journal article·2019-04

Compressive behaviour of uniaxially aligned individual mineralised collagen fibres at the micro- and nanoscale

Alexander Groetsch, Aurélien Gourrier, Jakob Schwiedrzik, Michael Sztucki, Rainer J. Beck, Jonathan D. Shephard, Johann Michler, Philippe K. Zysset, Uwe Wolfram

Acta Biomaterialia· Volume 89
Publisher page

Abstract

The increasing incidence of osteoporotic bone fractures makes fracture risk prediction an important clinical challenge. Computational models can be utilised to facilitate such analyses. However, they critically depend on bone's underlying hierarchical material description. To understand bone's irreversible behaviour at the micro- and nanoscale, we developed an in situ testing protocol that allows us to directly relate the experimental data to the mechanical behaviour of individual mineralised collagen fibres and its main constitutive phases, the mineralised collagen fibrils and the mineral nanocrystals, by combining micropillar compression of single fibres with small angle X-ray scattering (SAXS) and X-ray diffraction (XRD). Failure modes were assessed by SEM. Strain ratios in the elastic region at fibre, fibril and mineral levels were found to be approximately 22:5:2 with strain ratios at the point of compressive strength of 0.23 ± 0.11 for fibril-to-fibre and 0.07 ± 0.01 for mineral-to-fibre levels. Mineral-to-fibre levels showed highest strain ratios around the apparent yield point, fibril-to-fibre around apparent strength. The mineralised collagen fibrils showed a delayed mechanical response, contrary to the mineral phase, which points towards preceding deformations of mineral nanocrystals in the extrafibrillar matrix. No damage was measured at the level of the mineralised collagen fibre which indicates an incomplete separation of the mineral and collagen, and an extrafibrillar interface failure. The formation of kink bands and the gradual recruitment of fibrils upon compressive loading presumably led to localised strains. Our results from a well-controlled fibrillar architecture provide valuable input for micromechanical models and computational non-linear bone strength analyses that may provide further insights for personalised diagnosis and treatment as well as bio-inspired implants for patients with bone diseases. STATEMENT OF SIGNIFICANCE: Musculoskeletal diseases such as osteoporosis, osteoarthritis or bone cancer significantly challenge health care systems and make fracture risk prediction and treatment optimisation important clinical goals. Computational methods such as finite element models have the potential to optimise analyses but highly depend on underlying material descriptions. We developed an in situ testing set-up to directly relate experimental data to the mechanical behaviour of bone's fundamental building block, the individual mineralised collagen fibre and its main constituents. Low multilevel strain ratios suggest high deformations in the extrafibrillar matrix and energy dissipation at the interfaces, the absence of damage indicates both an incomplete separation between mineral and collagen and an extrafibrillar interface failure. The formation of kink bands in the fibril-reinforced composite presumably led to localised strains. The deformation behaviour of a well-controlled fibrillar architecture provides valuable input for non-linear bone strength analyses.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Collagen: Extraction and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. The mechanical properties of bone in osteoporosis10.1302/0301-620X.63B2.7217148 ↗
2. Age-related structural changes in trabecular and cortical bone: cellular mechanisms and biomechanical consequences10.1007/BF02406145 ↗
3. BMS Study Group · 2010
4. Hr-pqct based fe analysis of the most distal radius section provides an improved prediction of colles’ fracture load in vitro10.1016/j.bone.2010.08.002 ↗
5. Multiscale damage and strength of lamellar bone modeled by cohesive finite elements10.1016/j.jmbbm.2013.05.025 ↗
6. Clinical versus pre-clinical fe models for vertebral body strength predictions10.1016/j.jmbbm.2012.11.018 ↗
7. Comparison of proximal femur and vertebral body strength improvements in the freedom trial using an alternative finite element methodology10.1016/j.bone.2015.06.025 ↗
8. Sensitivity analysis and parametric study of elastic properties of an unidirectional mineralized bone fibril-array using mean field methods10.1007/s10237-010-0190-1 ↗
9. A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales10.1007/s10237-013-0472-5 ↗
10. Finite element-based mechanical assessment of bone quality on the basis of in vivo images10.1007/s11914-016-0335-y ↗
11. Micro-CT-based screening of biomechanical and structural properties of bone tissue engineering scaffolds10.1007/s11517-006-0071-z ↗
12. 5.502 – engineering scaffold mechanical and mass transport properties
13. Nanostructured scaffolds for bone tissue engineering10.1002/jbm.a.34539 ↗
14. Three-dimensional ordered distribution of crystals in turkey tendon collagen fibers10.1073/pnas.86.24.9822 ↗
15. Mineralized collagen fibrils: a mechanical model with a staggered arrangement of mineral particles10.1016/S0006-3495(00)76426-5 ↗
16. The material bone: structure-mechanical function relations10.1146/annurev.matsci.28.1.271 ↗
17. Mechanical properties and the hierarchical structure of bone10.1016/S1350-4533(98)00007-1 ↗
18. Micromechanical model for ultrastructural stiffness of mineralized tissues
19. Nature’s hierarchical materials10.1016/j.pmatsci.2007.06.001 ↗
20. A model for the distribution of hap crystallites in bone—an hypothesis10.1007/BF02441161 ↗
21. The loci of mineral in turkey leg tendon as seen by atomic force microscope and electron microscopy10.1007/BF00425873 ↗
22. Atomic force microscopic studies on the structure of bovine femoral cortical bone at the collagen fibril-mineral level
23. Sacrificial bonds and hidden length dissipate energy as mineralized fibrils separate during bone fracture10.1038/nmat1428 ↗
24. Fragility of bone material controlled by internal interfaces10.1007/s00223-015-9978-4 ↗
25. Biological materials: structure and mechanical properties10.1016/j.pmatsci.2007.05.002 ↗
26. An anisotropic elastic-viscoplastic damage model for bone tissue10.1007/s10237-012-0392-9 ↗
27. Bone hierarchical structure in three dimensions10.1016/j.actbio.2014.05.024 ↗
28. High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone10.1016/S0021-9290(00)00149-4 ↗
29. Nanoscale deformation mechanisms and yield properties of hydrated bone extracellular matrix10.1016/j.actbio.2017.07.030 ↗
30. Post-yield and failure properties of cortical bone10.1038/bonekey.2016.60 ↗
31. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
32. Averaging theorems in finite deformation plasticity10.1016/S0167-6636(98)00073-8 ↗
33. Universal microstructural patterns in cortical and trabecular, extracellular and extravascular bone materials: micromechanics-based prediction of anisotropic elasticity10.1016/j.jtbi.2006.09.013 ↗
34. Mechanical properties of nanostructure of biological materials10.1016/j.jmps.2004.03.006 ↗
35. In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone10.1038/nmat3959 ↗
36. Collagen-mineral axial relationship in calcified turkey leg tendon by X-ray and neutron diffraction10.1038/266421a0 ↗
37. Mineral crystals in calcified tissues: a comparative study by saxs10.1002/jbmr.5650070313 ↗
38. Mineral and organic matrix interaction in normally calcifying tendon visualized in three dimensions by high-voltage electron microscopic tomography and graphic image reconstruction10.1006/jsbi.1993.1003 ↗
39. Synchrotron diffraction study of deformation mechanisms in mineralized tendon10.1103/PhysRevLett.93.158101 ↗
40. Influence of mineralization and microporosity on tissue elasticity: experimental and numerical investigation on mineralized turkey leg tendons10.1007/s00223-012-9578-5 ↗
41. Structure-mechanics relationships in mineralized tendons10.1016/j.jmbbm.2015.03.013 ↗
42. Structure and mechanical quality of the collagen-mineral nano-composite in bone10.1039/B402005G ↗
43. On the elastic properties of mineralized turkey leg tendon tissue: multiscale model and experiment10.1007/s10237-013-0550-8 ↗
44. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
45. Extracellular bone matrix exhibits hardening elastoplasticity and more than double cortical strength: evidence from homogeneous compression of non-tapered single micron-sized pillars welded to a rigid substrate10.1016/j.jmbbm.2015.03.001 ↗
46. The nanocomposite nature of bone drives its strength and damage resistance10.1038/nmat4719 ↗
47. Calcified turkey leg tendon as structural model for bone mineralization10.1016/0141-8130(88)90005-0 ↗
48. Radial packing, order, and disorder in collagen fibrils10.1016/S0006-3495(95)80391-7 ↗
49. Collagen packing and mineralization. An x-ray scattering investigation of turkey leg tendon10.1016/S0006-3495(93)81362-6 ↗
50. Bone mineralization as studied by small-angle x-ray scattering10.3109/03008209609005268 ↗
51. A consensus model for molecular packing of type i collagen10.1006/jsbi.1998.3991 ↗
52. Microfibrillar structure of type i collagen in situ10.1073/pnas.0502718103 ↗
53. Internal strains and stresses measured in cortical bone via high-energy x-ray diffraction10.1016/j.jsb.2005.08.003 ↗
54. Nanoscale deformation mechanisms in bone10.1021/nl051584b ↗
55. Cooperative deformation of mineral and collagen in bone at the nanoscale10.1073/pnas.0604237103 ↗
56. Micromechanical response of mineral and collagen phases in bone10.1016/j.jsb.2006.09.001 ↗
57. Lateral packing of mineral crystals in bone collagen fibrils10.1529/biophysj.107.128355 ↗
58. Load transfer in bovine plexiform bone determined by synchrotron x-ray diffraction10.1557/JMR.2008.0068 ↗
59. Inhomogeneous fibril stretching in antler starts after macroscopic yielding: indication for a nanoscale toughening mechanism10.1016/j.bone.2009.02.009 ↗
60. Scanning small-angle x-ray scattering analysis of the size and organization of the mineral nanoparticles in fluorotic bone using a stack of cards model10.1107/S0021889810035090 ↗
61. Variability in the elastic properties of bovine dentin at multiple length scales10.1016/j.jmbbm.2011.08.005 ↗
62. Multiscale alterations in bone matrix quality increased fragility in steroid induced osteoporosis
63. X-ray diffraction as a promising tool to characterize bone nanocomposites10.1088/1468-6996/12/6/064708 ↗
64. The compressive properties of single osteons10.1002/ar.1091610309 ↗
65. An approach to the mechanical properties of single osteonic lamellae10.1016/0021-9290(73)90044-4 ↗
66. X-ray diffraction on cyclically loaded osteons10.1007/s002239900428 ↗
67. Nano-mechanical properties of individual mineralized collagen fibrils from bone tissue10.1098/rsif.2010.0413 ↗
68. Nanointerfacial strength between non-collagenous protein and collagen fibrils in antler bone10.1098/rsif.2013.0993 ↗
69. X-ray phase nanotomography resolves the 3D human bone ultrastructure10.1371/journal.pone.0035691 ↗
70. Investigation of the 3D orientation of mineralized collagen fibrils in human lamellar bone using synchrotron x-ray phase nano-tomography10.1016/j.actbio.2013.05.015 ↗
71. Synchrotron x-ray phase nano-tomography-based analysis of the lacunar-canalicular network morphology and its relation to the strains experienced by osteocytes in situ as predicted by case-specific finite element analysis10.1007/s10237-014-0601-9 ↗
72. Multimodal correlative investigation of the interplaying micro-architecture, chemical composition and mechanical properties of human cortical bone tissue reveals predominant role of fibrillar organization in determining microelastic tissue properties10.1016/j.actbio.2016.08.001 ↗
73. Observations of multiscale, stress-induced changes of collagen orientation in tendon by polarized raman spectroscopy10.1021/bm201008b ↗
74. Polarized raman anisotropic response of collagen in tendon: towards 3d orientation mapping of collagen in tissues10.1371/journal.pone.0063518 ↗
75. 3d raman mapping of the collagen fibril orientation in human osteonal lamellae10.1016/j.jsb.2014.07.001 ↗
76. Fractal-like hierarchical organization of bone begins at the nanoscale10.1126/science.aao2189 ↗
77. The structure and function of normally mineralizing avian tendons10.1016/S1095-6433(02)00248-9 ↗
78. Micropillar fabrication on bovine cortical bone by direct-write femtosecond laser ablation10.1117/1.3268444 ↗
79. Mechanisms of pulsed laser ablation of biological tissues10.1021/cr010379n ↗
80. Direct-write patterning of indium-tin-oxide film by high pulse repetition frequency femtosecond laser ablation10.1364/AO.46.005792 ↗
81. Focus variation instruments
82. SRIM – the stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
83. Plastic deformation of gallium arsenide micropillars under uniaxial compression at room temperature10.1063/1.2432277 ↗
84. Ultrastructural examination of dentin using focused ion-beam cross-sectioning and transmission electron microscopy10.1016/j.micron.2005.05.011 ↗
85. On the effect of x-ray irradiation on the deformation and fracture behavior of human cortical bone10.1016/j.bone.2010.02.025 ↗
86. Characterization of the effects of x-ray irradiation on the hierarchical structure and mechanical properties of human cortical bone10.1016/j.biomaterials.2011.08.013 ↗
87. Core · 2013
88. SciPy: open source scientific tools for
89. T.E. Oliphant, Guide to numpy, 2006.
90. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
91. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
92. Holzapfel · 2000
93. Elastic strains in antler trabecular bone determined by synchrotron x-ray diffraction10.1016/j.actbio.2008.05.008 ↗
94. Synchrotron x-ray diffraction study of load partitioning during elastic deformation of bovine dentin10.1016/j.actbio.2009.11.017 ↗
95. A new model to simulate the elastic properties of mineralized collagen fibril10.1007/s10237-010-0223-9 ↗
96. Long x-ray diffraction spacings of collagen10.1021/ja01255a511 ↗
97. X-ray diffraction studies on protein fibers. i. The large fiber-axis period of collagen10.1021/ja01236a027 ↗
98. Low-angle x-ray diffraction pattern of collagen10.1038/162023a0 ↗
99. Modeling the lateral organization of collagen molecules in fibrils using the paracrystal concept10.1016/j.jsb.2010.11.018 ↗
100. Understanding hierarchy and functions of bone using scanning x-ray scattering methods