Influence of the Extraction Process on the Mechanical and Morphological Properties of Technical Fibers from Typha domingensis
Source abstract
Abstract
Typha is a fast-growing and invasive plant that spreads in the humid areas. Its proliferation has a negative impact on the local ecosystems. This study aims at the valorization of the by-products of this plant as biocomposites’ reinforcements. A mechanical extraction technique and retting in distilled water and sea water processes were developed to extract fibers from the leaves and stems of the Typha plants. SEM, FTIR analyses and monotonic tensile tests have been carried out to assess fibers’ properties. Morphological observations revealed that fibers extracted from the leaves were on average 48% finer than those from the stems. This fineness was more significant for the fibers retted in distilled water, that presented a smoother surface. The leaf fibers tensile properties (502, 247 and 372 MPa for the strength, 20.5, 14.2 and 12.8 GPa for the Young’s modulus and 2.47, 1.68 and 2.73% for maximum strain, respectively for the mechanical, distilled water and sea water retting processes) were on average 50% higher than for stem fibers, regardless of the extraction method. The results showed that the fibers elaborated had promising properties for biocomposite reinforcement. The extraction methods developed are low cost and without the use and generation of polluting chemicals
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
ENSETP, Cheikh Anta Diop University of Dakar, UCAD, Dakar, Senegal
References (35)
Show source-provided references
1. 10.1016/j.rinma.2021.10023810.1016/j.rinma.2021.100238 ↗
2. 10.1002/pc.2011810.1002/pc.20118 ↗
3. 10.1016/j.indcrop.2023.11691210.1016/j.indcrop.2023.116912 ↗
4. 10.1016/j.envint.2003.09.00310.1016/j.envint.2003.09.003 ↗
5. 10.1016/j.bamboo.2024.10007010.1016/j.bamboo.2024.100070 ↗
6. 10.1016/j.matdes.2012.09.04810.1016/j.matdes.2012.09.048 ↗
7. Belouadah, Z., A. Ati, M. Rokbi, A. Bezazi, and A. Imad. 2014. “Optimisation des méthodes d’extraction et de caractérisation mécanique de la fibre Alfa en vue de son application comme renfort des matériaux composites.” Journal of Materials, Processes and Environment 2 (1): 51–57 .
8. 10.1016/j.heliyon.2022.e1012710.1016/j.heliyon.2022.e10127 ↗
9. 10.1002/(SICI)1097-4628(19990124)71:4<623:AID-APP14>3.0.CO;2-K10.1002/(SICI)1097-4628(19990124)71:4<623:AID-APP14>3.0.CO;2-K ↗
10. 10.1016/B978-0-12-818782-1.00006-710.1016/B978-0-12-818782-1.00006-7 ↗
11. FRD (Fibers Recherche Développement). 2012. Fibres et renforts végétaux Solutions composites. Troyes, France.
12. 10.1016/j.compositesa.2018.02.01810.1016/j.compositesa.2018.02.018 ↗
13. 10.1007/s10853-011-5639-910.1007/s10853-011-5639-9 ↗
14. Gomina, M., M. Rouch, A. Roy, and D. Duriatti. 2019. “Représentativité des essais de vieillissement accélérés dans le cas des composites biosourcés incorporant des fibres végétales.” 21ème Journées Nationales sur les Composites, July1–3, 2019, Bordeaux, 1–10. https://hal.science/hal-02420703v1/document
15. Gregoire, M., E. D. Luycker, and P. Ouagne. 2019. “Etude de l’extraction des fibres de chanvre longs brins et impact sur leur potentiel de renfort.” 24ème Congrès Français de Mécanique, Brest, 6.
16. 10.3390/polym1409168510.3390/polym14091685 ↗
17. 10.1016/j.compositesa.2008.07.00710.1016/j.compositesa.2008.07.007 ↗
18. 10.1016/0032-3861(96)00144-910.1016/0032-3861(96)00144-9 ↗
19. 10.1016/j.polymdegradstab.2005.02.00910.1016/j.polymdegradstab.2005.02.009 ↗
20. 10.1007/s12221-019-1087-y10.1007/s12221-019-1087-y ↗
21. 10.1016/S0144-8617(02)00157-110.1016/S0144-8617(02)00157-1 ↗
22. Mugnier, J. 2008. Nouvelle Flore illustrée du Sénégal et des régions voisines.“ In Flore illustrée du Sénégal, Vol. 6.
23. Ozenda, P. 1991. Flore et végétation du Sahara (3ème édition). Paris: Centre National de la Recherche Scientifique.
24. PNEEB Typha. 2014. Capitalisation des résultats de recherches et expérience sur le Typha.
25. Ponnukrishnan, P., M. T. Chithambara, and S. Richard. 2014. “Mechanical Charactreisation of Typha domingensis Natural Fiber Reinforced Polyester Composites.” American International Journal of Research in Science, Technology, Engineering & Mathematics 6 (3): 241–244. March.
26. 10.1007/s12221-021-0194-810.1007/s12221-021-0194-8 ↗
27. 10.1080/15440478.2020.176444310.1080/15440478.2020.1764443 ↗
28. 10.1016/j.compstruct.2005.07.02310.1016/j.compstruct.2005.07.023 ↗
29. Sana, R., J. Mounir, and M. Slah. 2014. “Study of Structure and Properties of Tunisian Typha Leaf Fibers.” International Journal of Engineering Research & Technology (IJERT) 3.
30. Sarr, N. L. 2003. “Aspects socio-économiques de la prolifération de Typha domingensis dans le delta du fleuve Sénégal. Mémoire de DEA, ISE.” Université Cheikh Anta Diop de Dakar: 49.
31. 10.1080/15440478.2022.214966110.1080/15440478.2022.2149661 ↗
32. 10.1080/15440478.2020.178791410.1080/15440478.2020.1787914 ↗
33. 10.1002/(SICI)1097-4628(19971031)66:5<821:AID-APP2>3.0.CO;2-X10.1002/(SICI)1097-4628(19971031)66:5<821:AID-APP2>3.0.CO;2-X ↗
34. Watt, G. 1893. Dictionary of Indian Medicinal Plants. Vol. 6. London.
35. 10.1016/S0141-3910(01)00163-X10.1016/S0141-3910(01)00163-X ↗