Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers
Source abstract
Abstract
This study addresses the mechanical properties of calcium polyphosphate (CPP) structures formed by stacked layers using a powder-based solid freeform fabrication (SFF) technique. The mechanical properties of the 35% porous structures were characterized by uniaxial compression testing for compressive strength determination and diametral compression testing to determine tensile strength. Fracture cleavage surfaces were analyzed using scanning electron microscopy. The effects of the fabrication process on the microarchitecture of the CPP samples were also investigated. Results suggest that the orientation of the stacked layers has a substantial influence on the mechanical behavior of the SFF-made CPP samples. The samples with layers stacked parallel to the mechanical compressive load are 48% stronger than those with the layers stacked perpendicular to the load. However, the samples with different stacking orientations are not significantly different in tensile strength. The observed anisotropic mechanical properties were analyzed based on the physical microstructural properties of the CPP structures.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Skeletal-tissue engineering
2. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
3. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity10.1016/j.jbiomech.2003.09.029 ↗
4. In vivo degradation of calcium phosphate cement incorporated into biodegradable microspheres10.1016/j.actbio.2009.12.028 ↗
5. In vivo degradation of porous poly(propylene fumarate)/poly(dl-lactic-co-glycolic acid) composite scaffolds10.1016/j.biomaterials.2004.11.039 ↗
6. Bone “mass” and the “mechanostat”: a proposal10.1002/ar.1092190104 ↗
7. Porous scaffold design for tissue engineering10.1038/nmat1421 ↗
8. Microarchitectural and mechanical characterization of oriented porous polymer scaffolds10.1016/S0142-9612(02)00361-7 ↗
9. 2006
10. Tissue engineering strategies for bone regeneration
11. Bioceramics of calcium orthophosphates10.1016/j.biomaterials.2009.11.050 ↗
12. 2006
13. 2004
14. Repair of osteochondral defects with biphasic cartilage-calcium polyphosphate constructs in a sheep model10.1016/j.biomaterials.2006.03.005 ↗
15. Porous calcium polyphosphate scaffolds for bone substitution applications—in vitro characterization10.1016/S0142-9612(00)00261-1 ↗
16. Gibson · 2010
17. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs10.1016/S0142-9612(03)00030-9 ↗
18. Chua CK, Leong KF, Lim CS. Rapid prototyping: principles and applications, 2nd ed. Singapore: Springer; 2003.10.1142/5064 ↗
19. Making tissue engineering scaffolds work. Review on the application of solid freeform fabrication technology to the production of tissue engineering scaffolds10.22203/eCM.v005a03 ↗
20. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems10.1016/j.tibtech.2004.05.005 ↗
21. A three-dimensional osteochondral composite scaffold for articular cartilage repair10.1016/S0142-9612(02)00223-5 ↗
22. Preparation of tricalcium phosphate/calcium pyrophosphate structures via rapid prototyping
23. Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants10.1016/j.biomaterials.2007.10.023 ↗
24. Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing10.1002/adfm.200700019 ↗
25. 3D powder printing of β-tricalcium phosphate ceramics using different strategies10.1002/adem.200800179 ↗
26. 3D printing of hydroxyapatite: effect of binder concentration in pre-coated particle on part strength10.1016/j.msec.2006.11.004 ↗
27. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering10.1002/jbm.b.30291 ↗
28. Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends10.1016/S0142-9612(03)00131-5 ↗
29. Porogen-based solid freeform fabrication of polycaprolactone–calcium phosphate scaffolds for tissue engineering10.1016/j.biomaterials.2006.03.049 ↗
30. The morphology of anisotropic 3D-printed hydroxyapatite scaffolds10.1016/j.biomaterials.2008.06.012 ↗
31. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants
32. Effect of particle size on three dimensional printed mesh structures10.1016/j.powtec.2008.12.011 ↗
33. Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds10.1016/j.actbio.2009.07.018 ↗
34. Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering10.1016/j.actbio.2010.02.002 ↗
35. Dependence of mechanical properties of polyamide components on build parameters in the SLS process10.1016/j.jmatprotec.2006.09.007 ↗
36. Measurement of anisotropic compressive strength of rapid prototyping parts10.1016/j.jmatprotec.2006.11.095 ↗
37. Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes10.1002/jbm.b.31610 ↗
38. Pilliar RM, Hong J, Santerre PJ. Method of manufacture of porous inorganic structures. US patent 7494614; 2009.
39. On the sintering characteristics of calcium polyphosphates10.4028/www.scientific.net/KEM.192-195.171 ↗
40. German · 1996
41. Compressive strength and diametral tensile strength of some calcium orthophosphate cements: a pilot study10.1007/BF00122197 ↗
42. Mixed-mode fracture of ceramics in diametral compression10.1111/j.1151-2916.1986.tb07441.x ↗
43. In vitro degradation behavior of porous calcium phosphates under diametral compression loading10.1016/j.ceramint.2004.08.007 ↗
44. Mechanical properties of hydroxyapatite formed at physiological temperature10.1007/BF00120289 ↗
45. Note on the use of the diametral compression test for the strength measurement of ceramics10.1007/BF00720340 ↗
46. Measurement of tensile strength by diametral compression of discs and annuli10.1016/0013-7952(71)90001-9 ↗
47. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
48. Shape sensitivity of initial sintering equations10.1111/j.1151-2916.1968.tb13319.x ↗
49. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress10.1016/0142-9612(95)98272-G ↗
50. Compression strength of porous sintered alumina and zirconia, 9th communication to ceramography10.1111/j.1151-2916.1953.tb12837.x ↗
51. Mechanical behaviour of porous hydroxyapatite10.1016/j.actbio.2007.11.002 ↗
52. Brittle fracture in compression: mechanisms, models and criteria10.1016/0013-7944(95)00069-8 ↗
53. Elastic properties of model porous ceramics10.1111/j.1151-2916.2000.tb01680.x ↗
54. Continuum fracture mechanics of uniaxial compression on brittle materials10.1016/S0020-7683(97)00318-1 ↗
55. Development of damage state in porous ceramics under compression10.1016/j.commatsci.2007.07.041 ↗
56. Prediction of the mechanical behaviour of porous ceramics using mesomechanical modelling10.1016/j.commatsci.2003.08.008 ↗
57. Green · 1998
58. The brittle strength of orthotropic materials10.1177/002199836700100210 ↗
59. Gebhardt · 2003
60. Albright JA, Brand RA, editors. The scientific basis of orthopaedics, 1st ed. New York: Appleton-Century-Crofts; 1979.
61. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures10.1016/S0142-9612(01)00243-5 ↗
62. Mechanical properties of calcium phosphate scaffolds fabricated by robocasting10.1002/jbm.a.31587 ↗
63. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.06.028 ↗
64. Preparation of porous hydroxyapatite10.1023/A:1017935411108 ↗
65. Freeze-cast hydroxyapatite scaffolds for bone tissue engineering applications10.1088/1748-6041/3/2/025005 ↗