Microstructural quantification of collagen fiber orientations and its integration in constitutive modeling of the porcine carotid artery
Source abstract
Abstract
Background Mechanical characteristics of vascular tissue may play a role in different arterial pathologies, which, amongst others, requires robust constitutive descriptions to capture the vessel wall's anisotropic and non-linear properties.Specifically, the complex 3D network of collagen and its interaction with other structural elements has a dominating effect of arterial properties at higher stress levels.The aim of this study is to collect quantitative collagen organization as well as mechanical properties to facilitate structural constitutive models for the porcine carotid artery.This helps the understanding of the mechanics of swine carotid arteries, being a standard in clinical hypothesis testing, in endovascular preclinical trials for example. Method Porcine common carotid arteries (n=10) were harvested and used to (i) characterize the collagen fiber organization with polarized light microscopy, and (ii) the biaxial mechanical properties by inflation testing.The collagen organization was quantified by the Bingham orientation density function (ODF), which in turn was integrated in a structural constitutive model of the vessel wall.A one-layered and thick-walled model was used to estimate mechanical constitutive parameters by least-square fitting the recorded in vitro inflation test results.Finally, uniaxial data published elsewhere were used to validate the mean collagen organization described by the Bingham ODF. Results Thick collagen fibers, i.e.the most mechanically relevant structure, in the common carotid artery are dispersed around the circumferential direction.In addition, almost all samples showed two distinct families of collagen fibers at different elevation, but not azimuthal, angles.Collagen fiber organization could be accurately represented by the Bingham ODF (κ1,2,3=[13.5,0.0,25.2] and κ1,2,3=[14.7,0.0,26.6]; average error of about 5%), and their integration into a structural constitutive model captured the inflation characteristics of individual carotid artery samples.Specifically, only four mechanical parameters were required to reasonably (average error from 14% to 38%) cover the experimental data over a wide range of axial and circumferential stretches.However, it was critical to account for fibrilar links between thick collagen fibers.Finally, the mean Bingham ODF provide also good approximation to uniaxial experimental data. Conclusions The applied structural constitutive model, based on individually measured collagen orientation densities, was able to capture the biaxial properties of the common carotid artery. Since the model required coupling amongst thick collagen fibers, the collagen fiber orientations measured from polarized light microscopy, alone, seem to be insufficient structural information. Alternatively, a larger dispersion of collagen fiber orientations, that is likely to arise from analyzing larger wall sections, could have had a similar effect, i.e. could have avoided coupling amongst thick collagen fibers. Statement of significance The applied structural constitutive model, based on individually measured collagen orientation densities, was able to capture the biaxial and uniaxial properties of the common carotid artery. Since the model required coupling amongst thick collagen fibers, an effective orientation density that accounts for cross-links between the main collagen fibers has been porposed. The model provides a good approximation to the experimental data.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Cardiovascular Health and Disease Prevention · Coronary Interventions and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Anisotropic micro-sphere-based finite elasticity applied to blood vessel modelling10.1016/j.jmps.2008.09.005 ↗
2. On the use of bingham statistical distribution in microsphere-based constitutive models of arterial tissue10.1016/j.mechrescom.2010.10.001 ↗
3. Review. biomechanical factors in the biology of aortic wall and aortic valve diseases10.1093/cvr/cvt040 ↗
4. An antipodally symmetric distribution on the sphere10.1214/aos/1176342874 ↗
5. Borradaile · 2003
6. Measurements from light and polarised light microscopy of human coronary arteries fixed at distending pressure10.1093/cvr/23.11.973 ↗
7. Regional structural and biomechanical alternations of the ovine main pulmonary artery during postnatal growth10.1115/1.4023389 ↗
8. Three-dimensional collagen organization of human brain arteries at different transmural pressures10.1159/000159104 ↗
9. Fung · 1993
10. Elasticity of soft tissues in simple elongation10.1152/ajplegacy.1967.213.6.1532 ↗
11. Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis. Implications in animal cardiovascular device trials10.1016/j.medengphy.2011.01.016 ↗
12. Spatial orientation of collagen fibers in the abdominal aortic aneurysm’s wall and its relation to wall mechanics10.1016/j.actbio.2012.04.044 ↗
13. Hyperelastic modelling of arterial layers with distributed collagen fibre orientations10.1098/rsif.2005.0073 ↗
14. Constructing fully symmetric cubature formulae for the sphere10.1090/S0025-5718-00-01198-4 ↗
15. Experimentally validated microstructural 3D constitutive model of coronary arterial media
16. A new constitutive framework for arterial wall mechanics and a comparative study of material models10.1023/A:1010835316564 ↗
17. Mechanics of the arterial wall: Review and directions10.1615/CritRevBiomedEng.v23.i1-2.10 ↗
18. Humphrey · 2002
19. A structural theory for the homogeneous biaxial stress-strain relationship in flat collageneous tissues10.1016/0021-9290(79)90027-7 ↗
20. Two-dimensional mechanical properties of rabbit skin-I. Experimental system10.1016/0021-9290(74)90067-0 ↗
21. Regional differences in mechanical properties between major arteries: an experimental study in sheep10.1016/S1078-5884(96)80105-5 ↗
22. An algorithm for least-squares estimation of nonlinear parameters10.1137/0111030 ↗
23. A constitutive model for vascular tissue that integrates fibril, fiber and continuum levels10.1016/j.jbiomech.2011.07.015 ↗
24. Biaxial testing of membrane biomaterials: testing equipment and procedures10.1115/1.2894887 ↗
25. The three-dimensional micro- and nanostructure of the aortic medial lamellar unit measured using 3D confocal and electron microscopy imaging10.1016/j.matbio.2007.10.008 ↗
26. Structure-based constitutive model can accurately predict planar biaxial properties of aortic wall tissue10.1016/j.actbio.2014.11.043 ↗
27. Automatic identification and validation of planar collagen organization in the aorta wall with application to abdominal aortic aneurysm10.1017/S1431927613013251 ↗
28. Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy10.1007/s10237-011-0325-z ↗
29. The reason for the shape of the distensibility curve of arteries10.1139/y57-080 ↗
30. A structural approach including the behavior of collagen cross-links to model patient-specific human carotid arteries10.1007/s10439-014-0995-7 ↗
31. Determination of the layer-specific distributed collagen fiber orientations in human thoracic and abdominal aortas and common iliac arteries10.1098/rsif.2011.0727 ↗
32. Mechanical behavior of vessel wall: a comparative study of aorta, vena cava, and carotid artery10.1114/1.1581287 ↗
33. A passive strain-energy function for elastic and muscular arteries: correlation of material parameters with histological data10.1007/s11517-010-0598-x ↗
34. Differential histomechanical response of carotid artery in relation to species and region: mathematical description accounting for elastin and collagen anisotropy10.1007/s11517-011-0784-5 ↗
35. Biaxial mechanical properties of intact and layer-dissected human carotid arteries at physiological and supra-physiological loadings10.1152/ajpheart.00378.2009 ↗
36. Taber · 2004
37. A strain energy function for arteries accounting for wall composition and structure10.1016/j.bpj.2012.04.035 ↗
38. Analysis of the passive mechanical properties of rat carotid arteries10.1016/0021-9290(83)90080-5 ↗
39. A strain energy function for arteries accounting for wall composition and structure10.1016/j.jbiomech.2003.11.026 ↗
40. A constitutive formulation of arterial mechanics including vascular smooth muscle tone10.1152/ajpheart.00094.2004 ↗
41. Are the polarization colors of picrosirius red-stained collagen determined only by the diameter of the fibers?10.1007/BF00266843 ↗
42. Immunolocalization of collagen types I and III in the arterial wall of the rat10.1007/BF01007492 ↗
43. The layered fabric of cerebral artery fenestrations10.1161/01.STR.25.9.1799 ↗
44. Fabric organization of the subendothelium of the human brain artery by polarized-light microscopy10.1161/01.ATV.11.3.681 ↗
45. M. Landuyt, Structural quantification of collagen fibers in abdominal aortic aneurysms (Master thesis), KTH Solid Mechanics, Stockholm, and Department of Civil Engineering, Gent., 2006.