Fluorination of electrospun hydrogel fibers for a controlled release drug delivery system
Source abstract
Abstract
Electrospinning and fluorination were carried out in order to obtain a controlled release drug delivery system to solve the problem of both an initial burst of the drug and a limited release time. Poly(vinyl alcohol) was electrospun with Procion Blue as a model drug and heat treated in order to obtain cross-linked hydrogel fibers. Two different kinds of electrospun fibers of thin and thick diameters were obtained by controlling the electrospinning conditions. Thin fibers offer more available sites than thick fibers for surface modification during fluorination. Fluorination was conducted to control the release period by introducing hydrophobic functional groups on the surface of fibers. With an increase in the reaction pressure of the fluorine gas hydrophobic C-F and C-F(2) bonds were more effectively introduced. Over-fluorination of the fibers at higher reaction pressures of fluorine gas led to the introduction of C-F(2) bonds, which made the surface of the fibers hydrophobic and resulted in a decrease in their swelling potential. When C-F bonds were generated the initial drug burst decreased dramatically and total release time increased significantly, by a factor of approximately 6.7 times.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Structure formation and characterization of injectable drug loaded biodegradable devices: in situ implants versus in situ microparticles10.1016/j.ejps.2008.03.004 ↗
2. The development of microgels/nanogels for drug delivery applications10.1016/j.progpolymsci.2008.01.002 ↗
3. Injectable in situ forming drug delivery system for cancer chemotherapy using a novel tissue adhesive: characterization and in vitro evaluation10.1016/j.ejpb.2006.11.022 ↗
4. Effect of molecular weight on fibrous PVA produced by electrospinning10.1016/S0167-577X(03)00532-9 ↗
5. Controlled release behavior of temperature responsive composite hydrogel containing activated carbon10.5714/CL.2008.9.4.283 ↗
6. Controlled release behavior of pH-responsive composite hydrogel containing activated carbon10.5714/CL.2009.10.1.033 ↗
7. Novel approach to the chemical modification of poly(vinyl alcohol): phosphorylation10.1002/pola.10654 ↗
8. Poly(vinyl alcohol) hydrogels as soft contact lens material10.1163/156856294X00103 ↗
9. Outcome of subcutaneous islet transplantation improved by polymer device 110.1097/00007890-199606150-00001 ↗
10. Transport and hydrolysis of urea in a reactor-separator combining an anion-exchange membrane and immobilized urease10.1002/jctb.280610411 ↗
11. Electrospun poly(vinyl alcohol)/glucose oxidase biocomposite membranes for biosensor applications10.1016/j.reactfunctpolym.2006.05.005 ↗
12. Electrospun nano-fibre mats with antibacterial properties from quaternised chitosan and poly(vinyl alcohol)10.1016/j.carres.2006.05.006 ↗
13. Preparation of silver nanoparticles dispersed in polyacrylonitrile nanofiber film spun by electrospinning10.1016/j.matlet.2005.05.016 ↗
14. One-step preparation of ultrafine poly(acrylonitrile) fibers containing silver nanoparticles10.1016/j.matlet.2005.05.005 ↗
15. A nanofibrous composite membrane of PLGA–chitosan/PVA prepared by electrospinning10.1016/j.eurpolymj.2006.04.021 ↗
16. Fiber mats of poly(vinyl alcohol)/silica composite via electrospinning10.1016/S0167-577X(02)01036-4 ↗
17. Synthesis using electrospinning and stabilization of single layer macroporous films and fibrous networks of poly(vinyl alcohol)10.1016/j.memsci.2005.09.024 ↗
18. Chitosan bicomponent nanofibers and nanoporous fibers10.1016/j.carres.2005.11.028 ↗
19. Filtration properties of electrospinning nanofibers10.1002/app.24361 ↗
20. PH-responsive swelling behavior of poly(vinyl alcohol)/poly(acrylic acid) bi-component fibrous hydrogel membranes10.1016/j.polymer.2005.04.066 ↗
21. Controlled release of ketoprofen electrospun poly(vinyl alcohol) nanofibers10.1016/j.msea.2007.01.039 ↗
22. Removal of heavy metal ions from aqueous solutions by filtration with a novel complexing membrane containing poly(ethyleneimine) in a poly(vinyl alcohol) matrix10.1016/j.memsci.2007.09.027 ↗
23. Surface properties of oxyfluorinated PAN-based carbon fibers10.1016/S0008-6223(02)00152-5 ↗
24. The effect of embedded vanadium catalyst on activated electrospun CFs for hydrogen storage10.1016/j.micromeso.2008.02.027 ↗
25. Preparation of PAN-based electrospun nanofiber webs containing TiO2 for photocatalytic degradation10.1016/j.matlet.2008.04.019 ↗
26. The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption10.1016/j.jcis.2007.10.024 ↗
27. Preparation and characteristics of electrospun activated carbon materials having meso- and macropores10.1016/j.jcis.2007.05.033 ↗
28. Surface properties of fluorinated single-walled carbon nanotubes10.1016/S0022-1139(02)00316-0 ↗
29. Syntheses and properties of fluorinated carbon materials10.1016/j.jfluchem.2006.11.014 ↗
30. Electrically controlled release of sulfosalicylic acid from crosslinked poly(vinyl alcohol) hydrogel10.1016/j.ijpharm.2007.12.023 ↗
31. Novel plasma approach for the synthesis of highly fluorinated thin surface layers10.1021/la026032c ↗
32. Skoog · 1998
33. Biodegradable electrospun fibers for drug delivery10.1016/S0168-3659(03)00372-9 ↗
34. Development of oral controlled release preparations, a PVA swelling controlled release system (SCRS). II. In vitro and in vivo evaluation10.1016/S0168-3659(00)00244-3 ↗
35. The synthesis of novel pH-sensitive poly(vinyl alcohol) composite hydrogels using a freeze/thaw process for biomedical applications10.1016/j.ijpharm.2009.01.008 ↗