A novel two-level microstructured poly(N-isopropylacrylamide) hydrogel for controlled release
Source abstract
Abstract
The aim of this work was to demonstrate that conventional poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can improve their shrinkage and release properties solely due to the introduction of a heterogeneous density fluctuation-based microstructure. To this end, a novel structurally engineered PNIPAAm hydrogel was designed and compared with a chemically similar, but homogeneous, PNIPAAm hydrogel reference. For the two-step preparation PNIPAAm microgels were firstly synthesized with surface amine groups and further functionalized with polymerizable acrylate groups. In the second step the microgels, themselves acting as crosslinkers, were crosslinked to form a bulk network by inter-connecting the microgels with linear PNIPAAm chains. Although the chemical composition of the newly prepared hydrogel was generally the same as conventional PNIPAAm hydrogels (a relative control), significantly improved shrinkage properties and a more efficient "on-off" switching induced by temperature modulations were observed for the novel gel as compared with the homogeneous reference. These improved shrinkage properties were ascribed to the novel structure, which is believed to enable rapid shrinking of the small microgel crosslinkers and, thereupon, the generation of a sufficient number of diffusion channels for quick water release. Rhodamine B and ibuprofen (IBU) as model compounds were completely released from this novel gel at 20 degrees C, whereas at temperatures above the lower critical solution temperature release stopped after initial 40% and 70% "bursts" for rhodamine B and IBU, respectively, due to shrinkage of the gel network. This approach may provide an avenue to design temperature-sensitive drug delivery systems with state of the art switching properties and fast release kinetics by combining the here presented innovative strategy with complementary enhancements, such as the introduction of porosity.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogels: synthesis, properties, applications · 3D Printing in Biomedical Research · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Hydrogels in pharmaceutical formulations10.1016/S0939-6411(00)00090-4 ↗
2. Smart polymeric gels: redefining the limits of biomedical devices10.1016/j.progpolymsci.2007.05.018 ↗
3. Thermoresponsive hydrogels in biomedical applications10.1016/j.ejpb.2007.02.025 ↗
4. The formation of crystalline hydrogel films by self-crosslinking microgels10.1039/b814830a ↗
5. Poly(N-isopropylacrylamide) nanoparticle-incorporated PNIPAAm hydrogels with fast shrinking kinetics10.1002/marc.200500298 ↗
6. Poly(N-isopropylacrylamide): experiment, theory and application10.1016/0079-6700(92)90023-R ↗
7. Hydrogel nanocomposites as remote-controlled biomaterials10.1016/j.actbio.2007.07.009 ↗
8. Engineering cell de-adhesion dynamics on thermoresponsive poly(N-isopropylacrylamide)10.1016/j.actbio.2007.09.002 ↗
9. In vitro analysis of PNIPAAm–PEG, a novel, injectable scaffold for spinal cord repair10.1016/j.actbio.2008.10.008 ↗
10. Hydrogels in biology and medicine: from molecular principles to bionanotechnology10.1002/adma.200501612 ↗
11. Temperature-responsive cell culture surfaces for regenerative medicine with cell sheet engineering10.1016/j.progpolymsci.2007.06.002 ↗
12. Porous thermoresponsive-co-biodegradable hydrogels as tissue-engineering scaffolds for 3-dimensional in vitro culture of chondrocytes10.1089/ten.2007.0084 ↗
13. Physically bonded nanoparticle networks: a novel drug delivery system10.1016/j.jconrel.2004.11.016 ↗
14. A novel sol–gel strategy to prepare temperature-sensitive hydrogel for encapsulation of protein10.1007/s00396-005-1357-7 ↗
15. Subconjunctivally implantable hydrogels with degradable and thermoresponsive properties for sustained release of insulin to the retina10.1016/j.biomaterials.2009.08.025 ↗
16. Poly(N-isopropylacrylamide-co-acrylamide) cross-linked thermoresponsive microspheres obtained from preformed polymers: influence of the physico-chemical characteristics of drugs on their release profiles10.1016/j.actbio.2008.07.011 ↗
17. Preparation of temperature-sensitive poly(N-isopropylacrylamide)/beta-cyclodextrin-grafted polyethylenimine hydrogels for drug delivery10.1002/app.27931 ↗
18. Controlled release from and tissue response to physically bonded hydrogel nanoparticle assembly10.1002/masy.200550927 ↗
19. Temperature sensitive poly[N-isopropylacrylamide-co-(acryloyl beta-cyclodextrin)] for improved drug release10.1002/mabi.200400167 ↗
20. A liquid template method to prepare porous poly(N-isopropylacrylamide) hydrogel with superfast shrinking kinetics10.1002/marc.200700778 ↗
21. Temperature-sensitive poly(N-isopropylacrylamide) hydrogels with macroporous structure and fast response rate10.1002/marc.200390061 ↗
22. Rapid deswelling of porous poly(N-isopropylacrylamide) hydrogels prepared by incorporation of silica particles10.1021/ma011362+ ↗
23. Synthesis and characterization of thermally reversible macroporous poly(N-isopropylacrylamide) hydrogels10.1002/pola.1992.080301005 ↗
24. Preparation of macroporous poly(N-isopropylacrylamide) hydrogel with improved temperature sensitivity10.1002/pola.10785 ↗
25. Macroporous poly(N-isopropylacrylamide) hydrogels with fast response rates and improved protein release properties10.1002/jbm.a.10062 ↗
26. Rapid deswelling response of poly(N-isopropylacrylamide) hydrogels by the formation of water release channels using poly(ethylene oxide) graft chains10.1021/ma971899g ↗
27. Temperature-sensitive PVA/PNIPAAm semi-IPN hydrogels with enhanced responsive properties
28. Preparation and properties of poly(N-isoproplyacrylamide)/poly(N-isopropylacrylamide) interpenetrating polymer networks for drug delivery10.1002/pola.11092 ↗
29. Poly(vinyl alcohol)/poly(N-isopropylacrylamide) semi-interpenetrating polymer network hydrogels with rapid response to temperature changes10.1007/s00396-002-0829-2 ↗
30. A new route to crystalline hydrogels, guided by a phase diagram10.1002/anie.200351326 ↗
31. A new strategy to prepare temperature sensitive poly(N-isopropylacrylamide) microgels10.1007/s00396-008-1890-2 ↗
32. Temperature-sensitive aqueous microgels10.1016/S0001-8686(99)00023-8 ↗
33. Synthesis and study of and controlled release from nanoparticles and their networks based on functionalized hydroxypropylcellulose10.1021/ma030107h ↗
34. Thermal analysis of the volume phase transition with N-isopropylacrylamide gels10.1021/ma00203a049 ↗
35. Effect of comonomer hydrophilicity and ionization on the lower critical solution temperature of N-isopropylacrylamide copolymers10.1021/ma00062a016 ↗
36. Dependence of shell thickness on core compression in acrylic acid modified poly(N-isopropylacrylamide) core/shell microgels10.1021/la034392+ ↗
37. Tunable swelling kinetics in core-shell hydrogel nanoparticles10.1021/ja010609f ↗
38. Volume phase transition of swollen gels: discontinuous or continuous?10.1021/ma960499a ↗
39. Effect of comonomer hydrophilicity and ionization on the lower critical solution temperature of N-isopropylacrylamide copolymers10.1021/ma00062a016 ↗
40. Kinetics of swelling gels10.1063/1.437602 ↗
41. Polymer gel nanoparticle networks10.1002/1521-4095(200008)12:16<1173::AID-ADMA1173>3.0.CO;2-Z ↗
42. Micro-structured smart hydrogels with enhanced protein loading and release efficiency10.1016/j.actbio.2009.11.005 ↗
43. Implantable, polymeric systems for modulated drug delivery10.1016/S0169-409X(02)00090-X ↗