journal article·2014-02Open access

Peri- and intra-implant bone response to microporous Ti coatings with surface modification

Annabel Braem, Amol Chaudhari, Marcio Vivan Cardoso, Jan Schrooten, Joke Duyck, Jozef Vleugels

Acta Biomaterialia· Volume 10· Issue 2

Abstract

Bone growth on and into implants exhibiting substantial surface porosity is a promising strategy in order to improve the long-term stable fixation of bone implants. However, the reliability in clinical applications remains a point of discussion. Most attention has been dedicated to the role of macroporosity, leading to the general consensus of a minimal pore size of 50-100 μm in order to allow bone ingrowth. In this in vivo study, we assessed the feasibility of early bone ingrowth into a predominantly microporous Ti coating with an average thickness of 150 μm and the hypothesis of improving the bone response through surface modification of the porous coating. Implants were placed in the cortical bone of rabbit tibiae for periods of 2 and 4 weeks and evaluated histologically and histomorphometrically using light microscopy and scanning electron microscopy. Bone with osteocytes encased in the mineralized matrix was found throughout the porous Ti coating up to the coating/substrate interface, highlighting that osseointegration of microporosities (<10 μm) was achievable. The bone trabeculae interweaved with the pore struts, establishing a large contact area which might enable an improved load transfer and stronger implant/bone interface. Furthermore, there was a clear interconnection with the surrounding cortical bone, suggesting that mechanical interlocking of the coating in the host bone in the long term is possible. When surface modifications inside the porous structure further reduced the interconnective pore size to the submicrometer level, bone ingrowth was impaired. On the other hand, application of a sol-gel-derived bioactive glass-ceramic coating without altering the pore characteristics was found to significantly improve bone regeneration around the coating, while still supporting bone ingrowth.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Data obtained from the Swedish Hip Arthroplasty Register: Annual report 2011. Online. 2013 April. Available from URL: http://www.shpr.se.
2. 10-Year Survival and success rates of 511 titanium implants with a sandblasted and acid-etched surface: a retrospective study in 303 partially edentulous patients10.1111/j.1708-8208.2012.00456.x ↗
3. Total hip arthroplasty for primary osteoarthrosis in younger patients in the Finnish arthroplasty register10.1080/00016470510030292 ↗
4. Primary total hip arthroplasty with a porous-coated acetabular component10.2106/JBJS.H.00168 ↗
5. What works best, a cemented or cementless primary total hip arthroplasty?10.1007/s11999-010-1459-5 ↗
6. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
7. Surface treatments and roughness properties of Ti-based biomaterials10.1023/B:JMSM.0000042679.28493.7f ↗
8. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
9. Surface modification of bone implants through wet chemistry10.1039/b517634d ↗
10. Advancing dental implant surface technology – from micron- to nanotopography10.1016/j.biomaterials.2008.05.012 ↗
11. On implant surfaces: a review of current knowledge and opinions
12. Classification of osseointegrated implant surfaces: materials, chemistry and topography10.1016/j.tibtech.2009.12.003 ↗
13. Organic-inorganic surface modifications for titanium implant surfaces10.1007/s11095-008-9617-0 ↗
14. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
15. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
16. Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants10.1016/j.biomaterials.2006.08.013 ↗
17. Osteointegration of titanium implant is sensitive to specific nanostructure morphology10.1016/j.actbio.2012.01.021 ↗
18. Early bone healing around 2 different experimental, HA grit-blasted, and dual acid-etched titanium implant surfaces. A pilot study in rabbits10.1097/ID.0b013e3182611cd7 ↗
19. Osteogenicity of titanium implants coated with calcium phosphate or collagen type-I in osteoporotic rats10.1016/j.biomaterials.2013.02.033 ↗
20. Bony integration of titanium implants with a novel bioactive calcium titanate (Ca4Ti3O10) surface treatment in a rabbit model10.1002/jbm.a.34186 ↗
21. Evaluation of early bone response to fluoride-modified and anodically oxidized titanium implants through continuous remove torque analysis10.1097/ID.0b013e31826917f6 ↗
22. Bone tissue reactions to biomimetic ion-substituted apatite surfaces on titanium implants10.1098/rsif.2011.0808 ↗
23. The synergistic effect of hierarchical micro/nano-topography and bioactive ions for enhanced osseointegration10.1016/j.biomaterials.2013.01.008 ↗
24. Bone regeneration by osteoconductivity of porous titanium implants manufactured by selective laser melting: a histological and micro computed tomography study in the rabbit10.1089/ten.tea.2012.0753 ↗
25. Osteoinduction of porous titanium: a comparative study between acid-alkali and chemical-thermal treatments10.1002/jbm.b.31728 ↗
26. Ectopic bone formation by 3D porous calcium phosphate-Ti6Al4V hybrids produced by perfusion electrodeposition10.1016/j.biomaterials.2012.02.026 ↗
27. Osteoinductive hydroxyapatite-coated titanium implants10.1016/j.biomaterials.2012.01.050 ↗
28. A hierarchically graded bioactive scaffold bonded to titanium substrates for attachment to bone10.1016/j.biomaterials.2011.06.051 ↗
29. Porous titanium coatings through electrophoretic deposition of TiH2 suspensions10.1002/adem.201100011 ↗
30. Multiscale osteointegraton as a new paradigm for the design of calcium phosphate scaffolds for bone regeneration10.1016/j.biomaterials.2010.01.052 ↗
31. The effects of microporosity on osteoinduction of calcium phosphate bone graft substitute biomaterials10.1016/j.actbio.2012.03.038 ↗
32. Analysis of the roles of microporosity and BMP-2 on multiple measures of bone regeneration and healing in calcium phosphate scaffolds10.1016/j.actbio.2010.12.030 ↗
33. Low-temperature preparation of anatase and rutile layers on titanium substrates and their ability to induce in vitro apatite deposition10.1111/j.1551-2916.2004.01635.x ↗
34. Hydrothermal synthesis of a nanocrystalline anatase layer on Ti6Al4V implants10.1016/j.surfcoat.2008.11.031 ↗
35. Bouazza S, Fuchs E, Rosin A, Willert-Porada M, Synthesis and properties of graded porous Ti–TiO2 multifunctional composites obtained by different processing methods. In: Kawasaki A, Kumakawa A, Niino M, editors. 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, 22–25 September 2008, Sendai, Japan. Materials Science Forum, vol. 631–32. Zürich: Trans Tech; 2010. p. 141–46.10.4028/www.scientific.net/MSF.631-632.141 ↗
36. Resonance frequency and removal torque analysis of implants with turned and anodized surface oxides10.1034/j.1600-0501.2002.130304.x ↗
37. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation10.1016/j.biomaterials.2003.09.048 ↗
38. Apatite induction on Ca-containing titania formed by micro-arc oxidation10.1111/j.1551-2916.2005.00476.x ↗
40. The effect of ionic products from bioactive glass dissolution on osteoblast proliferation and collagen production10.1016/j.biomaterials.2003.09.086 ↗
41. Sol-gel silica-based biomaterials and bone tissue regeneration10.1016/j.actbio.2010.02.012 ↗
42. Biofunctionalisation of porous titanium coatings through sol-gel impregnation with a bioactive glass-ceramic10.1016/j.msec.2012.06.017 ↗
43. Bone tissue response to porous and functionalized titanium and silica based coatings10.1371/journal.pone.0024186 ↗
44. Okamoto H, Hg (mercury) binary alloy phase diagrams. In: ASM Handbook, vol. 3: Alloy Phase Diagrams. Materials Park, OH: ASM, International; 1992.
45. Early cortical bone healing around loaded titanium implants: a histological study in the rabbit10.1111/j.1600-0501.2008.01623.x ↗
46. A 7-year life table analysis from a prospective study on ITI implants with special emphasis on the use of short implants. Results from a private practice10.1111/j.1600-0501.2004.00978.x ↗
47. Success and failure rates of osseointegrated implants in function in regenerated bone for 72 to 133 months
48. Survivorship of a low-stiffness extensively porous-coated femoral stem at 10 years10.1007/s11999-009-0950-3 ↗
49. Cementless total hip arthroplasty using titanium, plasma-sprayed implants: a study with 10 to 15 years of follow-up10.1177/230949901101900207 ↗
50. Osseointegration into a novel titanium foam implant in the distal femur of a rabbit10.1002/jbm.b.31541 ↗
51. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
52. J. Staphylococcal biofilm growth on smooth and porous titanium coatings for biomedical applications
53. Microporosity enhances bioactivity of synthetic bone graft substitutes10.1007/s10856-005-6988-1 ↗
54. 3D microenvironment as essential element for osteoinduction by biomaterials10.1016/j.biomaterials.2004.09.056 ↗
55. Bone response inside free-form fabricated macroporous hydroxyapatite scaffolds with and without an open microporosity10.1111/j.1708-8208.2007.00031.x ↗
56. Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits10.1002/jbm.1069 ↗
57. Calcium phosphate sol-gel-derived thin films on porous-surfaced implants for enhanced osteoconductivity. Part II: Short-term in vivo studies10.1016/j.biomaterials.2003.12.039 ↗
58. Initial evaluation of bone ingrowth into a novel porous titanium coating10.1002/jbm.b.31624 ↗
59. Direct visualization and quantification of bone growth into porous titanium implants using micro computed tomography
60. Genetic design of bioactive glass10.1016/j.jeurceramsoc.2008.08.002 ↗
61. Bioactive sol-gel glasses with and without a hydroxycarbonate apatite layer as substrate for osteoblast cell adhesion and proliferation10.1016/S0142-9612(03)00200-X ↗