journal article·2023-10Open access

Modeling phosphorene and $$\hbox {MoS}2$$ interacting with iron: lubricating effects compared to graphene

Gabriele Losi, Michele Cutini, Paolo Restuccia, M. Clelia Righi

Abstract

Abstract Phosphorene, a single layer of black phosphorus, is attracting interest for several applications, among which tribology. Here, we investigate its possible use as a solid lubricant for iron-based materials by comparing its friction-reduction properties with $$\hbox {MoS}2$$ and graphene. Through first-principle calculations, we predict that phosphorene adheres more strongly to the native iron surface than the other considered 2D materials. The higher adhesion suggests that a stable and durable coverage of reactive surface regions can be obtained with phosphorene. Furthermore, our simulation uncovers the peculiar behavior of phosphorene to exfoliate into two atomic-thin layers upon interface intercalation. This capability makes phosphorene reduce the nano-asperity adhesion very efficiently thanks to the simultaneous passivation of the surface and countersurface. These results suggest that better performances could be obtained by phosphorene than other solid lubricants at low concentrations.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · MXene and MAX Phase Materials · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. International Energy Agency: Energy Technology Perspectives 2020 - Special report on clean energy innovation, pp. 185. OECD, (2020)
2. Holmberg, K., Erdemir, A.: Influence of tribology on global energy consumption, costs and emissions. Friction 5, 263–284 (2017)10.1007/s40544-017-0183-5 ↗
3. Spear, J.C., Ewers, B.W., Batteas, J.D.: 2D-nanomaterials for controlling friction and wear at interfaces. Nano Today 10, 301–314 (2015)10.1016/j.nantod.2015.04.003 ↗
4. Elinski, M.B., Liu, Z., Spear, J.C., Batteas, J.D.: 2D or not 2D? The impact of nanoscale roughness and substrate interactions on the tribological properties of graphene and MoS2. J. Phys. D Appl. Phys. 50, 103003–314 (2017)10.1088/1361-6463/aa58d6 ↗
5. Rosenkranz, A., Liu, Y., Yang, L., Chen, L.: 2D nano-materials beyond graphene: from synthesis to tribological studies Appl. Nanoscience 10, 3353–3388 (2020)10.1007/s13204-020-01466-z ↗
6. Wu, S., He, F., Xie, G., Bian, Z., Ren, Y., Liu, X., Yang, H., Guo, D., Zhang, L., Wen, S., Luo, J.: Super-slippery degraded black phosphorus/silicon dioxide interface. ACS Appl. Mater. Interfaces 12, 7717–7726 (2020)10.1021/acsami.9b19570 ↗
7. Wu, S., He, F., Xie, G., Bian, Z., Luo, J., Wen, S.: Black phosphorus: degradation favors lubrication. Nano Lett. 18, 5618–5627 (2018)10.1021/acs.nanolett.8b02092 ↗
8. Cui, Z., Xie, G., He, F., Wang, W., Guo, D., Wang, W.: Atomic-scale sriction of black phosphorus: effect of thickness and anisotropic behavior. Adv. Mater. Interf. 4, 1–9 (2017)10.1002/admi.201700998 ↗
9. Galluzzi, M., Zhang, Y., Yu, X.-F.: Mechanical properties and applications of 2D black phosphorus. J. Appl. Phys. 128, 230903 (2020)10.1063/5.0034893 ↗
10. Wang, W., Xie, G., Luo, J.: Superlubricity of black phosphorus as lubricant additive. ACS Appl. Mater. Interfaces 10, 43203–43210 (2018)10.1021/acsami.8b14730 ↗
11. Losi, G., Restuccia, P., Righi, M.C.: Superlubricity in phosphorene identified by means of ab initio calculations. 2D Mater. 7, 025033 (2020)10.1088/2053-1583/ab72d7 ↗
12. De Barros-Bouchet, M.I., Righi, M.C., Philippon, D., Mambingo-Doumbe, S., Le-Mogne, T., Martin, J.M., Bouffet, A.: Tribochemistry of phosphorus additives: experiments and first-principles calculations. RSC Adv. 5, 49270–49279 (2015)10.1039/C5RA00721F ↗
13. Righi, M.C., Loehlé, S., De Barros Bouchet, M.I., Mambingo-Doumbe, S., Martin, J.M.: A comparative study on the functionality of s- and p-based lubricant additives by combined first principles and experimental analysis. RSC Adv. 6, 47753–47760 (2016)10.1039/C6RA07545B ↗
14. Loehlé, S., Righi, M.C.: Ab initio molecular dynamics simulation of tribochemical reactions involving phosphorus additives at sliding iron interfaces Lubricants 6, 31 (2018)10.3390/lubricants6020031 ↗
15. Loehlé, S., Righi, M.C.: First principles study of organophosphorus additives in boundary lubrication conditions: effects of hydrocarbon chain length. Lubr. Sci. 29, 485–491 (2017)10.1002/ls.1382 ↗
16. Fatti, G., Restuccia, P., Calandra, C., Righi, M.C.: Phosphorus adsorption on fe(110): an ab initio comparative study of iron passivation by different adsorbates. J. Phys. Chem. C 122, 28105–28112 (2018)10.1021/acs.jpcc.8b08831 ↗
17. De Barros Bouchet, M.I., Martin, J.M., Le Mogne, T., Bilas, P., Vacher, B., Yamada, Y.: Mechanisms of mos2 formation by modtc in presence of zndtp: effect of oxidative degradation. Wear 258, 1643–1650 (2005)10.1016/j.wear.2004.11.019 ↗
18. Martin, J.-M., Grossiord, C., Mogne, T.L., Igarashi, J.: Transfer films and friction under boundary lubrication. Wear 245, 107–115 (2000)10.1016/S0043-1648(00)00471-3 ↗
19. Losi, G., Peeters, S., Delayens, F., Vezin, H., Loehlé, S., Thiebaut, B., Righi, M.C.: Experimental and ab initio characterization of mononuclear molybdenum dithiocarbamates in lubricant mixtures. Langmuir 37, 4836–4846 (2021)10.1021/acs.langmuir.1c00029 ↗
20. Marchetto, D., Restuccia, P., Ballestrazzi, A., Righi, M.C., Rota, A., Valeri, S.: Surface passivation by graphene in the lubrication of iron: A comparison with bronze. Carbon 116, 375–380 (2017)10.1016/j.carbon.2017.02.011 ↗
21. Restuccia, P., Righi, M.C.: Tribochemistry of graphene on iron and its possible role in lubrication of steel. Carbon 106, 118–124 (2016)10.1016/j.carbon.2016.05.025 ↗
22. Berman, D., Erdemir, A., Sumant, A.V.: Graphene: a new emerging lubricant. Mater. Today 17, 31–42 (2014)10.1016/j.mattod.2013.12.003 ↗
23. Berman, D., Erdemir, A., Sumant, A.V.: Few layer graphene to reduce wear and friction on sliding steel surfaces. Carbon 54, 454–459 (2013)10.1016/j.carbon.2012.11.061 ↗
24. Berman, D., Erdemir, A., Sumant, A.V.: Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen. Carbon 59, 167–175 (2013)10.1016/j.carbon.2013.03.006 ↗
25. Giannozzi, P., Baroni, S., Bonini, N., Calandra, M., Car, R., Cavazzoni, C., Ceresoli, D., Chiarotti, G.L., Cococcioni, M., Dabo, I., Corso, A.D., de Gironcoli, S., Fabris, S., Fratesi, G., Gebauer, R., Gerstmann, U., Gougoussis, C., Kokalj, A., Lazzeri, M., Martin-Samos, L., Marzari, N., Mauri, F., Mazzarello, R., Paolini, S., Pasquarello, A., Paulatto, L., Sbraccia, C., Scandolo, S., Sclauzero, G., Seitsonen, A.P., Smogunov, A., Umari, P., Wentzcovitch, R.M.: Quantum espresso: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter. 21, 395502 (2009)10.1088/0953-8984/21/39/395502 ↗
26. Giannozzi, P., Andreussi, O., Brumme, T., Bunau, O., Nardelli, M.B., Calandra, M., Car, R., Cavazzoni, C., Ceresoli, D., Cococcioni, M., Colonna, N., Carnimeo, I., Corso, A.D., de Gironcoli, S., Delugas, P., Jr., R.A.D., Ferretti, A., Floris, A., Fratesi, G., Fugallo, G., Gebauer, R., Gerstmann, U., Giustino, F., Gorni, T., Jia, J., Kawamura, M., Ko, H.-Y., Kokalj, A., Küçükbenli, E., Lazzeri, M., Marsili, M., Marzari, N., Mauri, F., Nguyen, N.L., Nguyen, H.-V., Otero-de-la-Roza, A., Paulatto, L., Poncé, S., Rocca, D., Sabatini, R., Santra, B., Schlipf, M., Seitsonen, A.P., Smogunov, A., Timrov, I., Thonhauser, T., Umari, P., Vast, N., Wu, X., Baroni, S.: Advanced capabilities for materials modelling with quantum espresso. J. Phys. Condens. Matter. 29, 465901 (2017)10.1088/1361-648X/aa8f79 ↗
27. Vanderbilt, D.: Soft self-consistent pseudopotentials in a generalized eigenvalue formalism. Phys. Rev. B 41, 7892–7895 (1990)10.1103/PhysRevB.41.7892 ↗
28. Perdew, J.P., Burke, K., Ernzerhof, M.: Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996)10.1103/PhysRevLett.77.3865 ↗
29. Grimme, S.: Semiempirical gga-type density functional constructed with a long-range dispersion correction. J. Comput. Chem. 27, 1787–1799 (2006)10.1002/jcc.20495 ↗
30. Cutini, M., Corno, M., Ugliengo, P.: Method Dependence of Proline Ring Flexibility in the Poly-L-Proline Type II Polymer. J. Chem. Theory Comput. 13, 370–379 (2017)10.1021/acs.jctc.6b01045 ↗
31. Cutini, M., Bocus, M., Ugliengo, P.: Decoding collagen triple helix stability by means of hybrid DFT simulations. J. Phys. Chem. B 123, 7354–7364 (2019)10.1021/acs.jpcb.9b05222 ↗
32. Cutini, M., Bechis, I., Corno, M., Ugliengo, P.: Balancing cost and accuracy in quantum mechanical simulations on collagen protein models. J. Chem. Theory Comput. 17, 2566–2574 (2021)10.1021/acs.jctc.1c00015 ↗
33. Cutini, M., Pantaleone, S., Ugliengo, P.: Elucidating the nature of interactions in collagen triple-helix wrapping. J. Phys. Chem. Lett. 10, 7644–7649 (2019)10.1021/acs.jpclett.9b03125 ↗
34. Cutini, M., Ugliengo, P.: Infrared harmonic features of collagen models at B3LYP-D3: from amide bands to the thz region. J. Chem. Phys. 155, 075102 (2021)10.1063/5.0056422 ↗
35. Cutini, M., Corno, M., Costa, D., Ugliengo, P.: How does collagen adsorb on hydroxyapatite? Insights from Ab initio simulations on a polyproline type II model. J. Phys. Chem. C 123, 7540–7550 (2019)10.1021/acs.jpcc.7b10013 ↗
36. Cutini, M., Civalleri, B., Ugliengo, P.: Cost-effective quantum mechanical approach for predicting thermodynamic and mechanical stability of pure-silica Zeolites. ACS Omega 4, 1838–1846 (2019)10.1021/acsomega.8b03135 ↗
37. Ilawe, N.V., Zimmerman, J.A., Wong, B.M.: Breaking badly: DFT-D2 gives sizeable errors for tensile strengths in palladium-hydride solids. J. Chem. Theory Comput. 11, 5426–5435 (2015)10.1021/acs.jctc.5b00653 ↗
38. Shao, L., Ye, H., Wu, Y., Yinxiao, D., Ding, P., Zeng, F., Yuan, Q.: Interaction between phosphorene and the surface of a substrate. Mater. Res. Express. 3, 025013 (2016)10.1088/2053-1591/3/2/025013 ↗
39. Shulenburger, L., Baczewski, A.D., Zhu, Z., Guan, J., Tománek, D.: The nature of the interlayer interaction in bulk and few-layer phosphorus. Nano Lett. 15, 8170–8175 (2015)10.1021/acs.nanolett.5b03615 ↗
40. Levita, G., Cavaleiro, A., Molinari, E., Polcar, T., Righi, M.C.: Sliding properties of MoS2 layers: load and interlayer orientation effects. J. Phys. Chem. C 118, 13809–13816 (2014)10.1021/jp4098099 ↗
41. Levita, G., Molinari, E., Polcar, T., Righi, M.C.: First-principles comparative study on the interlayer adhesion and shear strength of transition-metal dichalcogenides and graphene. Phys. Rev. B 92, 085434 (2015)10.1103/PhysRevB.92.085434 ↗
42. Levita, G., Restuccia, P., Righi, M.C.: Graphene and MoS2 interacting with water: a comparison by ab initio calculations. Carbon 107, 878–884 (2016)10.1016/j.carbon.2016.06.072 ↗
43. Wolloch, M., Losi, G., Ferrario, M., Righi, M.C.: High-throughput screening of the static friction and ideal cleavage strength of solid interfaces. Sci. Rep. 9, 17062 (2019)10.1038/s41598-019-49907-2 ↗
44. Fantauzzi, M., Secci, F., Sanna Angotzi, M., Passiu, C., Cannas, C., Rossi, A.: Nanostructured spinel cobalt ferrites: Fe and co chemical state, cation distribution and size effects by x-ray photoelectron spectroscopy. RSC Adv. 9, 19171–19179 (2019)10.1039/C9RA03488A ↗
45. Peeters, S., Charrin, C., Duron, I., Loehlé, S., Thiebaut, B., Righi, M.C.: Importance of the catalytic effect of the substrate in the functionality of lubricant additives: the case of molybdenum dithiocarbamates. Mater. Today Chem. 21, 100487 (2021)10.1016/j.mtchem.2021.100487 ↗
46. Restuccia, P., Levita, G., Wolloch, M., Losi, G., Fatti, G., Ferrario, M., Righi, M.C.: Ideal adhesive and shear strengths of solid interfaces: a high throughput ab initio approach. Comput. Mater. Sci. 154, 517–529 (2018)10.1016/j.commatsci.2018.08.006 ↗
47. Zilibotti, G., Righi, M.C.: Ab initio calculation of the adhesion and ideal shear strength of planar diamond interfaces with different atomic structure and hydrogen coverage. Langmuir 27, 6862–6867 (2011)10.1021/la200783a ↗
48. E, W., Ren, W., Vanden-Eijnden, E.: Simplified and improved string method for computing the minimum energy paths in barrier-crossing events. J. Chem. Phys. 126, 164103 (2007)10.1063/1.2720838 ↗
49. Pan, Y., Wang, Y., Ye, M., Quhe, R., Zhong, H., Song, Z., Peng, X., Yu, D., Yang, J., Shi, J., Lu, J.: Monolayer phosphorene-metal contacts. Chem. Mater. 28, 2100–2109 (2016)10.1021/acs.chemmater.5b04899 ↗
50. Wolloch, M., Levita, G., Restuccia, P., Righi, M.C.: Interfacial charge density and its connection to adhesion and frictional forces. Phys. Rev. Lett. 121, 026804 (2018)10.1103/PhysRevLett.121.026804 ↗
51. Wang, W., Xie, G., Luo, J.: Black phosphorus as a new lubricant. Friction 6, 116–142 (2018)10.1007/s40544-018-0204-z ↗