93 bioactive glass (6Na(2)O, 12K(2)O, 5MgO, 20CaO, 4P(2)O(5), 53SiO(2); wt.%) with an oriented pore architecture were formed by unidirectional freezing of camphene-based suspensions, followed by thermal annealing of the frozen constructs to grow the camphene crystals. After sublimation of the camphene, the constructs were sintered (1 h at 700°C) to produce a dense glass phase with oriented macropores. The objective of this work was to study how constant freezing rates (1-7°C min(-1)) during the freezing step influenced the pore orientation and mechanical response of the scaffolds. When compared to scaffolds prepared by freezing the suspensions on a substrate kept at a constant temperature of 3°C (time-dependent freezing rate), higher freezing rates resulted in better pore orientation, a more homogeneous microstructure and a marked improvement in the mechanical response of the scaffolds in compression. Scaffolds fabricated using a constant freezing rate of 7°C min(-1) (porosity=50±4%; average pore diameter=100 μm), had a compressive strength of 47±5 MPa and an elastic modulus of 11±3 GPa (in the orientation direction). In comparison, scaffolds prepared by freezing on the constant-temperature substrate had strength and modulus values of 35±11 MPa and 8±3 GPa, respectively. These oriented bioactive glass scaffolds prepared by the constant freezing rate route could potentially be used for the repair of defects in load-bearing bones, such as segmental defects in the long bones.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Temporomandibular Joint Disorders · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. US Census Bureau. Health and nutrition. US Census Bureau statistical abstracts of the United States. Washington, DC; 2009. p. 117.
2. Potential of ceramic materials as permanently implantable skeletal prostheses10.1002/jbm.820040309 ↗
3. The challenge of establishing preclinical models for segmental bone defect research10.1016/j.biomaterials.2008.12.050 ↗
4. Microtubular architecture of biodegradable polymer scaffolds10.1002/1097-4636(20010915)56:4<469::AID-JBM1118>3.0.CO;2-H ↗
5. Freeze casting of porous hydroxyapatite scaffolds. II. Sintering, microstructure, and mechanical behavior10.1002/jbm.b.31051 ↗
6. Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers10.1016/j.actbio.2010.12.017 ↗
7. Critical evaluation of known bone materials properties to realize anisotropic FE-simulation of the proximal femur10.1016/S0021-9290(00)00069-5 ↗
8. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.06.028 ↗
9. Preparation and in vitro evaluation of bioactive glass (13-93) scaffolds with oriented microstructures for repair and regeneration of load-bearing bones10.1002/jbm.a.32637 ↗
10. Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures10.1016/j.jeurceramsoc.2010.07.032 ↗
11. Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles10.1038/nmat1487 ↗
12. Manipulation of porous bioceramics microstructures by freezing of suspensions containing binary mixtures of solvents10.1111/j.1551-2916.2008.02795.x ↗
13. Room-temperature freeze casting for ceramics with nonaqueous sublimable vehicles in the naphthalene–camphor eutectic system10.1111/j.1151-2916.2004.tb06353.x ↗
14. Architectural control of freeze-cast ceramics through additives and templating10.1111/j.1551-2916.2009.03087.x ↗
15. Fabrication of aligned lamellar porous alumina using directional solidification of aqueous slurries with an applied electrostatic field10.1016/j.jeurceramsoc.2010.03.012 ↗
16. Oriented bioactive glass (13-93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: microstructure and mechanical response10.1016/j.actbio.2010.08.025 ↗
17. Control of pore structure and size in freeze-dried collagen sponges10.1002/jbm.1028 ↗
18. Influence of freezing rate on pore structure in freeze-dried collagen-GAG scaffolds10.1016/S0142-9612(03)00630-6 ↗
19. Control of lamellae spacing during freeze casting of ceramics using double-side cooling as a novel processing route10.1111/j.1551-2916.2008.02673.x ↗
20. Preparation and bioactive characteristics of a porous 13-93 glass, and its fabrication into the articulating surface of a proximal tibia10.1002/jbm.a.31156 ↗
21. Mechanical and in vitro performance of 13-93 bioactive glass scaffolds prepared by a polymer foam replication technique10.1016/j.actbio.2008.04.019 ↗
22. Huang TS, Doiphode ND, Rahaman MN, Leu MC, Bal BS, Day DE. Porous and strong bioactive glass (13-93) scaffolds prepared by freeze extrusion fabrication. Mater Sci Eng C 2011. doi:10.1016/j.msec.2011.06.004.10.1016/j.msec.2011.06.004 ↗
23. The influence of alkali and alkaline earths on the working range for bioactive glasses10.1002/(SICI)1097-4636(199707)36:1<109::AID-JBM13>3.0.CO;2-D ↗
24. Growth and differentiation of osteoblastic cells on 13-93 bioactive glass fibers and scaffolds10.1016/j.actbio.2007.07.006 ↗
25. Freezing as a path to build complex composites10.1126/science.1120937 ↗
26. Particle redistribution during dendritic solidification of particle suspensions10.1111/j.1551-2916.2006.01094.x ↗
27. Nanostructured bioactive glass scaffolds for bone repair10.1002/9780470456262.ch19 ↗
28. Bioactive borosilicate glass scaffolds: improvement on the strength of glass-based scaffolds for tissue engineering
29. Optimising bioactive glass scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.07.017 ↗
30. Freeze extrusion fabrication of 13-93 bioactive glass scaffolds for bone repair
31. Bio-inspired highly porous and strong glass scaffolds10.1002/adfm.201002030 ↗