Fabrication of macromolecular gradients in aligned fiber scaffolds using a combination of in-line blending and air-gap electrospinning
Source abstract
Abstract
Although a variety of fabrication methods have been developed to generate electrospun meshes with gradient properties, no platform has yet to achieve fiber alignment in the direction of the gradient that mimics the native tendon-bone interface. In this study, we present a method combining in-line blending and air-gap electrospinning to address this limitation in the field. A custom collector with synced rotation permitted fiber collection with uniform mesh thickness and periodic copper wires were used to induce fiber alignment. Two poly(ester urethane ureas) with different hard segment contents (BPUR 50, BPUR 10) were used to generate compositional gradient meshes with and without fiber alignment. The compositional gradient across the length of the mesh was characterized using a fluorescent dye and the results indicated a continuous transition from the BPUR 50 to the BPUR 10. As expected, the fiber alignment of the gradient meshes induced a corresponding alignment of adherent cells in static culture. Tensile testing of the sectioned meshes confirmed a graded transition in mechanical properties and an increase in anisotropy with fiber alignment. Finite element modeling was utilized to illustrate the gradient mechanical properties across the full length of the mesh and lay the foundation for future computational development work. Overall, these results indicate that this electrospinning method permits the fabrication of macromolecular gradients in the direction of fiber alignment and demonstrate its potential for use in interfacial tissue engineering. Statement of significance The native tendon-bone interface contains a gradient of properties that ensures stability of the joint. Without this transition, failure can occur due to stress concentration at the bone insertion site. Electrospinning is a method commonly used to produce fibrous grafts with gradient properties; however, no current method allows for gradients in the direction of fiber alignment. This work details a novel electrospinning method to produce gradients in the direction of fiber alignment in order to better mimic transitional zones and improve regeneration of the tendon-bone interface. In addition to the biomechanical gradients demonstrated here, this method may also be used to generate gradients of macromolecular, biochemical, and cellular cues with broad potential utility in tissue engineering.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tendon Structure and Treatment · Electrospun Nanofibers in Biomedical Applications · Silk-based biomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Engineering orthopedic tissue interfaces10.1089/ten.teb.2008.0371 ↗
2. Soft tissue fixation to bone10.1177/036354658601400512 ↗
3. Lu · 2005 · 91
4. Orthopedic interface tissue engineering for the biological fixation of soft tissue grafts10.1016/j.csm.2008.08.006 ↗
5. Stress distribution in the supraspinatus tendon after tendon repair suture anchors versus transosseous suture fixation10.1177/0363546506296310 ↗
6. The histology of tendon attachments to bone in man
7. Tendon and ligament insertion10.2106/00004623-197052010-00001 ↗
8. Variation of biomechanical, structural, and compositional properties along the tendon to bone insertion site10.1016/S0736-0266(03)0057-3 ↗
9. Nanofiber scaffolds with gradations in mineral content for mimicking the tendon-to-bone insertion site10.1021/nl901582f ↗
10. Bio-inspired interfacial strengthening strategy through geometrically interlocking designs10.1016/j.jmbbm.2012.07.006 ↗
11. The concentration of stress at the rotator cuff tendon-to-bone attachment site is conserved across species10.1016/j.jmbbm.2016.04.025 ↗
12. Mechanisms of bimaterial attachment at the interface of tendon to bone10.1115/1.4002641 ↗
13. Design of a multiphase osteochondral scaffold III: Fabrication of layered scaffolds with continuous interfaces10.1002/jbm.a.32387 ↗
14. Bi-material attachment through a compliant interfacial system at the tendon-to-bone insertion site10.1016/j.mechmat.2011.08.005 ↗
15. Ramakrishna · 2005
16. In situ crosslinking of electrospun gelatin for improved fiber morphology retention and tunable degradation10.1039/C5TB00937E ↗
17. J. Doshi, D.H. Reneker, Electrospinning process and applications of electrospun fibers. Industry Applications Society Annual Meeting, 1993, Conference Record of the 1993 IEEE: IEEE, 1993, pp. 1698–703.10.1109/IAS.1993.299067 ↗
18. New directions in nanofibrous scaffolds for soft tissue engineering and regeneration10.1586/erd.09.39 ↗
19. Fiber alignment directs cell motility over chemotactic gradients10.1002/bit.24788 ↗
20. Functionally graded electrospun polycaprolactone and β-tricalcium phosphate nanocomposites for tissue engineering applications10.1016/j.biomaterials.2008.06.022 ↗
21. A facile method for preparation of polycaprolactone/tricalcium phosphate fibrous matrix with a gradient mineral content10.1016/j.colsurfa.2013.03.063 ↗
22. Gradient fiber electrospinning of layered scaffolds using controlled transitions in fiber diameter10.1016/j.biomaterials.2013.03.033 ↗
23. The potential to improve cell infiltration in composite fiber-aligned electrospun scaffolds by the selective removal of sacrificial fibers10.1016/j.biomaterials.2008.01.032 ↗
24. Flexible generation of gradient electrospinning nanofibers using a microfluidic assisted approach10.1021/la300821r ↗
25. Co-electrospun dual scaffolding system with potential for muscle–tendon junction tissue engineering10.1016/j.biomaterials.2010.10.038 ↗
26. Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament–bone interface10.1016/j.actbio.2011.07.008 ↗
27. Gradients with depth in electrospun fibrous scaffolds for directed cell behavior10.1021/bm200415g ↗
28. Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors10.1016/j.actbio.2012.01.003 ↗
29. Incorporating protein gradient into electrospun nanofibers as scaffolds for tissue engineering10.1021/am9007962 ↗
30. The regulation of tendon stem cell differentiation by the alignment of nanofibers10.1016/j.biomaterials.2009.11.083 ↗
31. Two pole air gap electrospinning: fabrication of highly aligned, three-dimensional scaffolds for nerve reconstruction10.1016/j.actbio.2010.08.004 ↗
32. “Aligned-to-random” nanofiber scaffolds for mimicking the structure of the tendon-to-bone insertion site10.1039/c0nr00192a ↗
33. Continuous electrospinning of aligned polymer nanofibers onto a wire drum collector10.1021/nl0486158 ↗
34. Preliminary investigation of airgap electrospun silk-fibroin-based structures for ligament analogue engineering10.1163/092050610X504251 ↗
35. Use of an insulating mask for controlling anisotropy in multilayer electrospun scaffolds for tissue engineering10.1039/c0jm01880e ↗
36. Electrospun polyurethane and hydrogel composite scaffolds as biomechanical mimics for aortic valve tissue engineering10.1021/acsbiomaterials.6b00309 ↗
37. Comparison of clinical explants and accelerated hydrolytic aging to improve biostability assessment of silicone-based polyurethanes10.1002/jbm.a.35709 ↗
38. Electrospun vascular grafts with improved compliance matching to native vessels10.1002/jbm.b.33201 ↗
39. Bonet · 1997
40. G. Hamed, in: A.N. Gent (Ed.) Engineering with Rubber; How to Design Rubber Components, 2001.
41. Electrospun poly (ɛ-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering10.1016/j.biomaterials.2008.08.007 ↗
42. Engineered human skin fabricated using electrospun collagen–PCL blends: morphogenesis and mechanical properties10.1089/ten.tea.2008.0473 ↗
43. Aligned multilayered electrospun scaffolds for rotator cuff tendon tissue engineering10.1016/j.actbio.2015.06.010 ↗
44. Nanofiber alignment and direction of mechanical strain affect the ECM production of human ACL fibroblast10.1016/j.biomaterials.2004.04.037 ↗
45. The influence of electrospun aligned poly (epsilon-caprolactone)/collagen nanofiber meshes on the formation of self-aligned skeletal muscle myotubes10.1016/j.biomaterials.2008.03.031 ↗
46. Effect of fiber diameter and alignment of electrospun polyurethane meshes on mesenchymal progenitor cells10.1089/ten.tea.2008.0295 ↗
47. Dynamic tensile loading improves the functional properties of mesenchymal stem cell-laden nanofiber-based fibrocartilage10.1089/ten.tea.2010.0535 ↗
48. The guidance of stem cell differentiation by substrate alignment and mechanical stimulation10.1016/j.biomaterials.2012.11.012 ↗
49. Physical cues of biomaterials guide stem cell differentiation fate10.1021/cr300426x ↗
50. Stiffness gradients mimicking in vivo tissue variation regulate mesenchymal stem cell fate10.1371/journal.pone.0015978 ↗
51. Cyclic mechanical preconditioning improves engineered muscle contraction10.1089/tea.2007.0104 ↗
52. Mechanical conditioning of cell-seeded small intestine submucosa: a potential tissue-engineering strategy for tendon repair10.1089/ten.2006.0050 ↗
53. Humphrey · 2004
54. Effects of hydroxyapatite-containing composite nanofibers on osteogenesis of mesenchymal stem cells in vitro and bone regeneration in vivo10.1021/am302146w ↗
55. Chondrogenic differentiation of adipose-derived adult stem cells by a porous scaffold derived from native articular cartilage extracellular matrix10.1089/ten.tea.2008.0253 ↗
56. Multilayered electrospun scaffolds for tendon tissue engineering10.1089/ten.tea.2013.0165 ↗