journal article·2019-01

Antimicrobial coatings prepared from Dhvar-5-click-grafted chitosan powders

Mariana Barbosa, Fabíola Costa, Cláudia Monteiro, Filipa Duarte, M. Cristina L. Martins, Paula Gomes

Acta Biomaterialia· Volume 84
Publisher page

Abstract

Antimicrobial peptides (AMP) are powerful components of the innate immune system, as they display wide activity spectrum and low tendency to induce pathogen resistance. Hence, the development of AMP-based coatings is a very promising strategy to prevent biomaterials-associated infections. This work aims to investigate if Dhvar-5-chitosan conjugates, previously synthesized by us via azide-alkyne "click" reaction, can be applied as antimicrobial coatings. Ultrathin coatings were prepared by spin coater after dissolving Dhvar-5-chitosan conjugate powder in aqueous acetic acid. Peptide orientation and exposure from the surface was confirmed by ellipsometry and contact angle measurements. Bactericidal activity was evaluated against Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, the most prevalent pathogens in implant-associated infections. Results showed that Dhvar-5-chitosan coatings displayed bactericidal effect. Moreover, since Dhvar-5 has head-to-tail amphipathicity, it was clear that the bactericidal potency was dependent on which domain of the peptide (cationic or hydrophobic) was exposed. In this context, Dhvar-5 immobilized through its C-terminus (exposing its hydrophobic end) presented higher antimicrobial activity against Gram-positive bacteria and reduced adhesion of Gram-negative bacteria. This orientation-dependent antimicrobial activity was further corroborated by the anti-biofilm assay, as covalent immobilization of Dhvar-5 through its C-terminus provided anti-biofilm properties to the chitosan thin film. Immobilization of Dhvar-5 showed no cytotoxic effect against HFF-1 cells, as both metabolic activity and cell morphology were similar to control. In conclusion, Dhvar-5-chitosan coatings are promising antimicrobial surfaces without cytotoxic effects against human cells. STATEMENT OF SIGNIFICANCE: AMP-tethering onto ground biomaterial is still a poorly explored strategy in research. In this work, AMP-tethered ground chitosan is used to produce highly antibacterial ultrathin films. Powdered AMP-tethered chitosan appears as an alternative solution for antimicrobial devices production, as it is suitable for large scale production, being easier to handle for fabrication of different coatings and materials with antimicrobial properties and without inducing toxicity.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Antimicrobial Peptides and Activities · Antimicrobial agents and applications · Peptidase Inhibition and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. The emergence and evolution of antimicrobial resistance: impact on a global scale10.1016/j.bmc.2016.04.027 ↗
2. Biofilm formation by clinical isolates and the implications in chronic infections10.1186/1471-2334-13-47 ↗
3. Therapeutic strategies to combat antibiotic resistance10.1016/j.addr.2014.10.027 ↗
4. Biomaterials approaches to treating implant-associated osteomyelitis10.1016/j.biomaterials.2015.12.012 ↗
5. Biofilm formation in Staphylococcus implant infections a review of molecular mechanisms and implications for biofilm-resistant materials10.1016/j.biomaterials.2012.05.031 ↗
6. Biofilm formation: a clinically relevant microbiological process10.1086/322972 ↗
7. Introduction to biofilm10.1016/S0924-8579(99)00018-7 ↗
8. Bacterial biofilm development as a multicellular adaptation: antibiotic resistance and new therapeutic strategies10.1016/j.mib.2013.06.013 ↗
9. Chronic wound infections: the role of Pseudomonas aeruginosa and Staphylococcus aureus10.1586/14787210.2015.1023291 ↗
10. The immunology of host defence peptides: beyond antimicrobial activity10.1038/nri.2016.29 ↗
11. Intracellular targeting mechanisms by antimicrobial peptides10.1128/AAC.02340-16 ↗
12. Antimicrobial properties of membrane-active dodecapeptides derived from MSI-7810.1016/j.bbamem.2015.02.001 ↗
13. A 17-mer membrane-active MSI-78 derivative with improved selectivity toward bacterial cells10.1021/acs.molpharmaceut.5b00113 ↗
14. Deciphering the mode of action of the synthetic antimicrobial peptide Bac8c10.1128/AAC.01053-10 ↗
15. Antimicrobial peptides: linking partition, activity and high membrane-bound concentrations10.1038/nrmicro2095 ↗
16. The mechanism of action of antimicrobial peptides: lipid vesicles vs bacteria10.3389/fimmu.2012.00236 ↗
17. Histatin and lactoferrin derived peptides: antimicrobial properties and effects on mammalian cells10.1016/j.peptides.2005.05.014 ↗
18. The effect of the antimicrobial peptide, Dhvar-5, on gentamicin release from a polymethyl methacrylate bone cement10.1016/j.biomaterials.2005.01.036 ↗
19. Effects of histatin 5 and derived peptides on Candida albicans10.1042/bj3560361 ↗
20. In, vivo comparison of Dhvar-5 and gentamicin in an MRSA osteomyelitis prevention model10.1093/jac/dkh441 ↗
21. Interactions of histatin 5 and histatin 5-derived peptides with liposome membranes: surface effects, translocation and permeabilization10.1042/bj20031785 ↗
22. Chemical immobilization of antimicrobial peptides on biomaterial surfaces10.2741/s453 ↗
23. Covalent immobilization of antimicrobial peptides (AMPs) onto biomaterial surfaces10.1016/j.actbio.2010.11.005 ↗
24. THPdb: database of FDA-approved peptide and protein therapeutics10.1371/journal.pone.0181748 ↗
25. Dhvar5 antimicrobial peptide (AMP) chemoselective covalent immobilization results on higher antiadherence effect than simple physical adsorption10.1016/j.biomaterials.2015.02.049 ↗
26. Antimicrobial GL13K peptide coatings killed and ruptured the wall of Streptococcus Gordonii and prevented formation and growth of biofilms
27. Tethering antimicrobial peptides: current status and potential challenges10.1016/j.biotechadv.2010.08.012 ↗
28. Facile regioselective synthesis of a novel chitosan-pexiganan conjugate with potential interest for the treatment of infected skin lesions10.1080/00397910802517855 ↗
29. Antimicrobial peptide shows enhanced activity and reduced toxicity upon grafting to chitosan polymers10.1039/C5CC04010H ↗
30. Cationic peptidopolysaccharides show excellent broad-spectrum antimicrobial activities and high selectivity10.1002/adma.201104186 ↗
31. Antibacterial polypeptide-grafted chitosan-based nanocapsules as an “armed” carrier of anticancer and antiepileptic drugs10.1021/mz400480z ↗
32. Cu-catalyzed azide− alkyne cycloaddition10.1021/cr0783479 ↗
33. The copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) “click” reaction and its applications an overview10.1016/j.ccr.2011.06.028 ↗
34. Tethering antimicrobial peptides onto chitosan: optimization of azide-alkyne “click” reaction conditions10.1016/j.carbpol.2017.02.050 ↗
35. Chemical modification of chitosan by phosphorylation: an XPS, FT-IR and SEM study10.1163/156856205774576736 ↗
36. human serum albumin adsorption on TiO2 from single protein solutions and from plasma10.1021/la049158d ↗
37. Protein adsorption on mixtures of hydroxyl- and methyl-terminated alkanethiols self-assembled monolayers10.1002/jbm.a.10096 ↗
38. Effect of gastric environment on helicobacter pylori adhesion to a mucoadhesive polymer10.1016/j.actbio.2012.09.011 ↗
39. Interactions between chitosan and SDS at a low-charged silica substrate compared to interactions in the bulk the effect of ionic strength10.1021/la702653m ↗
40. Measuring hydrophilicity of RO membranes by contact angles via sessile drop and captive bubble method: a comparative study10.1016/j.desal.2012.07.006 ↗
41. Free-standing polysaccharide composite films: improved preparation and physical properties10.1016/j.colsurfa.2015.07.033 ↗
42. A sensitive fluorometric method for the determination of arginine using 9,10-phenanthrenequinone10.1016/0003-2697(78)90029-5 ↗
43. Antimicrobial peptides on calcium phosphate-coated titanium for the prevention of implant-associated infections10.1016/j.biomaterials.2010.08.035 ↗
44. In vitro and in vivo antimicrobial activity of covalently coupled quaternary ammonium silane coatings on silicone rubber10.1016/S0142-9612(01)00263-0 ↗
45. Agar and broth dilution methods to determine the minimal inhibitory concentration (MIC) of antimicrobial substances10.1038/nprot.2007.521 ↗
46. Antimicrobial activity of synthetic salivary peptides against voice prosthetic microorganisms10.1097/00005537-200002010-00027 ↗
47. Histatin-derived monomeric and dimeric synthetic peptides show strong bactericidal activity towards multidrug-resistant staphylococcus aureus in vivo10.1128/AAC.00196-07 ↗
48. Peptide antibiotics10.1128/AAC.43.6.1317 ↗
49. Arginine-rich self-assembling peptides as potent antibacterial gels10.1016/j.biomaterials.2012.08.046 ↗
50. Role of arginine and lysine in the antimicrobial mechanism of histone-derived antimicrobial peptides10.1016/j.febslet.2015.11.002 ↗
51. The different interactions of lysine and arginine side chains with lipid membranes10.1021/jp405418y ↗
52. The Pharmacophore of short cationic antibacterial peptides10.1021/jm0340039 ↗
53. Anti-biofilm properties of chitosan-coated surfaces10.1163/156856208784909372 ↗
54. Modulation of stability and mucoadhesive properties of chitosan microspheres for therapeutic gastric application10.1016/j.ijpharm.2013.06.068 ↗
55. Why is chitosan mucoadhesive?10.1021/bm800276d ↗
56. Multistage pH-responsive mucoadhesive nanocarriers prepared by aerosol flow reactor technology: a controlled dual protein-drug delivery system10.1016/j.biomaterials.2015.07.045 ↗
57. Macrophage polarization following chitosan implantation10.1016/j.biomaterials.2013.09.012 ↗
58. Antioxidant activity of water-soluble chitosan derivatives10.1016/S0960-894X(01)00285-2 ↗
59. Attachment, spreading and short-term proliferation of human osteoblastic cells cultured on chitosan films with different degrees of acetylation10.1163/156856207780425068 ↗
60. Rat bone marrow stromal cell osteogenic differentiation and fibronectin adsorption on chitosan membranes: the effect of the degree of acetylation10.1002/jbm.a.30436 ↗
61. Attachment, spreading, and adhesion strength of human bone marrow cells on chitosan10.1007/s10439-010-0188-y ↗
62. Biological fixation of fibrous materials to bone using chitin/chitosan as a bone formation accelerator10.1002/jbm.b.31177 ↗
63. Fibrinogen promotes resorption of chitosan by human osteoclasts10.1016/j.actbio.2013.01.015 ↗
64. In vitro and in vivo degradation of films of chitin and its deacetylated derivatives10.1016/S0142-9612(96)00167-6 ↗
65. Biodegradation and distribution of water-soluble chitosan in mice10.1016/S0142-9612(98)00159-8 ↗
66. “Click” immobilization on alkylated silicon substrates: model for the study of surface bound antimicrobial peptides
67. Immobilization of antimicrobial peptide IG-25 onto fluoropolymers via fluorous interactions and click chemistry10.1021/am404591n ↗
68. Multi-biofunctionalization of a titanium surface with a mixture of peptides to achieve excellent antimicrobial activity and biocompatibility10.1039/C4TB01318B ↗
69. A review of the antimicrobial activity of chitosan10.1590/S0104-14282009000300013 ↗
70. Antibacterial effects of chitosan powder: mechanisms of action10.1080/09593332808618893 ↗
71. Antimicrobial properties of chitosan and mode of action: a state of the art review10.1016/j.ijfoodmicro.2010.09.012 ↗
72. Synthesis of an O-alkynyl-chitosan and its chemoselective conjugation with a PEG-like amino-azide through click chemistry10.1016/j.carbpol.2011.07.043 ↗
73. Surface energy of experimental and commercial nanofiltration membranes: effects of wetting and natural organic matter fouling10.1016/S0376-7388(00)00409-9 ↗
74. Endothelium regeneration on luminal surface of polyurethane vascular scaffold modified with diamine and covalently grafted with gelatin10.1016/S0142-9612(03)00549-0 ↗
75. Histatin 5 and derivatives: their localization and effects on the ultra-structural level10.1016/S0196-9781(02)00076-1 ↗
76. Screening and characterization of surface-tethered cationic peptides for antimicrobial activity10.1016/j.chembiol.2008.11.006 ↗
77. Structure, function and contribution of polysaccharide intercellular adhesin (PIA) to Staphylococcus epidermidis biofilm formation and pathogenesis of biomaterial-associated infections10.1016/j.ejcb.2009.10.005 ↗
78. Towards the cell-instructive bactericidal substrate: exploring the combination of nanotopographical features and integrin selective synthetic ligands10.1038/s41598-017-16385-3 ↗
79. Detergent-like actions of linear amphipathic cationic antimicrobial peptides10.1016/j.bbamem.2006.07.001 ↗
80. Characterization of chemoselective surface attachment of the cationic peptide melimine and its effects on antimicrobial activity10.1016/j.actbio.2012.07.029 ↗
81. Immobilization studies of an engineered arginine-tryptophan-rich peptide on a silicone surface with antimicrobial and antibiofilm activity10.1021/am401629p ↗
82. Proposed mechanisms of tethered antimicrobial peptide chrysophsin-1 as a function of tether length using QCM-D10.1021/acs.jpcb.5b06883 ↗
83. Biomembrane interactions reveal the mechanism of action of surface-immobilized host defense IDR-1010 peptide10.1016/j.chembiol.2011.12.015 ↗
84. Replacement of the CysA7-CysB7 disulfide bond with a 1,2,3-triazole linker causes unfolding in insulin glargine10.1039/C5OB00160A ↗
85. Maintaining biological activity by using triazoles as disufide bond mimetics10.1002/anie.201005846 ↗
86. Identification of antimicrobial peptides and immobilization strategy suitable for a covalent surface coating with biocompatible properties10.1021/bc4004469 ↗
87. Toward infection-resistant surfaces: achieving high antimicrobial peptide potency by modulating the functionality of polymer brush and peptide10.1021/acsami.5b10074 ↗
88. Click chemistry in peptide-based drug design10.3390/molecules18089797 ↗
89. Grafting techniques towards production of peptide-tethered hydrogels, a novel class of materials with biomedical interest10.3390/gels1020194 ↗
90. Antimicrobial peptides: review of their application in musculoskeletal infections10.1016/j.injury.2006.04.007 ↗