journal article·2023-04-24Open access

The effect of different treatments on abaca fibers used in cementitious composites

S. Alcivar-Bastidas, Daniel M. Petroche, M. J. Martinez-Echevarria

Journal of Natural Fibers· Volume 20· Issue 1

Abstract

The use of natural fibers including abaca has increased because of its advantages such as lightweight, low price, life-cycle superiority, and substitute for synthetic fibers. This paper gives an insight into the effect of three different treatments on abaca fibers: hornification, NaOH 3% concentration solution, and a coating of silica fume with natural latex into cementitious composites; fibers have been characterized before and after through SEM, XRD, FT-IR, TGA, and tensile tests to analyze structural and chemical changes. Cementitious composites through setting time and flexural strength (7, 14, 28 days) were analyzed for determining the optimum treatment and, afterward, the best dosage and length. It was found that HS treatment with 30 mm and 0.2% dosage showed 8.2 MPa in terms of flexural strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Construction Engineering and Projects of Engineering, University of Granada, Granada, Spain

Facultad de Ingeniería, Universidad Católica de Santiago de Guayaquil, Guayaquil, Ecuador

Facultad de Ingeniería en Mecánica y Ciencias de la Producción, Escuela Superior Politécnica del Litoral, ESPOL, Guayaquil, Ecuador

Funding

Universidad Católica de Santiago de Guayaquil

References (28)

Show source-provided references
1. AENOR. 2000. UNE-EN 1015-3:2000/A2:2007. Métodos de ensayo para morteros de albañilería. Parte 3: Determinación de la consistencia del mortero fresco (por la mesa de sacudidas). Asociación Española de Normalización y Certificación 10:11.
2. AENOR. 2018. UNE-EN 196-1. Métodos de ensayo de cementos. Parte 1: Determinación de resistencias. Asociación Española de Normalización y Certificación 22:35.
3. 10.1520/C0144-1810.1520/C0144-18 ↗
4. 10.1520/C1157_C1157M-20A10.1520/C1157_C1157M-20A ↗
5. 10.1016/j.compositesb.2018.07.01710.1016/j.compositesb.2018.07.017 ↗
6. 10.1016/j.cemconres.2018.10.00410.1016/j.cemconres.2018.10.004 ↗
7. 10.1016/j.indcrop.2014.11.04810.1016/j.indcrop.2014.11.048 ↗
8. 10.1016/j.compositesa.2016.08.02510.1016/j.compositesa.2016.08.025 ↗
9. 10.1016/j.conbuildmat.2018.03.02910.1016/j.conbuildmat.2018.03.029 ↗
10. 10.1016/j.susmat.2017.04.00310.1016/j.susmat.2017.04.003 ↗
11. 10.1016/j.proeng.2016.11.86210.1016/j.proeng.2016.11.862 ↗
12. 10.1016/j.conbuildmat.2015.10.12010.1016/j.conbuildmat.2015.10.120 ↗
13. 10.1016/j.conbuildmat.2016.10.00410.1016/j.conbuildmat.2016.10.004 ↗
14. 10.1016/j.compositesb.2017.12.01610.1016/j.compositesb.2017.12.016 ↗
15. INEN. 2015. NTE INEN 2615:2012, Cemento Para Mortero. Requisitos. Quito: Instituto Ecuatoriano de Normalización.
16. 10.1016/j.jobe.2018.05.02810.1016/j.jobe.2018.05.028 ↗
17. 10.1016/j.corsci.2016.01.02010.1016/j.corsci.2016.01.020 ↗
18. 10.1016/j.bioactmat.2022.04.00210.1016/j.bioactmat.2022.04.002 ↗
19. 10.1016/j.compositesa.2012.09.00610.1016/j.compositesa.2012.09.006 ↗
20. 10.1016/j.conbuildmat.2020.11960210.1016/j.conbuildmat.2020.119602 ↗
21. 10.1016/j.cemconcomp.2016.02.01410.1016/j.cemconcomp.2016.02.014 ↗
22. 10.1016/j.conbuildmat.2010.07.02410.1016/j.conbuildmat.2010.07.024 ↗
23. 10.1016/j.indcrop.2012.06.02510.1016/j.indcrop.2012.06.025 ↗
24. 10.1016/J.BIORTECH.2018.04.06410.1016/J.BIORTECH.2018.04.064 ↗
25. 10.1177/00405175590290100310.1177/004051755902901003 ↗
26. 10.1016/B978-0-12-818398-4.00008-610.1016/B978-0-12-818398-4.00008-6 ↗
27. 10.1016/j.matpr.2017.07.25110.1016/j.matpr.2017.07.251 ↗
28. 10.1007/s10924-006-0042-310.1007/s10924-006-0042-3 ↗