Preparation and characterization of MWCNT–COOH–cellulose–MgO NP nanocomposite as adsorbent for removal of methylene blue from aqueous solutions: isotherm, thermodynamic and kinetic studies
Source abstract
Abstract
In this work, MWCNT–COOH–cellulose nanocomposite was prepared with MWCNT–COOH, SOCl2 as leaving group and cellulose as an adsorbent (A1); MgO nanoparticles have been successfully coated on the surface of nanocomposite by directly adding to A1 (MWCNT–COOH–cellulose–MgO; A2), magnesium nitrate was added to A1 and MgO nanoparticles were achieved by coating indirectly on the surfaces (MWCNT–COOH–cellulose–MgO; A3). These nanocomposites (A1, A2, and A3) were used for the removal of methylene blue (MB) dye from aqueous solution. For characterization of adsorbent surfaces, the FT-IR, TEM, SEM, and XRD analysis were used. The effects of initial concentration of MB dye, contact time, and temperature on the adsorption were studied. According to the results, 55 min was selected as the optimum contact time for the removal process. The equilibrium data of adsorption were well fitted and the Langmuir (type III) model had the best agreement because it possesses high value of linear regression, high value R2, and least value of average relative error, ARE (%). Parameters of thermodynamics including enthalpy (∆H°), entropy (∆S°), and Gibbs energy (∆G°) were calculated. Kinetic data had best agreement with pseudo-second-order model. Schematic synthesis of MWCNT–COOH–cellulose–MgO NP nanocomposite as adsorbent
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Nanomaterials for catalytic reactions · Graphene and Nanomaterials Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Fu, J., Chen, Z., Wang, M., Liu, S., Zhang, J., Zhang, J., Han, R., Xu, Q.: Adsorption of methylene blue by a high-efficiency adsorbent(polydopamine microspheres): kinetics, isotherm, thermodynamics and mechanism analysis. Chem. Eng. J. 259, 53–61 (2015)10.1016/j.cej.2014.07.101 ↗
2. El Salam, HMAbd, Zaki, T.: Removal of hazardous cationic organic dyes from water using nickel-based metal-organic frameworks. Inorg. Chim. Acta 471, 203–210 (2018)10.1016/j.ica.2017.10.040 ↗
3. Gupta, V.K., Ali, I., Suhas, M.D.: Equilibrium uptake and sorption dynamics for the removal of a basic dye (basic red) using low-cost adsorbents. Colloid. Interface. Sci. 265, 257–264 (2003)10.1016/S0021-9797(03)00467-3 ↗
4. Biopolymers for dye removal via foam separation: M. Groß M. Tupinamba Lima M. Uhlig A. Ebraheme O. Roeber B. Olschewski R. von Klitzing R. Schomäcker M. Schwarze. Sep. Purif. Technol. 188, 451–457 (2017)10.1016/j.seppur.2017.07.025 ↗
5. Li, Y., Du, Q., Liu, T., Peng, X., Wang, J., Sun, J., Wang, Y., Wu, S., Wang, Z., Xia, Y., Xia, L.: Comparative study of methylene blue dye adsorption onto activated carbon, graphene oxide, and carbon nanotubes. Chem. Eng. Res. Des. 91, 361–368 (2013)10.1016/j.cherd.2012.07.007 ↗
6. Pandey, S., Ramontja, J.: Guar gum-grafted poly(acrylonitrile)-templated silica xerogel: nanoengineered material for lead ion removal. J. Anal. Sci. Technol 7, 24 (2016)10.1186/s40543-016-0103-8 ↗
7. Pandey, S.: A comprehensive review on recent developments in bentonite-based materials used as adsorbents for wastewater treatment. J. Mol. Liq. 241, 1091–1113 (2017)10.1016/j.molliq.2017.06.115 ↗
8. Wojciech, K., Agnieszka, H., Walerian, A., Ewa, M.: Adsorption of cationic dyes onto Fe@graphite core–shell magnetic nanocomposite: Equilibrium, kinetics and thermodynamics. Chem ENG Res Design. 129, 259–270 (2018)10.1016/j.cherd.2017.11.004 ↗
9. Adeyemo, A.A., Adeoye, I.O., Bello, O.S.: Adsorption of dyes using different types of clay: a review. Appl. Water Sci. 7, 543–568 (2017)10.1007/s13201-015-0322-y ↗
10. Sukanya, K., Ipsita, H., Chowdhury, M., Kanti, N.: Synthesis of hexagonal shaped nanoporous carbon for efficient adsorption of methyl orange dye. J Mol. Liquids. 234, 417–423 (2017)10.1016/j.molliq.2017.03.090 ↗
11. Seow, T.W., Lim, C.K.: Removal of dye by adsorption: a review. Int. J. Appl. Eng. Res. 11(4), 2675–2679 (2016)
12. Apurva, A., Narvekar, J.B., Fernandes, S.G., Tilve, S.G.: Adsorption behavior of methylene blue on glycerol based carbon materials. J. Env Chem Eng. 6, 1714–1725 (2018)10.1016/j.jece.2018.02.016 ↗
13. Hameed, B.H., Din, A.T.M., Ahmad, A.L.: Adsorption of methylene blue onto bamboo-based activated carbon: kinetics and equilibrium studies. J. Hazard. Mater. 141, 819–825 (2007)10.1016/j.jhazmat.2006.07.049 ↗
14. Hameed, B.H., Ahmad, A.A.: Batch adsorption of methylene blue from aqueous solution by garlic peel, an agricultural waste biomass. J. Hazard. Mater. 164, 870–875 (2009)10.1016/j.jhazmat.2008.08.084 ↗
15. Hameed, B.H., Ahmad, A.L., Latiff, K.N.A.: Adsorption of basic dye (methylene blue) onto activated carbon prepared from rattan sawdust. Dyes Pigm. 75(1), 143–149 (2007)10.1016/j.dyepig.2006.05.039 ↗
16. Adewumi, O., Folahan, A., Ezekiel, O.: Liquid phase scavenging of Cd (II) and Cu (II) ions onto novel nanoscale zero-valent manganese (nZVMn): equilibrium, kinetic and thermodynamic studies. Environ. Nanotechnol. Monit. Manage. 8, 63–72 (2017)10.1016/j.enmm.2017.05.001 ↗
17. Marrakchi, F., Auta, M., Khanday, W.A., Hameed, B.H.: High-surface-area and nitrogen-rich mesoporous carbon material from fishery waste for effective adsorption of methylene blue. Powder Technol. 321, 428–434 (2017)10.1016/j.powtec.2017.08.023 ↗
18. Konicki, W., Aleksandrzak, M., Moszyński, D., Mijowska, E.: Adsorption of anionic azo-dyes from aqueous solutions onto graphene oxide: equilibrium, kinetic and thermodynamic studies. J. Colloid Interface Sci. 496, 188–200 (2017)10.1016/j.jcis.2017.02.031 ↗
19. Chen, H., Ding, J., Wang, W., Wei, X., Lu, J.: Water adsorption characteristics of MCM-41 post-modified by Al grafting and cations doping: equilibrium and kinetics study. Adsorption. 23, 113–120 (2017)10.1007/s10450-016-9829-2 ↗
20. Sethi, J., Farooq, M., Sain, S., Sain, M., Sirviö, J.A., Illikainen, M., Oksman, K.: Water resistant nanopapers prepared by lactic acid modified cellulose nanofibers. Cellulose 25, 259–268 (2018)10.1007/s10570-017-1540-2 ↗
21. Makhado, E., Pandey, S., Nomngongo, N.P., Ramontja, J.: Preparation and characterization of xanthan gum-cl-poly(acrylic acid)/o-MWCNTs hydrogel nanocomposite as highly effective re-usable adsorbent for removal of methylene blue from aqueous solutions. J. Colloid Interface Sci. 513, 700–714 (2018)10.1016/j.jcis.2017.11.060 ↗
22. Makhado, E., Pandey, S., Nomngongo, N.P., Ramontja, J.: Fast microwave-assisted green synthesis of xanthan gum grafted acrylic acid for enhanced methylene blue dye removal from aqueous solution. Carbohydr. Polym. 176, 315–326 (2017)10.1016/j.carbpol.2017.08.093 ↗
23. Pandey, S., Ramontja, J.: Natural bentonite clay and its composites for dye removal: current state and future potential. Am. J. Chem. Appl. 3(2), 8–19 (2016)
24. Nekouei, F., Nekouei, S., Keshtpour, F., Noorizadeh, H., Wang, S.: Cr(OH)3-NPs-CNC hybrid nanocomposite: a sorbent for adsorptive removal of methylene blue and malachite green from solutions. Environ. Sciand. Pollut. Res. 24(32), 25291–25308 (2017)10.1007/s11356-017-0111-2 ↗
25. Maneerung, T., Liew, J., Dai, Y., Kawi, S., Chong, C., Wang, C.H.: Activated carbon derived from carbon residue from biomass gasification and its application for dye adsorption: Kinetics, isotherms and thermodynamic studies. Bioresour. Technol. 200, 350–359 (2016)10.1016/j.biortech.2015.10.047 ↗
26. Babaei, A.A., Khataee, A., Ahmadpour, E., Sheydaei, M., Kakavandi, B., Alaee, Z.: Optimization of cationic dye adsorption on activated spent tea: equilibrium, kinetics, thermodynamic and artificial neural network modeling. Korean J. Chem. Eng. 33(4), 1352–1361 (2016)10.1007/s11814-014-0334-6 ↗
27. Van der Lee, M.K., Van Dillen, A.J., Bitter, J.H., Jong, K.P.D.: Deposition precipitation for the preparation of carbon nanofiber supported nickel catalysts. J Am Chem Soc. 127, 13573–13582 (2005)10.1021/ja053038q ↗
28. Duman, O.: TunçS, ürkanT, BaharP, BozoğlanK: Synthesis of magnetic oxidized multiwalled carbon nanotube-κ-carrageenan-Fe3O4nanocomposite adsorbent and its application in cationic Methylene Blue dye adsorption. Carbohydr. Polym. 147, 79–88 (2016)10.1016/j.carbpol.2016.03.099 ↗
29. Srilakshmi, C., Sarafm, R.: Ag-doped hydroxyapatite as efficient adsorbent for removal of Congo red dye from aqueous solution: Synthesis, kinetic and equilibrium adsorption isotherm analysis. Microporous Mesoporous Mater. 219, 134–144 (2016)10.1016/j.micromeso.2015.08.003 ↗
30. Ahmed, M.J.: Application of agricultural based activated carbons by microwave and conventional activations for basic dye adsorption: review. J. Environ. Chem. Eng. 4(1), 89–99 (2016)10.1016/j.jece.2015.10.027 ↗
31. Putra, E.K., PranowoR, SunarsoJ, IndraswatiN, IsmadjiS: Performance of activated carbon and bentonite for adsorption of amoxicillin from wastewater: Mechanisms, isotherms and kinetics. Water Res. 43(9), 2419–2430 (2009)10.1016/j.watres.2009.02.039 ↗
32. Tanhaei, B., Ayati, A., Lahtinen, M., Sillanpaa, M.: Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studies of methyl orange adsorption. Chem. Eng. J. 259, 1–10 (2015)10.1016/j.cej.2014.07.109 ↗
33. Wei, D., Li, M., Wang, X., Han, F., Li, L., Guo, J., Ai, L., Fang, L., Liu, L., Du, B., Wei, Q.: Extracellular polymeric substances for Zn (II) binding during its sorption process onto aerobic granular sludge. J. Hazard Mater. 301, 407–415 (2016)10.1016/j.jhazmat.2015.09.018 ↗
34. Saroyan, H.S., Giannakoudakis, D.A., Sarafidis, C.S., Lazaridis, N.K., Deliyanni, E.A.: Effective impregnation for the preparation of magnetic mesoporous carbon: application to dye adsorption. J. Chem. Technol. Biotechnol. 92(8), 1899–1911 (2017)10.1002/jctb.5210 ↗
35. Mahmoud, H.R., Ibrahim, S.M., El-Molla, S.A.: Textile dye removal from aqueous solutions using cheap MgO nanomaterials: Adsorption kinetics, isotherm studies and thermodynamics. Adv. Powder Technol. 27(1), 223–231 (2016)10.1016/j.apt.2015.12.006 ↗
36. Panic, S., Guzsvány, V., Kónya, Z., Kukovecz, Á., Boskovic, G.: Kinetic, equilibrium and thermodynamic studies of thiamethoxam adsorption by multi-walled carbon nanotubes. Int. J. Environ. Sci. Technol. 14(6), 1297–1306 (2017)10.1007/s13762-016-1237-3 ↗
37. Chung, H.K., Kim, W.H., Park, J., Cho, J., Jeong, T.Y.: Park, P.K: Application of Langmuir and Freundlich isotherms to predict adsorbate removal efficiency or required amount of adsorbent. J. Ind. Eng. Chem. 28, 241–246 (2015)10.1016/j.jiec.2015.02.021 ↗
38. Rangabhashiyam, S., Anu, N., Giri Nandagopal, M.S., Selvaraju, N.: Relevance of isotherm models in biosorption of pollutants by agricultural byproducts. J. Environ. Chem. Eng. 2(1), 398–414 (2014)10.1016/j.jece.2014.01.014 ↗
39. Changmai, M., Purkait, M.K.: Kinetics, equilibrium and thermodynamic study of phenol adsorption using NiFe2O4 nanoparticles aggregated on PAC. J. Water Pro. Eng. 16, 90–97 (2017)10.1016/j.jwpe.2016.12.011 ↗
40. Simonin, J.P.: On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics. Chem. Eng. J. 300, 254–263 (2016)10.1016/j.cej.2016.04.079 ↗
41. Senthilkumaar, S., Kalaamani, P., Porkodi, K., Varadarajan, P.R., Subburaam, C.V.: Adsorption of dissolved reactive red dye from aqueous phase onto activated carbon prepared from agricultural waste. Bioresour. Technol. 197, 1618–1625 (2006)10.1016/j.biortech.2005.08.001 ↗
42. Siu, P.C.C., Koong, L.F., Saleem, J., Barford, J., McKay, G.: Equilibrium and kinetics of copper ions removal from wastewater by ion exchange. Chin J Chem Eng 24(1), 94–100 (2016)10.1016/j.cjche.2015.06.017 ↗
43. Han, X., Yuan, J., Ma, X.: Adsorption of malachite green from aqueous solutions onto lotus leaf: equilibrium, kinetic, and thermodynamic studies. Desalination Water Treat. 52, 5563–5574 (2014)10.1080/19443994.2013.813102 ↗
44. Pezoti Jr., O., CazettaIsis, A.L., SouzaKaren, P.A.F., Bedin Alessandro, C., Martins Tais, C., Silva Vitor, L., Almeida, C.: Adsorption studies of methylene blue onto ZnCl2-activated carbon produced from buriti shells (Mauritiaflexuosa L.). J. Ind. Eng. Chem. 20(6), 4401–4407 (2014)10.1016/j.jiec.2014.02.007 ↗
45. Zhou, C., Wu, Q., Lei, T., Negulescul, I.: Adsorption kinetic and equilibrium studies for methylene blue dye by partially hydrolyzed polyacrylamide/cellulose nanocrystal nanocomposite hydrogels. Chem. Eng. J. 251, 17–24 (2014)10.1016/j.cej.2014.04.034 ↗
46. Zhang, M.: GaoB: removal of arsenic, methylene blue, and phosphate by biochar/AlOOH nanocomposite. Chem. Eng. J. 226, 286–292 (2013)10.1016/j.cej.2013.04.077 ↗
47. Asfaram, A., Ghaedi, M., Hajati, S., Rezaeinejad, M., Goudarzi, A., Mihir Purkait, K.: Rapid removal of auramine-o and methylene blue by ZnS: Cu nanoparticles loaded on activated carbon: a response surface methodology approach. J. Taiwan Chem. Eng. 53, 80–91 (2015)10.1016/j.jtice.2015.02.026 ↗
48. MakrigianniV, GiannakasA: DeligiannakisY, KonstantinouI: Adsorption of phenol and methylene blue from aqueous solutions by pyrolytic tire char: Equilibrium and kinetic studies. J. Environ. Chem. Eng. 3, 574–582 (2015)10.1016/j.jece.2015.01.006 ↗
49. Thakur, S., Pandey, S., Arotiba, A.O.: Development of a sodium alginate-based organic/inorganic superabsorbent composite hydrogel for adsorption of methylene blue. Carbohydr. Polym. 153, 34–46 (2016)10.1016/j.carbpol.2016.06.104 ↗
50. Thakur, S., Pandey, S., Arotiba, O.A.: Sol–gel derived xanthan gum/silica nanocomposite—a highly efficient cationic dyes adsorbent in aqueous system. Int. J. Biol. Macromol. 103, 596–604 (2017)10.1016/j.ijbiomac.2017.05.087 ↗
51. Pandey, Sadan and Fosso-Kankeu, E., Ramontja, J.: Efficient and rapid adsorption characteristics of templating xanthan gum-graft-poly(aniline) and silica nanocomposite toward removal of toxic methylene blue dyes. 9th Int’l Conference on advances in science, engineering, technology & waste management (ASETWM-17) Nov. 27–28, 2017 Parys, South Africa